| Bastl Instruments : Neo Trinity
(1 commentaires)
6-Channel modulation source- Each channel can be configured as an LFO, envelope generator ...(+) 6-Channel modulation source- Each channel can be configured as an LFO, envelope generator or CV recorder- LFO mode with 8 waveforms, random voltages and switchable polarity (unipolar/bipolar)- Envelope-Modus with 4 selectable forms (Decay Envelope, Variable Shape Envelope, Attack Envelope, Pulse)- CV mode for creating pitch and gate sequences, internal quantiser with 8 scales, switchable polarity (unipolar/bipolar)- Rate button and trigger button can be automated for each channel- All channels can be synchronised to internal and external clock (incl. clock divider/multiplier)- 6 CV/Gate outputs- Clock input/output and reset input- Assignable Meta CV input and CV inputs for channels E & F- Power consumption: 100mA (+12V) / 35mA (-12V)- Width: 8 U- Depth: 24 mm |
|
| Bastl Instruments : Dark Matter
Feedback sound processor- Input amplifier with VCA and adjustable overdrive- Internal enve...(+) Feedback sound processor- Input amplifier with VCA and adjustable overdrive- Internal envelope follower, normalised to the crossfader and feedback CV input- 2-Band equaliser with level control, boost control and CV input per band- Feedback section with level control, CV input with attenuator, polarity switch and external signal input- Crossfader with CV input- Separate outputs for crossfader, envelope follower and feedback- Power consumption: 75mA (+12V) / 75mA (-12V)- Width: 13 U- Depth: 24 mm |
|
| Bastl Instruments : Ikarie
(4 commentaires)
Stereo and dual-peak filter- Cutoff control with continuous crossfade between low-pass and...(+) Stereo and dual-peak filter- Cutoff control with continuous crossfade between low-pass and high-pass characteristics- Resonance control with CV input- Bipolar stereo control with CV input for shifting both filters in the stereo panorama or in relation to the cutoff frequency- Built-in envelope follower with three selectable response times- Level control for input signal- VCA with CV input- CV input for filter frequency with V/oct tracking- Stereo input, stereo output, envelope follower output and differential output of both filters- Power consumption: 100mA (+12V) / 95mA (-12V)- Width: 8 U- Depth: 35 mm |
|
| Bastl Instruments : Waver
(1 commentaires)
Analogue mixer and waveshaper- 3-Channel mixer with two bipolar VCAs (each with CV input)-...(+) Analogue mixer and waveshaper- 3-Channel mixer with two bipolar VCAs (each with CV input)- Shape crossfader with CV input for crossfading mixer output, wave folder and square shaper- Break CV input with attenuator for feedback and clipping sounds- Mix and Shape outputs (pre / post-Waveshaper)- Power consumption: 130mA (+12V) / 85mA (-12V)- Width: 8 U- Depth: 24 mm |
|
| Bastl Instruments : Aikido
(1 commentaires)
Quad VCA and mixer- 4 Identical VCA channels, each with level control (with 6dB gain), mut...(+) Quad VCA and mixer- 4 Identical VCA channels, each with level control (with 6dB gain), mute switch, CV input and signal input / output- Side chain envelope follower (normalised to input A) with three selectable response times- Spectral envelope follower (normalised to output D) with three selectable frequency ranges- Sum output and separate outputs for both envelope followers- Power consumption: 120mA (+12V) / 120mA (-12V)- Width: 11 U- Depth: 24 mm |
|
| Bastl Instruments : Pizza
(2 commentaires)
Digital FM & Waveshape oscillator- Pitch, FM index and shape controls- CV Inputs for FM in...(+) Digital FM & Waveshape oscillator- Pitch, FM index and shape controls- CV Inputs for FM index and shape, each with bipolar attenuator- 3 Internal oscillators- Main oscillator with phase modulation (FM), wavefolder and ring modulation- Octave oscillator with separate output and waveshaper with crossfader between square, sine and sawtooth waveforms- Ratio oscillator for FM with separate waveshaper- FM index adjustable via crossfader between octave and ratio oscillator- Sync input- Pitch input (V/oct.) with automatic calibration and quantisation- Bipolar CTRL control with CV input- Programmable to various parameters- Power consumption: 90mA (+12V) / 20mA (-12V)- Width: 8 U- Depth: 24 mm |
|
| Bastl Instruments : Timber
