Woodbrass
Brand:
NS Design
Description from Woodbrass :
SPECIFICATIONS LENGTH: 132 cm (52) WIDTH: 15 cm (6) THICKNESS: 10 cm (4) WEIGHT: 4.8 kg (10.5 lbs.) SCALE LENGTH: 106 cm (41.73) STRINGS: 4 or 5 (Low B or high C). Equipped with NS Contemporary Bass Strings by D'Addario . Compatible with most standard upright bass strings. BODY/NECK: Solid, straight grain maple, with maple face (Satin Black model) or flame maple face (Sunburst model) on body. FINGERBOARD: Hand-graduated. Intonation referenced with cascading dot markers. TRUSS ROD: Single Action, accessible at nut. TUNING HARDWARE: 12:1 ratio, fully encased worm gear tuners, black finish. BRIDGE PICKUP: The Polar directional piezo pickup system responds selectively to either vertical vibration (for the sustained plucked sound, like an electric bass guitar), or lateral vibration (for dynamic bowing, and a percussive plucked sound). ELECTRONICS and CONTROLS: Rotary volume control, with push-pull selection between Active and Self-Powered output mode; Tone control (treble roll off); Arco/Pizzicato toggle switch. PERFORMANCE SUPPORT SYSTEMS NXT TRIPOD STAND: Standard with the NXTa, black painted steel, fully adjustable, self-standing tripod design. Folds for easy storage and fits into the NXT gig bag. Weight is 2.7 kg (6 lbs.). CR TRIPOD STAND: Optional, fully adjustable steel tripod stand. Weight is 3.6kg (8 lbs.). BASS END PIN STAND: The optional Bass End Pin Stand offers full freedom of movement. Height, tilt and right bout angle are fully adjustable providing a more conventional feel. Weight 3 kg (7 lbs). BASS END PIN STAND CONVERSION KIT: To hold the instrument upright for on-stand performance or when not in use, the Bass End Pin Stand can be attached to the CR Tripod Stand (not compatible with the NXT Tripod Stand) using the optional End Pin Stand Conversion Kit. BOOMERANG STRAP SYSTEM: This optional support system has a pivoting friction hub that holds the instrument firmly in place close to the body. Attached with a guitar style strap to its two support arms, the system allows the instrument to be moved into virtually any position in relation to the hands and body as it is played. Weight is .45 kg (1 lbs.). FRAME STRAP SYSTEM: This optional accessory is a lightweight frame structure that allows full mobility to perform in standing or upright position, holding the instrument out from the body similar to the reference in traditional positioning. The system is supported by a single guitar style strap extending over the left shoulder. Weight is 0.68kg (1.5 lbs.). TRANSPORT GIG BAG: A padded gig bag is included as a standard accessory. It has a stand compartment, bow compartment, charger and accessory pocket, handle and adjustable shoulder strap. Loaded weight is 11.2 kg (25 lbs.) including stand, and it fits in the overhead luggage compartment of most commercial aircraft. FLIGHT CASE: Optional, aluminum edged plywood, 145 cm (57) long; 25 cm (10) wide; 25 cm (10) high. Loaded weight is 22 kg (48 Ibs.), including stand.
SPECIFICATIONS LENGTH: 132 cm (52) WIDTH: 15 cm (6) THICKNESS: 10 cm (4) WEIGHT: 4.8 kg (10.5 lbs.) SCALE LENGTH: 106 cm (41.73) STRINGS: 4 or 5 (Low B or high C). Equipped with NS Contemporary Bass Strings by D'Addario . Compatible with most standard upright bass strings. BODY/NECK: Solid, straight grain maple, with maple face (Satin Black model) or flame maple face (Sunburst model) on body. FINGERBOARD: Hand-graduated. Intonation referenced with cascading dot markers. TRUSS ROD: Single Action, accessible at nut. TUNING HARDWARE: 12:1 ratio, fully encased worm gear tuners, black finish. BRIDGE PICKUP: The Polar directional piezo pickup system responds selectively to either vertical vibration (for the sustained plucked sound, like an electric bass guitar), or lateral vibration (for dynamic bowing, and a percussive plucked sound). ELECTRONICS and CONTROLS: Rotary volume control, with push-pull selection between Active and Self-Powered output mode; Tone control (treble roll off); Arco/Pizzicato toggle switch. PERFORMANCE SUPPORT SYSTEMS NXT TRIPOD STAND: Standard with the NXTa, black painted steel, fully adjustable, self-standing tripod design. Folds for easy storage and fits into the NXT gig bag. Weight is 2.7 kg (6 lbs.). CR TRIPOD STAND: Optional, fully adjustable steel tripod stand. Weight is 3.6kg (8 lbs.). BASS END PIN STAND: The optional Bass End Pin Stand offers full freedom of movement. Height, tilt and right bout angle are fully adjustable providing a more conventional feel. Weight 3 kg (7 lbs). BASS END PIN STAND CONVERSION KIT: To hold the instrument upright for on-stand performance or when not in use, the Bass End Pin Stand can be attached to the CR Tripod Stand (not compatible with the NXT Tripod Stand) using the optional End Pin Stand Conversion Kit. BOOMERANG STRAP SYSTEM: This optional support system has a pivoting friction hub that holds the instrument firmly in place close to the body. Attached with a guitar style strap to its two support arms, the system allows the instrument to be moved into virtually any position in relation to the hands and body as it is played. Weight is .45 kg (1 lbs.). FRAME STRAP SYSTEM: This optional accessory is a lightweight frame structure that allows full mobility to perform in standing or upright position, holding the instrument out from the body similar to the reference in traditional positioning. The system is supported by a single guitar style strap extending over the left shoulder. Weight is 0.68kg (1.5 lbs.). TRANSPORT GIG BAG: A padded gig bag is included as a standard accessory. It has a stand compartment, bow compartment, charger and accessory pocket, handle and adjustable shoulder strap. Loaded weight is 11.2 kg (25 lbs.) including stand, and it fits in the overhead luggage compartment of most commercial aircraft. FLIGHT CASE: Optional, aluminum edged plywood, 145 cm (57) long; 25 cm (10) wide; 25 cm (10) high. Loaded weight is 22 kg (48 Ibs.), including stand.
Manche : Érable
Touche : Ébène
Corps : Érable
Électronique : - Volume
- Tonalité
- Switch micro Polar•
Micros : Piezo Polar• System
Ce système peut capter latéralement et verticalement la vibration des cordes.
Divers : Longueur : 132 cm (52")
Largeur : 15 cm (6")
Épaisseur : 10 cm (4")
Vendu avec son Tripod Stand
Origine : République Tchèque
Etui : Étui fourni
Touche : Ébène
Corps : Érable
Électronique : - Volume
- Tonalité
- Switch micro Polar•
Micros : Piezo Polar• System
Ce système peut capter latéralement et verticalement la vibration des cordes.
Divers : Longueur : 132 cm (52")
Largeur : 15 cm (6")
Épaisseur : 10 cm (4")
Vendu avec son Tripod Stand
Origine : République Tchèque
Etui : Étui fourni
| Seller information : | Woodbrass |
| Place : | Nantes, France |
| Shipping : | Livraison Mondiale |
SIMILAR ITEMS
