| Behringer : ADA8200 Ultragain (692 comments)
Successor to the Behringer ADA8000 Ultragain- 8-Channel AD/DA transformer 24-Bit at 44.1/4...(+) Successor to the Behringer ADA8000 Ultragain- 8-Channel AD/DA transformer 24-Bit at 44.1/48 kHz- 8 Integrated microphone amplifiers (designed by MIDAS)- Sample rate sync- All Mic/Line inputs routable to ADAT outputs, all ADAT inputs routable to Line outputs- 48V Phantom power at each input- Integrated "Planet Earth" mains adaptor- Rack format: 19" / 1 RU- 8 x XLR Mic in- 8 x 6.3 mm jack line in, balanced- 8 x XLR line out, balanced- ADAT in/out- Word clock |
|
| Behringer : FX2000 3D FX Processor (367 comments)
71 New algorithms, including real studio-quality stereo and 3D effects- Modulation- Dynami...(+) 71 New algorithms, including real studio-quality stereo and 3D effects- Modulation- Dynamic, psychoacoustic and EQ algorithms- Authentic amplifier emulation, distortion and special effects- 11 Effect combinations with selectable serial or parallel configuration- Up to 7 adjustable parameters and a 2-band EQ per effect- 24-bit A/D and D/A converters with 64x and 128x oversampling, respectively- 100 Presets and 100 user memories- Comprehensive MIDI implementation- Connectors: Balanced XLR and 6.3 mm jacks- Weight: 2 kg (shipping weight: 3 kg)- Dimensions (HxWxD): 44 x 482.6 x 204.4 mm |
|
| Behringer : SX3040 V2
Gives the overall sound more transparency, space and depth- Separate knobs per channel for...(+) Gives the overall sound more transparency, space and depth- Separate knobs per channel for Tune, Harmonics and Mix on the Exciter section- Separate knobs per channel for Drive, Tune and Mix on the Bass Processor section- Servo-balanced inputs and outputs with 6.3 mm jack and gold-plated XLR sockets- Power supply: 100 - 240 V AC / 50 - 60 Hz- Dimensions: 19", 1U, 150 mm case depth- Weight: 1.5 kg |
|
| Behringer : FBQ2496 Feedback Destroyer (160 comments)
Fully parametric filters- 2 Channel- Up to 20 feedback frequencies per channel- Ultra-fast...(+) Fully parametric filters- 2 Channel- Up to 20 feedback frequencies per channel- Ultra-fast feedback detection (> 0.2 sec)- Auto / manual operation either- 24-bit / 96 kHz A / D and D / A converter- 32-bit DSP- MIDI interface- Up-date-able- Sym. (!) in / out jack- Power supply 100 V-240V- 19 "rack format with 1U |
|
| Behringer : FBQ1502HD Ultragraph Pro (211 comments)
With FBQ Feedback Detection System audio anayser- Servo-balanced inputs and outputs with j...(+) With FBQ Feedback Detection System audio anayser- Servo-balanced inputs and outputs with jack and XLR- Additional Sub-Out (XLR) with adjustable low-pass 30-200 Hz- Switchable Low-Cut- 4-Digit LED display and input level control- Illuminated faders- Design: 19" / 1U |
|
| Behringer : FBQ6200HD (111 comments)
Works as a feedback detector or as an audio analyser- Limiter- Pink noise generator- 2x XL...(+) Works as a feedback detector or as an audio analyser- Limiter- Pink noise generator- 2x XLR or 6.3mm jack input- 2x XLR or 6.3mm jack output- 1x XLR Mono sub output with X-Over frequency controller- Height: 3 U- Dimensions (H x W x D): 133 x 483 x 138 mm- Weight: 2.3 kg |
|
| Behringer : FBQ3102HD Ultragraph Pro (78 comments)
Audio Analyzer- Low-noise operational amplifiers- Servo-balanced inputs and outputs with j...(+) Audio Analyzer- Low-noise operational amplifiers- Servo-balanced inputs and outputs with jack and XLR- Additional Sub-Out (XLR) with adjustable low-pass 30-200 Hz- Adjustable Low- and Hi-Cut- 12-Digit LED display for in - and output signal- Input level control- Hard bypass switch- Illuminated faders- Design: 19" / 2U |
|
| Behringer : PX3000 Ultrapatch Pro
Balanced jack sockets 6.3 mm- Three switchable modes per channel: Normal (normalised), Hal...(+) Balanced jack sockets 6.3 mm- Three switchable modes per channel: Normal (normalised), Half Normal (half normalised) and THRU (through-connected)- Switch on the top of the patch bay for each channel for switching the modes- Body shape: 19" / 1 RU- Dimensions (W x H x D): 483 x 45 x 93 mm- Weight: 1.8 kg |
|
| Behringer : DI20 (947 comments)
Jack input- XLR Out- -20 / 40dB PAD (up to 3000 W)- Operable via battery (9V) or phantom (...(+) Jack input- XLR Out- -20 / 40dB PAD (up to 3000 W)- Operable via battery (9V) or phantom (15-52V)- With the ground switch ground loop can be eliminated- Battery-off switchable- Additional Split mode (channel 1 assigns signal to both XLR outputs)- In link mode Channel 2 outputs the signal from channel 1 balanced- Robust housing |
|
| Behringer : DI800 Ultra-DI Pro v2 (85 comments)
Servo balanced circuit for absolutely linear frequency response- Connection to amplifier o...(+) Servo balanced circuit for absolutely linear frequency response- Connection to amplifier outputs up to 3000 W possible- Ground lift- Switchable input attenuation- Installation size: 19", 1 U |
