| EarthQuaker Devices : Devices Plumes Signal Shredder (68 comments)
- Low to Medium Gain Overdrive- Innovative development of the legendary green overdrive pe...(+) - Low to Medium Gain Overdrive- Innovative development of the legendary green overdrive pedal with more headroom, less background noise and significantly better signal integrity- Improved working range of the tone controller- Harmonises with electric guitars, basses and synthesizers- Noiseless relay-based soft-touch circuit- Works as a latching and momentary switch- True bypass- Level, tone and gain controls- 3-Way toggle switch for the three clipping modes (Symmetrical LED / asymmetrical silicon / No Diode OpAmp Drive)- Bypass footswitch- Status LED- Metal housing- 6.3 mm Mono jack input / output- Power supply via optional 9 V DC power supply (not included in delivery) 2.1 x 5.5 mm coaxial connector, polarity (-) inside- Current consumption: 25 mA- Dimensions (L x W x H): 117 x 64 x 57 mm- Weight: 396 g |
|
| EarthQuaker Devices : Afterneath Reverberator (4 comments)
- Reverb Eurorack module- Atmospheric, spreading and magical reverb sounds- 9 Selectable m...(+) - Reverb Eurorack module- Atmospheric, spreading and magical reverb sounds- 9 Selectable modes change the function of the drag controller (Unquantized / Unquantized with Slew / Unquantized Volt / Octave / Chromatic Scale / Minor Scale / Major Scale (Lydian) / Pentatonic Scale / Octaves & Fifths / Octaves)- Controls for input, dampening, reflect, mix, drag, mode, diffuse, length- 4 CV Attenuverter (Drag, Mode, Diffuse, Length)- Status LED- Skiff-compatible - protrudes less than 31.75 mm (1.25") behind the panel when the power connector is installed- Depending on the setting of the input control, Audio Input can process input signals from instrument level up to modular level- 4 x 3.5 mm mono jack CV input (drag, mode, diffuse, length)- Input and output: 3.5 mm mono jack- Reflect Send and Reflect Return: 3.5 mm mono jack- Power supply via regular Eurorack power connector (10-pin) with a mark to identify the negative contacts- Current consumption: 95 mA from the +12 V rail, 0 mA from the 12 V and + 5V rails- Width: 16 HP- Maximum depth 31.75 mm |
|
| EarthQuaker Devices : Afterneath V3 (12 comments)
- Reverb- Atmospheric, spreading magical reverb sounds- 9 Selectable modes change the func...(+) - Reverb- Atmospheric, spreading magical reverb sounds- 9 Selectable modes change the function of the drag controller (Unquantized, Unquantized with Slew, Unquantized, Volt / Octave, Chromatic Scale, Minor Scale, Major Scale (Lydian), Pentatonic Scale, Octaves & Fifths, Octaves)- Tails / No Tails switchable- With activated tails, the wet signal fades slowly and naturally after the effect is switched off- Noiseless relay-based soft-touch circuit functions as a latching and momentary switch (Flexi-Switch Technology)- True bypass- Controls for Length, Diffuse, Dampen, Reflect, Drag and Mix- Bypass footswitch- Status LED- Metal housing- 6.3 mm Mono jack input / output- 6.3 mm Expression pedal input- Power supply via optional 9 V DC power supply, 2.1 x 5.5 mm barrel connector, polarity (-) inside- Current consumption 100 mA- Dimensions (L x W x H): 121 x 64 x 57 mm- Weight: 400 g |
|
| EarthQuaker Devices : Astral Destiny (3 comments)
