| DBX : DJDI (27 comments)
Passive 2-Channel DI-Box- Converts 2 unbalanced signals (2-pin - 6.3 mm jack) into balance...(+) Passive 2-Channel DI-Box- Converts 2 unbalanced signals (2-pin - 6.3 mm jack) into balanced (3-pin - XLR) - With ground-lift function - Adjustable volume of the input signal - Input impedance: 50 kΩ - Output impedance: 600 Ohm - Sturdy metal body - Dimensions 12 x 14 x 4 cm - Colour: Black |
|
| DBX : ZC-2
Remote Control- DBX DriveRack 260, 220i and ZonePro - Volume control and mute switch - Con...(+) Remote Control- DBX DriveRack 260, 220i and ZonePro - Volume control and mute switch - Connection via Cat 5 cable |
|
| DBX : DI4 (9 comments)
Multichannel DI Box with Line Mixer- Frequency range: 20 - 20,000 Hz - Reduction of input ...(+) Multichannel DI Box with Line Mixer- Frequency range: 20 - 20,000 Hz - Reduction of input signal -20 dB and -40 dB / channel - Earthing switch - Panorama slider and volume slider / channel - Headphone output (RCA) - Robust metal housing - Dimensions: 44.5 x 230.6 x 217 mm - Weight: 1.75 kg |
|
| 266XS
- Erreur de fonctionnement preuve pour lisser les niveaux inégaux, ajouter du main...(+) - Erreur de fonctionnement preuve pour lisser les niveaux inégaux, ajouter du maintien aux guitares, tambours ou engraissent resserrer les mélanges - Les nouveaux algorithmes de synchronisation de porte assurent les caractéristiques de libération lisses - Expander programme adaptatif / portes - le contrôle de la dynamique de grande résonance pour tout type de matériau de programme - précision séparée conduit affiche pour la réduction de gain, seuil de compression et le seuil de la porte permettent une installation rapide, précise |
|
| dbx : 131s (26 comments)
Graphic Equalizer- 1x 31-Band - ± 6/12 dB Input gain - Output level display - Switc...(+) Graphic Equalizer- 1x 31-Band - ± 6/12 dB Input gain - Output level display - Switchable bypass - Clip LED - 50 Hz low-cut filter 12 dB / octave - 20 mm faders - Dynamic range >108 dB - Control range switchable ± 6 dB or ± 12 dB - Bal. jack/XLR in/out - Internal power adapter - Format: 19" 1U |
|
| Dbx 131s Graphic Equalizer 1 X 31 Strips DBX 131S |
|
| DBX : 231s (173 comments)
Graphic Equalizer- 2x 31 band Constant Q filters - 20 mm faders - ± 12 dB variable ...(+) Graphic Equalizer- 2x 31 band Constant Q filters - 20 mm faders - ± 12 dB variable input gain - 4 LEDs output level meter - Clip LED over modulation indicator - Inputs and outputs: Balanced XLR / jack - 50 Hz Low-cut filter 12 dB/octave - ISO standard (20-20000 Hz) - Dynamic range: >108 dB - Frequency Response: < 10 Hz to > 50 kHz - Control range can be switched to ± 6 or ± 12dB - Bypass capability - Internal power adapter - Format: 19" 2 U - Weight: 2.73 kg |
|
| 166XS
- Erreur de fonctionnement preuve pour lisser les niveaux inégaux, ajouter du main...(+) - Erreur de fonctionnement preuve pour lisser les niveaux inégaux, ajouter du maintien aux guitares, tambours ou engraissent resserrer les mélanges - Les nouveaux algorithmes de synchronisation de porte assurent les caractéristiques de libération lisses - Expander programme adaptatif / portes - le contrôle de la dynamique de grande résonance pour tout type de matériau de programme - précision séparée conduit affiche pour la réduction de gain, seuil de compression et le seuil de la porte permettent une installation rapide, précise |
|
| DBX accessoires home studio pb-48 patchbays
- 48 prises à l'avant et 48 ports à l'arrière -...(+) - 48 prises à l'avant et 48 ports à l'arrière - 24 signal réglable voies - halbnor du Mali ierter ou denormalisierter d'exploitation - Robuste et silencieusement - Trs symétrique et asymétrique TS connecteur jack 6,35 mm |
|
| DBX : 560A
DBX 560A; compressor/limiter module; compatible with 500 series chassis; hardwire bypass; ...(+) DBX 560A; compressor/limiter module; compatible with 500 series chassis; hardwire bypass; True RMS level detection for very musical compression; OverEasy or classic hard knee compression with dbx’s ultra-musical program-dependent attack and release times; compression ratio variable from 1:1 through infinity:1 to -1:1; output gain control and bypass button for easy comparison of processed vs. unprocessed signal; precise RMS gain reduction and input/output meter displays; exclusive Infinity+ compression using negative ratios; |
|
| DBX : 1231 (78 comments)
Graphic 2x 31 Band Equalizer- 4 LEDs for output level - 45mm faders (20 Hz - 20 kHz) - Bal...(+) Graphic 2x 31 Band Equalizer- 4 LEDs for output level - 45mm faders (20 Hz - 20 kHz) - Balanced jack and XLR in/out - Switchable ranges +/- 6dB and +/- 15dB - Format: 19" 3U |
|
| DBX : AFS2 (9 comments)