|
| Behringer : SU9920
More clarity, dimension and depth for dramatic sound enhancement- Natural treble by enrich...(+) More clarity, dimension and depth for dramatic sound enhancement- Natural treble by enriching overtones and more precise, punchy bass by phase compensation- Improvement of speech intelligibility and higher music presence- Separate "Low Contour" and "Process" controls per channel for ultimate sound enhancement- Precise, 5-stage LED level display for optimum performance- Servo-balanced inputs and outputs with 6.3 mm jack and gold-plated XLR connectors |
|
| Behringer : MDX2600 V2 (65 comments)
Compressor, expander, limiter- 2-Channel- Expander / gate controllable: Threshold, release...(+) Compressor, expander, limiter- 2-Channel- Expander / gate controllable: Threshold, release, ratio- Tube simulator- De-eater: male / female voice- Side chain- Automatic mode for compressor and limiter: Attack / release- Stereo link- Gain Reduction and in / out-level metering via LED chains- Peak Limiter adjustable (threshold)- -10 dBV / +4 dBu switchable- Balanced XLR and jack inputs and outputs- Format: 19" / 1 HE- Case depth: 149 mm- Weight: 1.7 kg |
|
| Behringer : DI100 Ultra-DI
XLR/ jack input- Jack link output- XLR output- With galvanic isolation- -20/ 40dB Pad (up ...(+) XLR/ jack input- Jack link output- XLR output- With galvanic isolation- -20/ 40dB Pad (up to 3000 W)- Operatable via battery (9V) or phantom (15-52 V)- GND lift- Battery off switch- Rugged floor box with isolating feet |
|
| Behringer : HD400
Simple, fast and reliable removal of mains hum and noise.- Safe and effective interruption...(+) Simple, fast and reliable removal of mains hum and noise.- Safe and effective interruption of humming loops- Automatic conversion of unbalanced into balanced signals- Inputs: 2 Stereo jack sockets 6.3 mm- Outputs: 2 Jack sockets 6.3 mm (2x mono or 1x stereo)- Dimensions: 32 x 57.2 x 103.6 mm- Weight: 180 g |
|
| Behringer : MDX4600 Multicom Pro-XL V2 (51 comments)
4-Channel expander / gate / compressor / peak limiter of the reference class with dynamic ...(+) 4-Channel expander / gate / compressor / peak limiter of the reference class with dynamic enhancer and low-contour filter- Servo-balanced inputs and outputs with 1/4" phone jacks and XLR connectors- Dimensions (H x W x D): 44.5 x 482.6 x 217.0 mm- Installation size: 19", 1U- Weight: 2.25 kg |
|
| Behringer : DI4800A (18 comments)
Suitable for stage and studio- 4 Inputs: XLR / 6.3 mm TRS jack- Switchable ground lift- Sw...(+) Suitable for stage and studio- 4 Inputs: XLR / 6.3 mm TRS jack- Switchable ground lift- Switchable boost per channel: 6/12/18 dB- 8 Outputs: XLR- Switchable -20 dB output attenuation- Dimensions (W x H x D): 483 x 71 x 44 mm- Weight: 1.4 kg |
|
| Behringer : DI4000 V2 (18 comments)
Level shifter- Gain switch +20 dB for pre-amplification of low-level signals- Switchable p...(+) Level shifter- Gain switch +20 dB for pre-amplification of low-level signals- Switchable phase- Switchable high-cut filter (8 kHz) for guitars- Ground lift switch- 4 x XLR and jack inputs- 4 x Jack link outputs- 4 x XLR outputs- Impedance: 240 ohms- Max.output level: + 20dBu- Frequency response: 23 - 69,000 Hz- Installation depth: 136 mm- Design: 19" / 1 U- Weight: 2.1 kg |
|
| Behringer : Ultra-DI DI400P (153 comments)
Direct connection of instruments to amplifiers and mixers- Allows long cable paths without...(+) Direct connection of instruments to amplifiers and mixers- Allows long cable paths without loss of sound in the high frequency range- Jack input- Parallel output- Balanced XLR output ground lift switch solves typical problems with ground loops- Road-suitable metal housing |
|
| Behringer : GI100 ULTRA-G (342 comments)
With a speaker emulation developed by Juergen Rath 4x 12"- Jack input- Direct link out- XL...(+) With a speaker emulation developed by Juergen Rath 4x 12"- Jack input- Direct link out- XLR out- Galvanic isolation- -20/ 40dB PAD (up to 3000 W)- Operatable via battery (9V) or phantom power (15 - 52 V)- Gnd lift- Battery off switch- Rugged floor box with isolating feet |
|
| Behringer : Ultra-DI DI600P (84 comments)
Jack input- Parallel output- Output impedance balanced- Impedance and signal matching for ...(+) Jack input- Parallel output- Output impedance balanced- Impedance and signal matching for the direct connection of instruments to amplifiers and mixers- Filter switch reduces annoying hiss and buzz- Ground lift switch eliminates typical ground loop problems- Instruments or amplifier outputs with up to 3,000 watts can be connected directly- It converts any unbalanced signal to a balanced signal and eliminates unwanted noise- Compact, road-suitable metal casing |
|