- Oktave reverb- 8 Selectable reverb modes: Abyss, Shimmer, Sub, Sub Shimmer, Astral, Asce...(+) - Oktave reverb- 8 Selectable reverb modes: Abyss, Shimmer, Sub, Sub Shimmer, Astral, Ascend, Descend, Cosmos- 8 Freely editable presets- Freely assignable expression- or CV control for all control options- Variable modulation- Innovative Stretch function doubles the length of the reverb effect and adds an adjustable pitch bending effect- Buffered bypass with switchable Tails Mode- Analog dry signal path- Artwork by well-known Marvel Comics artist Matt Horak- Controls for: Length, Depth, Rate, Tone, Mix- 8-Way rotary switch for selecting presets- 8-Way rotary switch for selecting reverb modes- Bypass footswitch- Stretch footswitch- Status LEDs- Input: 6.3 mm jack- Output: 6.3 mm jack- 6.3 mm Expression pedal input- Powered via 9 V DC power supply unit (2.1 mm x 5.5 mm, coaxial power connector, negative polarity (-) inside (not included))- Power consumption: 85 mA- Metal housing- Dimensions (L x W x H): 118 x 92 x 57 mm- Weight: 450 g |
|
| EarthQuaker Devices : Avalanche Run V2 (24 comments)
- Stereo reverb / delay- Up to 2 seconds delay time- Selectable true / trails bypass- Foot...(+) - Stereo reverb / delay- Up to 2 seconds delay time- Selectable true / trails bypass- Footswitch works as a latching and momentary switch- Tap tempo function- Digital way of working- Offers a variety of tape and analog delay sounds- Controls for time, repeats, tone, mix (delay) and mix (reverb)- 6-Way EXP rotary switch for selecting the expression parameter- 6-Way ratio rotary switch for selecting the tap-tempo subdivision- Toggle switch to select the delay / reverb mode (reverse / normal / swell)- Activate footswitch- Noiseless relay-based soft-touch circuit- Tap footswitch- Status LEDs- Metal housing- 2x 6.3 mm mono latches (L / R) inputs / outputs- 6.3 mm TRS expression input- Power supply via 9 V DC power supply (2.1 mm x 5.5 mm hollow plug, polarity (-) inside)- Dimensions (L x W x H): 140 x 120 x 57 mm- Power consumption: 425 mA- Includes power supply- Handmade in USA |
|
| EarthQuaker Devices : Pyramids Stereo Flanging (6 comments)
- Flanger- True stereo operation possible- Digital operation- Fully analogue dry and full ...(+) - Flanger- True stereo operation possible- Digital operation- Fully analogue dry and full digital wet signal path- 5 User presets- 8 Flanger Modes: Classic - Through Zero - Barber - Pole Up - Barber Pole Down - Trigger Up - Trigger Down - Step - Random- Supports side chain flanging- Positive and negative feedback- Flexi-Switch footswitch works as a latching and momentary switch- Tap Tempo function with Tap Tempo subdivisions- Selectable True / Trails Bypass- Mix, Width, Rate Manual, Feedback and Modify knobs- 8-Way mode rotary switch- 6-Way presets rotary switch- Rate & Tap Toggle Switch to set Tap Tempo subdivisions (Slow / Normal / Fast)- Activate footswitch- Tap footswitch- Noiseless relay-based soft-touch circuit- Status LEDs- metal housing- 2 x 6.3 mm Mono jacks (L / R) inputs / outputs- 6.3 mm TRS expression input to control Manual in all modes- Power supply via 9 V power supply with 2.1 mm x 5.5 mm coaxial connection, polarity (-) inside- Dimensions (L x W x H): 140 mm x 120 mm x 57 mm- Power consumption: 425 mA- Includes power supply- Handmade in USA |
|
| EarthQuaker Devices : Dispatch Master V3 (24 comments)
- Delay / Reverb- Up to 1.5 seconds delay time- Reverb and delay can be used together or s...(+) - Delay / Reverb- Up to 1.5 seconds delay time- Reverb and delay can be used together or separately- Flexi-Switch footswitch works as latching and momentary switch- True Bypass- Controls for Time, Repeats, Reverb, Mix- Bypass foot-switch- Noiseless relay-based soft-touch circuitry- Status LED- Metal casing- 6.3 mm Mono jack input / output- Power supply via optional 9 V power supply unit (2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included)- Current consumption: 78 mA- Dimensions (L x W x H): 128 x 66 x 57 mm- Handmade in USA |