2-Channel Digital Anti-Feedback Processor- Enormously fast suppression of feedback - 2 Ope...(+) 2-Channel Digital Anti-Feedback Processor- Enormously fast suppression of feedback - 2 Operating modes - Fixed mode with storable filters and presets - Live mode for real-time analysis and editing over the complete frequency spectrum - Extremely narrow notch filters (up to 1/80 of an octave) for differentiated intervention - 24 Programmable filters per channel - LED chain for all 24 filters per channel - LCD Display - Easy setup - XLR & Jack input and output per channel - USB Port for firmware updates - Internal power supply - Format: 19 "/ 1 HU |
|
| DBX : DriveRack 260 Bundle the t.bone MM-1 pro snake TPM 10 |
|
| Dbx Drpa2 Driverack Diffusion Processor 2x6
All you need to get the most from your PA. Now with complete control from your mobile devi...(+) All you need to get the most from your PA. Now with complete control from your mobile device. The DriveRack® PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx s proprietary AutoEQ and AFS algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android®, iOS®, Mac®, or Windows® device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation. AutoEQ New, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience. With the RTA Mic listening to your room, the new, updated DriveRack PA2 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise. Enhanced AFS Feedback Elimination Enhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system s tone. Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before it even has a chance, while never altering your sound. Updated Wizard Setup Functions Updated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date. Wizard functions on the DriveRack PA2 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system. Helps you easily configure level balancing, AutoEQ, Advanced Feedback Suppression, and provides access to built-in and constantly updating speaker tunings from most major speaker manufacturers. Available Input Processing dbx Compression AFS (Advanced Feedback Suppression) Graphic EQ 8-Band Parametric EQ (adjusted when using the AutoEQ) Subharmonic Synthesis Available Output Processing Crossover (supports full range, 2-way, and 3-way systems) 8-Band Parametric EQs (used for speaker tunings) dbx Limiting Driver Alignment Delays All New Setup Wizard Streamlined AutoEQ All New AFS (Advanced Feedback Suppression) Mobile Control (Android®, iOS®, Mac®, Windows®) dbx Compression Graphic EQ 8-Band Parametric EQ (adjusted when using the AutoEQ) Input Subharmonic Synthesis Crossover (supports full range, 2-way, and 3-way systems) 8-Band Parametric EQs (used for speaker tunings) Output dbx Limiting Driver Alignment Delays Tested Wireless Routers: Dlink 636L Dlink Cloud router 2000 Cisco / linksys: WRT54G2V1 Netgear WGR614 v7 Netgear WNR 1000 (Other routers are likely compatible. This list represents those which have been tested thus far.) Input (2) line inputs. (1) RTA Mic input Input Connectors (2) Female XLR line inputs. (1) Female XLR RTA Mic input Input Type Electronically balanced/RF filtered Input Impedance >50 kohm A/D Converter dbx Type IV Conversion System CMRR > 45dB Mic Preamp Phantom Power 15VDC (RTA) Mic Preamp Equivalent Input Noise (EIN) 110 dB A-weighted, >107dB unweighted THD Noise 0.003% typical at 4dBu, 1kHz, 0dB input gain Frequency Response 20Hz 20kHz, /- 0.5dB Interchannel Crosstalk < -110 dB, -120dB typical (input-to-output: < -100 dB) Operating Voltage 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz Power Consumption 22 W Unit Weight 5.25 lbs. (2.4 kg) Shipping Weight 6.75 lbs. (3.1 kg) Dimensions 1.75 (H) x 5.75 (D) x 19 (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W) D/A Dynamic Range 112 dB A-weighted, 110dB unweighted 399.00€ - Sold by Woodbrass In Stock (24 hours) Only 2 left in stock !Similar Items |
|
| Dbx Djdi Stereo Passive Direct Box
The 2-channel passive DJdi is designed to be used as a standard tool for many audio applic...(+) The 2-channel passive DJdi is designed to be used as a standard tool for many audio applications. Offering two channels, the DJdi easily solves the problem of converting unbalanced signals into balanced output suitable for use with mixers, PAs, recording consoles and more. The continuously variable input signal attenuator can accommodate a wide range of signal levels and its passive design means clean, quiet and uncolored operation with no power required. Features - Dual Channel - (2) 1/4 50k Ohm TS Inputs - (2) XLR Transformer-Isolated 600 Ohm Input/Outputs - Passive Circuit Design - Continuously Variable Input Attenuator - Ground Lift Switch 34.00€ - Sold by Woodbrass In Stock Supplier (3-10 days)Similar Items |
|
| Dbx Di1 Active Direct Box Di New Product
