SAXOPHONE SOPRANO OU TéNOR ET CORDES
CE COMPOSITEUR OU MEMBRE N'EXISTE PAS

Sandberg California II TM4 Marley Blue, 4-string electric bass, alder body, maple neck, rosewood (Dalbergia Latifolia) fingerboard, 22 frets, 864mm (34") scale length, 1x Delano J-style pickup, 1x Delano M-style humbucker (white caps), Sandberg 2-band EQ, active/passive, chrome hardware, white pickguard, finish: Marley Blue, incl. Sandberg gig bag

Fodera Emperor Standard 4 Black Limba LTD, bass guitar, 4-string, Thomann limited edition, roasted ash body, black limba top, bolt on 3-piece maple neck, Long Scale, ebony (Diospyros crassiflora) fingerboard, 24 frets, wood block inlays, 2x Fodera Dual Coil pickups, Fodera/Pope 3-Band standard electronics, Gotoh tuners, Fodera non-locking bridge, 19 mm string spacing, gold hardware, colour: natural satin, incl. Fodera case, made in USA.

Bartolini 6-String Classic Bass MK Soapbar, Neck, pickup for electric bass, 6-string version, Upgrade for Ibanez, Cort, Groove Tools, Lakland and other basses with MK-1 shaped pickups, versatile classic bass voicing, neck position, dual coil parallel humbucking, magnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, opposite coil polarity, DC resistance 3.8 kOhm each coil, resonant frequency 4.9 kHz, 84 mm / 3.31" max. sensing width, 4-conductor shielded cable with bare drain wire, passive, black cover, dimensions (L x W x H) 108.2 x 33.5 x 26.2 mm / 4.26" x 1.32" x 1.3" (height incl. cable), screws and springs are not included, Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return.

Bartolini 5-String Classic Bass M4 Soapbar, Bridge, pickup for electric bass, 5-string version, versatile classic bass voicing, hum-cancelling design, bridge position, dual coil parallel humbucking, magnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, opposite coil polarity, DC resistance 5.6 kOhm each coil, resonant frequency 4.5 kHz, 76 mm / 2.99" max. sensing width, 4-conductor shielded cable with bare drain wire, passive, black cover, dimensions (L x W x H) 101.6 x 38.1 x 24.6 mm / 4.0" x 1.5" x 0.97" (height incl. cable), screws and springs are not included, Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return

Set of Pickups for 5-String Electric Bass Full, deep, warm and hum-free sound with clear highs Suitable for American Standard and Deluxe V J-Basses Passive split-coil Dual Inline Hum-killing Magnet configuration: carbon steel, brass, copper, ceramic blade magnets (ferrite) Focused detection area Opposite polarity for bass and treble coils at neck and bridge position DC resistance bridge position: 10.5 kOhm DC resistance neck position: 9.3 kOhm Resonance frequency bridge position: 4.4 kHz Neck position resonance frequency: 5.2 kHz 60 - 81 mm detection width bar position 59 - 78 mm detection width neck position 2-Conductor, shielded coaxial cable Hot coiling wire Dimensions bridge position (L x W x H): 105.2 x 19.6 x 23.9 mm (max. height incl. cable) Dimensions neck position (L x W x H): 101.6 x 19.6 x 23.9 mm (max. height including cable) Colour: Black Delivery without screws and springs Note: Due to the manufacturing process, the plastic housings of the Bartolini pickups may show slight signs of machining or handling. For some pickups, the cable ends are already pre-soldered. These properties do not constitute grounds for complaint or return.

Pickup Set for Electric Bass Big, deep vintage P-Bass sound Passive Split-P Coil Hum-killing Magnet configuration: carbon steel, ceramic blade magnets (ferrite) Wide detection range Opposite polarity of the coils DC resistance: 8.4 kOhm Resonance frequency: 4.6 kHz 40 - 60 mm detection width 2-Conductor, shielded coaxial cable Hot coiling wire Dimensions (L x W x H): 55.9 x 27.4 x 20.3 mm (max. height including cable) Colour: Black Delivery without screws and springs Note: Due to the manufacturing process, the plastic housings of Bartolini pickups may show slight signs of processing or handling. For some pickups, the cable ends are already pre-soldered. These characteristics do not constitute grounds for complaint or return.