Dual Overdrive and Wave Folder- Shape and Symmetry controls (each with CV input) common to...(+) Dual Overdrive and Wave Folder- Shape and Symmetry controls (each with CV input) common to both sections- Wave Driver section (overdrive) with two switches for selecting different drive and fold settings- Wave Folder section with 3 selectable operating modes- Crossfader with CV input- Audio input and separate outputs for Wave Driver and Wave Folder- Power consumption: 50mA (+12V) / 50mA (-12V)- Width: 7 U- Depth: 24 mm |
|
| Bastl Instruments : Kompas
Probability Trigger Generator- Generates trigger patterns with 3 tracks that are read from...(+) Probability Trigger Generator- Generates trigger patterns with 3 tracks that are read from a grid of 3x32 steps.- Pattern generation can be influenced by the cartographic parameters latitude, altitude and longitude, each with CV input- Clock and reset inputs- 3 Trigger outputs- Adjustable trigger length (2ms, 5ms, 10ms)- Power consumption: 30mA (+12V) / 0mA (-12V)- Width: 5 U- Depth: 35 mm |
|
| Bastl Instruments : Basil
Bastl Instruments Basil; Eurorack module; Flexible Stereo Space Delay; manual controls for...(+) Bastl Instruments Basil; Eurorack module; Flexible Stereo Space Delay; manual controls for delay time and feedback (each with CV input); buttons for selecting different operation modes like Stereo Spread, Ping Pong, Half Speed, Lo-Fi and Freeze; Space slider with CV input and three selecatble modes (Blur, Filter, Multi-Taps); Wet/Dry control; bi-polar CTRL-knob (with CV input) can be assigned to several parameters; power consumption: 90mA (+12V) / 20mA (-12V); width: 8 HP; depth: 24mm |
|
| Bastl Instruments : 1983
(1 commentaires)
Polyphonic MIDI to CV/Gate interface- 4 Channels with CV and gate output that can be confi...(+) Polyphonic MIDI to CV/Gate interface- 4 Channels with CV and gate output that can be configured as desired (e.g. 4-voice polyphonic, 2x 2-voice polyphonic or 4x monophonic)- CV input per channel enables automatic retuning of the connected oscillators- Quantiser with programmable tone scale per channel- MIDI CC and velocity support- Micro-tuning functionality- CV inputs for transpose, portamento and quantiser control- MIDI clock and reset outputs with internal clock divider- MIDI In (5-pin DIN)- Power consumption: 60mA (+12V) / 20mA (-12V)- Width: 7 U- Depth: 24 mm |
|
| Bastl Instruments : Cinnamon
(2 commentaires)
Analogue multimode filter- Controls for filter frequency and resonance- Character switch f...(+) Analogue multimode filter- Controls for filter frequency and resonance- Character switch for a more aggressive resonance sound- Adjustable input level with drive switch for overdrive- 2 CV inputs for filter frequency- Outputs for low-pass (-12dB/oct.), band-pass (-6dB/oct.) and high-pass (-12dB/oct.)- Power consumption: 30mA (+12V) / 30mA (-12V)- Width: 5 U- Depth: 35 mm |
|
| Bastl Instruments : Buddy
(2 commentaires)
4-Channel preamp stereo mixer- Channels A and B designed for Eurorack signals and up to +6...(+) 4-Channel preamp stereo mixer- Channels A and B designed for Eurorack signals and up to +6dB amplification- Channels C and D designed for external line signals and up to +20dB amplification- Two input sockets per channel (left / right)- Stereo sum output- Several Buddy modules can be cascaded- Power consumption: 27mA (+12V) / 27mA (-12V)- Width: 5 U- Depth: 30 mm |
|
| Bastl Instruments : ABC
6-Channel mixer- Level control per input- Two sum outputs (A+B+C and D+E+F)- Power consump...(+) 6-Channel mixer- Level control per input- Two sum outputs (A+B+C and D+E+F)- Power consumption: 10mA (+12V) / 10mA (-12V)- Width: 5 U- Depth: 35 mm |
|
| Bastl Instruments : Crust
Bastl Instruments Crust; Eurorack module; complex drum synthesizer; two layers mixable via...(+) Bastl Instruments Crust; Eurorack module; complex drum synthesizer; two layers mixable via crossfader and CV input; Tone layer with dual oscillator and 4 modes (FM, FM2, dual, ring modulation); pitch envelope with adjustable attack and decay times; Noise layer with 4 modes (white noise, clap, bit, metal) and lowpass/highpass filter; octave, pitch, detune and envelope-sweep adjustable for the dual oscillator; Timbre section with filter, clipper or shaper; bi-polar CTRL-knob (with CV input) can be assigned to several parameters; trigger and velocity inputs; pitch CV input for Tone layer; envelope CV input and envelope output; drum audio output; power consumption: 90mA (+12V) / 20mA (-12V); width: 8 HP; depth: 24mm |
|
SYNTHETISEUR