The dbx Di1 is a compact high-quality active direct injection box. Ideal for both studios ...(+) The dbx Di1 is a compact high-quality active direct injection box. Ideal for both studios and on the road, the Di1 will ensure audio signals reach their intended destination in both a balanced format and free from unwanted noise. Connect the output from electric guitars, bass amplifiers, keyboards, etc., directly to a console mixer without the use of a microphone. Built for toughness and reliability, the Di1 has all the features of a fully featured gig-ready workhorse DI unit. Compatible with HARMAN CONNECTED PA dbx Di1 is the ideal direct box for musicians who want to spend less time setting up and more time focusing on their music. Unlike ordinary direct boxes, the Di1 has embedded HARMAN ioSYS technology which enables it to automatically recognize and configure with the HARMAN Connected PA app and system of products, to take the guesswork out of setting up and getting consistently great sound. Current products that support HARMAN Connected PA include the Soundcraft Ui24R mixer, JBL PRX800W loudspeakers, AKG P5i microphones, and dbx Di1 direct boxes. Learn more about HARMAN Connected PA. Specifications - Level and impedance matching function - Output impedance: > 600 Ohms - Signal pass through connector - Output connector: XLR balanced - Battery LED indicator - Distortion: (THD) 250k Ohm - Metal Chassis 51.00€ - Sold by Woodbrass In Stock Supplier (3-10 days)Similar Items |
|
| Dbx Di12 12 Active Di Box
At dbx, when we do something, we do it right. So when we decided to create our new direct ...(+) At dbx, when we do something, we do it right. So when we decided to create our new direct injection boxes, we didn’t settle for the same old tired approach to direct box design. With our dbx name on the line, how could we One look at our new dB10 Passive and dB12 Active direct boxes will tell you that these are clearly different. With their bullet-proof construction, and extraordinary audio performance to rival their looks, finally there’s a direct box worthy of the dbx name.Utilizing custom dbx mu-metal-shielded audio transformers, high-quality Neutrik® connectors, and low-noise circuitry preserves the sonic integrity and true characteristics of the signal source. Both boxes include a pad switch that accomodates instrument, line and even speaker level signals. Take even more control of your sound by utilizing the polarity invert switch to set the phase relationship between the direct and mic'd sound.As a professional, you don’t have time for interference, so we’ve included a ground lift switch to solve potential hum and buzz problems due to ground loops. And between the combined shielding of the cast metal chassis and the custom-wound transformer, you can be doubly assured of a clean signal free from interference. All of this sits atop a solid, stable footprint, that will keep the box from being dragged around the stage, and the unique contoured underside allows secure stacking of multiple units.So whether you need to control the level, placement in the mix, or overall characteristics of 4 independent signals or control the gain leveling on a couple of stereo pairs, the dbx dB12 is for you.Features * Premium Performance * Rugged Design * Stackable Chassis with Durable Rubber Foot * Gold-plated Neutrik® XLR Connector * Premium Chrome Toggle Switches * Hi-Z 1/4 Input Jack * Parallel 1/4 Thru Jack * Transformer Isolated * Premium Shielded Custom dbx Transformer * Balanced XLR Lo-Z Output * 3-Way 0/20/40 dB Pad Switch * Flat/High-Cut Filter Switch * Output Polarity Invert Switch * Ground Lift Switch * 4 Year Warranty!Additional dB12 Features * Phantom Powered * Green LED Phantom Power Indicator * +48V Phantom Operation * Low-Noise Active Circuit 99.00€ - Sold by Woodbrass In Stock Supplier (3-10 days)Similar Items |
|
| Dbx 215s Graphic Equalizer 2 X 15 Strips DBX 215S 127.00€ - Sold by Woodbrass In Stock Supplier (3-10 days)Similar Items |
|
| Dbx 231s Graphic Equalizer 2 X 31 Strips DBX 231S 149.00€ - Sold by Woodbrass In Stock Supplier (3-10 days)Similar Items |
|
| Dbx Pb-48 Patch Jack Balanced 48 Points Pb48
Well, it's not very glamourous, but everybody needs a patchbay. And as for the PB-48, it i...(+) Well, it's not very glamourous, but everybody needs a patchbay. And as for the PB-48, it is a patchbay that just works, all the time, every time. It comes in two flavors: half-normalled or de-normalled, with 48 1/4 points on the front panel, connected to 48 1/4 points on the rear. The PB-48 is a rugged, noise-free, versatile patchbay designed to serve all your patchbay needs, from providing clear and easy access to your mixer and other studio gear, to reducing the wear and tear on their jacks, to facilitating quick and precise rerouting of devices within your studio setup. See, not glamorous, but it works great.SPECIFICATIONSPatch Points: 48 (2 rows of 24)Jacks: 1/4” phone, balanced or unbalanced, nickel-silver, self-cleaning contactsNormalling: Half-normalled or de-normalled (user configurable)Chassis Dimensions (H x W x D): 1.75” x 19” x 2.6” (44mm x 482mm x 68mm)Module Dimensions (H x W x D): 1.4” x 0.6” x 2.6” (40mm x 18mm x 68mm)Shipping Weight: 2.3 lb (1.1 kg) 156.00€ - Sold by Woodbrass In Stock Supplier (3-10 days)Similar Items |
|