8x combo jack Microphone/Line/Instrument input on the front panel- Separate Sub-D25 line and mic inputs on the rear panel- 8x Line-out sub-D25- Remote-control software for easy access to all parameters and recall functionality- Per channel: 48V phantom power, 25 dB pad, switchable input impedance (300/1300 Ohm), 80 Hz low cut- Phase inversion- Separate stereo monitor path with independent level control- Built-in expansion board with 8 channels A/D conversion for each preamp output and two channels D/A conversion for the digital monitor return signal- Word clock out- Digital headroom selector switch for switching the DMON input and- Digital preamp outputs 1 to 8 from +18dBu, +24dBu or +26dBu- Can be used as an audio interface via the USB-B connection- ADAT sync switch (master/slave)- Dimensions: 19" / 2U

Neve 1073OPX with Dante/USB card; 8-channel microphone preamplifier; 8x combo jack microphone/line/instrument inputs on the front panel; separate Sub-D25 line and mic inputs on the rear panel; 8x line-out Sub-D25; remote-control software for easy access to all parameters and recall functionality; per channel 48V phantom power, 25 dB pad, switchable input impedance (300/1300 Ohms), 80 Hz low cut; Phase flip; separate stereo monitor path with independent level control; installed expansion card with 8 channels A/D conversion for each preamp output and two channels D/A conversion for digital monitor return signal; word clock in/out; digital headroom selector switch to switch the DMON input and digital preamp outputs 1 to 8 from +18dBu, +24dBu or +26dBu; can be used as a primary/core audio interface via the USB-B connector; the primary and secondary Dante connectors allow the 1073 OPX to be connected to any Dante Audio Over IP network as a Dante-capable preamplifier; dimensions: 19"/2 U