Two-channel buffer preamp set for electric bass Clear, transparent sound with extremely low distortion Suitable for piezo/microphone pickups in combination with magnetic pickups Two independent buffer circuits to combine two pickups Circuit identical to AGMPB/918, but with connector for up to 7 plugs of piezo string saddles Piezo channel input impedance: 3.3 MOhm Input impedance magnetic channel: 1 MOhm Output impedance: 3.6 ohm Per channel adjustable gain up to 12 dB Supports 18V operation for 6 dB additional headroom Power supply via 1 x 9V / 2 x 9V (18V) battery (not included) Dimensions (L x W x H): 26.7 x 20.1 x 10.9 mm Includes 25 kOhm blend potentiometer

Preamp Set for Electric Bass Pre-wired 3-band preamp set for electric bass with 5 potentiometers Toggle switch and active/passive switching Clear, transparent sound with extremely low distortion Switchable mid frequency for midrange Configuration: NTMB+F 1 Volume potentiometer with push/pull function 1 Blend potentiometer 1 Mids potentiometer 1 Treble potentiometer 1 Bass potentiometer 1 Mids switch 250/500/800 Hz mid-frequency switching via 3-way switch Active/passive (bypass) switching via push/pull switch on the volume potentiometer Adjustable gain up to 12 dB Pre-wired for 9V operation (including output jack and battery clip) Supports 18V operation for 6 dB additional headroom (second battery clip included) Power supply via 1 x 9V / 2 x 9V (18V) battery (not included) Module dimensions (L x W x H): 44.7 x 25.9 x 13.7 mm

Pickup for 5-String Electric Bass Full, warm and hum-free vintage sound Suitable for American Standard V J-basses Neck position short model Passive split-coil Dual Inline Hum-killing Magnet configuration: carbon steel, ceramic blade magnets (ferrite) Reversed polarity for bass and treble coils at neck and bridge position DC resistance: 7.1 kOhm Resonance frequency: 5.7 kHz 59 - 78 mm capture width 2-Wire, shielded coaxial cable Hot coiling wire Dimensions (L x W x H): 101.6 x 19.6 x 23.9 mm (max. height including cable) Colour: Black Screws and springs not included Note: Due to the manufacturing process, the plastic housings of the Bartolini pickups may show slight signs of machining or handling. For some pickups, the cable ends are already pre-soldered. These characteristics do not constitute reasons for complaint or return.

Set of Pickups for 5-String Electric Bass Full, warm and hum-free vintage sound Bridge position: 59J-L1 (long version) Neck position: 59J-S1 (short version) Passive split-coil Dual Inline Hum-killing Magnet configuration: carbon steel, ceramic blade magnets (ferrite) Reversed polarity for bass and treble coils at neck and bridge position DC resistance bridge position: 7.4 kOhm DC resistance neck position: 6.7 kOhm Resonance frequency bridge position: 4.9 kHz Resonance frequency neck position: 5.7 kHz 60 - 75 mm capture width bridge position 59 - 72 mm capture width neck position 2-Wire, shielded coaxial cable Hot coiling wire Dimensions bridge position (L x W x H): 94.7 x 18.5 x 23.6 mm (max. height including cable) Dimensions neck position (L x W x H): 91.4 x 18.5 x 23.9 mm (max. height including cable) Colour: Black Screws and springs not included Note: Due to the manufacturing process, the plastic housings of Bartolini pickups may show slight signs of processing or handling. For some pickups, the cable ends are also already pre-soldered. These features do not constitute reasons for complaint or return.