Woodbrass
Brand:
RME
Description from Woodbrass :
Four years ago, the Babyface Pro again demonstrated RME s absolute commitment to superior craftsmanship, not only in audio circuits and driver development, but also in mechanics. Created with the highest precision from a block of aluminum, this high-end portable interface incorporated newly designed analog and digital circuits. Its innovative energy saving technologies provided supreme fidelity with no compromises in level, noise or distortion. In the new Babyface Pro FS even more improvements were implemented: - 19 / 4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monitors, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations. - Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity. 3.5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3.5 mm TRS lowered from 2 Ohms to 0.1 Ohms. - Mic inputs SNR improved from 112.2 dB to 113.7 dB, TRS Line inputs SNR improved from 114 dB to 116.3 dB (120 dBA). THD Line inputs improved by 8 dB. - 6 samples less latency on the AD side by new ADC (5 samples AD, 7 samples DA. It won't get quicker...). All the above improvements were achieved without raising the units power consumption. - K-slot for theft protection. Features : - 24-Bit / 192 kHz - A total of 12 inputs and outputs - All inputs are digitally controlled - 4 Analog inputs for microphones (XLR, SNR 113.7 dB), line and instruments (6.3 mm jack, line SNR 116.3 dB) - Microphone inputs with up to 70 dB of gain, PAD, overload protection and 48 V phantom power - 4 Analog outputs - 2x XLR and 2x outputs for high- and low-impedance headphones (90 mW output power) - Optical input and output - either ADAT (SMUX is supported) or SPDIF - MIDI input and output via breakout cable - USB 2.0 (3.0 compatible) - RME TotalMix FX software including EQ, reverb and delay - Class-compliant - SteadyClock FS for lowest jitter and highest possible jitter immunity - Optimised drivers for PC and Mac - Standalone operation possible - USB bus-powered - Dimensions (W x H x D): 108 x 35 x 181 mm - Weight: 680 g
Four years ago, the Babyface Pro again demonstrated RME s absolute commitment to superior craftsmanship, not only in audio circuits and driver development, but also in mechanics. Created with the highest precision from a block of aluminum, this high-end portable interface incorporated newly designed analog and digital circuits. Its innovative energy saving technologies provided supreme fidelity with no compromises in level, noise or distortion. In the new Babyface Pro FS even more improvements were implemented: - 19 / 4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monitors, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations. - Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity. 3.5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3.5 mm TRS lowered from 2 Ohms to 0.1 Ohms. - Mic inputs SNR improved from 112.2 dB to 113.7 dB, TRS Line inputs SNR improved from 114 dB to 116.3 dB (120 dBA). THD Line inputs improved by 8 dB. - 6 samples less latency on the AD side by new ADC (5 samples AD, 7 samples DA. It won't get quicker...). All the above improvements were achieved without raising the units power consumption. - K-slot for theft protection. Features : - 24-Bit / 192 kHz - A total of 12 inputs and outputs - All inputs are digitally controlled - 4 Analog inputs for microphones (XLR, SNR 113.7 dB), line and instruments (6.3 mm jack, line SNR 116.3 dB) - Microphone inputs with up to 70 dB of gain, PAD, overload protection and 48 V phantom power - 4 Analog outputs - 2x XLR and 2x outputs for high- and low-impedance headphones (90 mW output power) - Optical input and output - either ADAT (SMUX is supported) or SPDIF - MIDI input and output via breakout cable - USB 2.0 (3.0 compatible) - RME TotalMix FX software including EQ, reverb and delay - Class-compliant - SteadyClock FS for lowest jitter and highest possible jitter immunity - Optimised drivers for PC and Mac - Standalone operation possible - USB bus-powered - Dimensions (W x H x D): 108 x 35 x 181 mm - Weight: 680 g
Dans la nouvelle Babyface Pro FS, encore plus d'améliorations ont été apportées:
- Le commutateur 19 / 4 dBu en bas ajoute un moyen direct de réduire le niveau de sortie, améliore ainsi le SNR pour les moniteurs actifs sensibles, évite la distorsion / surcharge et aide à maintenir les faders TotalMix FX près de 0 dB au lieu d'atténuations élevées.
- Circuit Full SteadyClock FS comme dans l'ADI-2 Pro FS pour une gigue la plus faible et une immunité de gigue la plus élevée.
La puissance de sortie des téléphones TRS de 3,5 mm passe de 70 mW à 90 mW. Le THD des deux sorties du téléphone s'est amélioré jusqu'à 10 dB. Utilise maintenant les mêmes amplis opérationnels de sortie que l'ADI-2 Pro. Impédance de sortie de 3,5 mm TRS abaissée de 2 Ohms à 0,1 Ohms.
- Entrées micro SNR améliorées de 112,2 dB à 113,7 dB, entrées ligne TRS SNR améliorées de 114 dB à 116,3 dB (120 dBA). Entrées THD Line améliorées de 8 dB.
- 6 échantillons de latence en moins du côté AD par de nouveaux ADC (5 échantillons AD, 7 échantillons DA. Ça ne sera pas plus rapide ...).
Toutes les améliorations ci-dessus ont été obtenues sans augmenter la consommation d'énergie des unités.
- K-slot pour la protection contre le vol.
Caractéristiques :
- Résolution Max : 24 bits / 192 kHz
- Total de 12 entrées et sorties
- Toutes les entrées sont à commande numérique
- 4 entrées analogiques pour microphones (XLR, ratio S/B : 113,7 dB), niveaux ligne et instruments (jack 6,3 mm, ratio S/B ligne 116,3 dB)
- Entrées microphone avec gain jusqu'à 70 dB, atténuateur, protection contre les surcharges et alimentation fantôme 48 V
- 4 sorties analogiques 2x XLR et 2x sorties pour casque haute et basse impédance (puissance de sortie 90 mW)
- Entrée et sortie optiques - au choix ADAT (SMUX est supporté) ou SPDIF
- Entrée et sortie MIDI par câble épanoui
- Port USB 2.0 (compatible 3.0)
- Logiciel RME TotalMix FX avec égaliseur, réverbération et retard inclus
- Conforme à la classe (Class compliant)
- Horloge SteadyClock FS pour une faible gigue et une immunité maximale aux décalages
- Pilotes optimisés pour PC et Mac
- Fonctionnement autonome possible
- Alimentation par bus USB
- Dimensions (L x H x P) : 108 x 35 x 181 mm
- Poids : 680 g
| Seller information : | Woodbrass |
| Place : | Nantes, France |
| Shipping : | Livraison Mondiale |
SIMILAR ITEMS