|
| EarthQuaker Devices : Grand Orbiter V3 (4 comments)
- 4-Stage phaser- Switchable from phaser to vibrato- LFO kill switch enables fixed-resonan...(+) - 4-Stage phaser- Switchable from phaser to vibrato- LFO kill switch enables fixed-resonant filter effects- 3 Modulation areas- Footswitch works as a latching and momentary switch- Complete analogue build- True bypass- 4 Controls for Resonance, Rate, Depth and Sweep- 2 Mini-toggles for Rate and Phase/Vibrato- Input and output 6.3 mm mono-jack- Noise free relay-based soft touch switching- Bypass footswitch- Status LED- Metal housing- Input and output 6.3 mm mono-jack- Power supply via 9 V DC power supply unit (2.1 mm x 5.5 mm barrel plug, polarity (-) inside, not included), battery operation is not supported- Dimensions (L x W x H): 117 x 64 x 57 mm- Power consumption: 10 mA- Handmade in USA |
|
| EarthQuaker Devices : Sea Machine V3 (13 comments)
- Chorus- Analog / digital hybrid circuit- Harmonizes perfectly with distortion pedals- An...(+) - Chorus- Analog / digital hybrid circuit- Harmonizes perfectly with distortion pedals- An additional LED indicates the LFO speed, also in the bypass- Controls for Shape, Rate, Depth, Intensity, Dimension and Animate- True Bypass- Bypass footswitch- Noise-free soft-touch switching- Status LED- Metal housing- 6.3 mm mono jack input and output- Power supply via 9 V DC power supply (2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included), battery operation is not supported- Dimensions (L x W x H): 117 x 64 x 57 mm- Power consumption: 50 mA- Handmade in USA |
|
| EarthQuaker Devices : Ghost Echo V3 Reverb (9 comments)
- Digital reverb- Emulates a vintage Amp-Style spring reverb- 30-150 ms Pre-Delay- Control...(+) - Digital reverb- Emulates a vintage Amp-Style spring reverb- 30-150 ms Pre-Delay- Controls for Depth, Dwell, Attack- Analog Dry Path- True bypass- Bypass foot switch- Noise free relay-based soft touch switching- Status LED- Metal housing- Input and output 6.3 mm mono-jack- Power supply via 9 V DC power supply (2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included), battery operation is not supported- Power consumption: 80 mA- Dimensions (L x W x H): 117 x 64 x 57 mm- Hand made in USA |
|
| EarthQuaker Devices : Disaster Transport SR (2 comments)
- Dual delay with reverb and modulation- Offers a variety of sounds in the Lo-Fi tape dela...(+) - Dual delay with reverb and modulation- Offers a variety of sounds in the Lo-Fi tape delay style- Delay A: Up to 600 ms with adjustable modulation- Delay B: Up to 300 ms with adjustable reverb- Both delay lines can be used separately, in parallel, in series, or in series / parallel- 10 Controls for Time A, Repeats A, Mix A, Depth, Rate, Bleed, Reverb, Mix B, Repeats B and Time B- 3 Footswitches for Delay A, Bypass, Delay B- 6.3 mm Mono jack input and output, as well as 2 expression pedal connections for repeats and bleed- Choice of True Bypass / Buffered Bypass with trails- Status LED- Metal housing- Powered with a 9 V DC power supply (not included, available under Article Nr 409939)- Power consumption: 100 mA- Handmade in the USA |
|
| EarthQuaker Devices : Levitation Reverb V2 (10 comments)
- Vintage Spring and Plate Reverb- Operates digitally- True Bypass- Controls: Decay, Atmos...(+) - Vintage Spring and Plate Reverb- Operates digitally- True Bypass- Controls: Decay, Atmosphere, Mix, Tone- Toggle switch for selecting between long and short reverb lengths- Bypass footswitch- Status LED- Metal housing- 6.3 mm Mono jack in-/output mounted on the front- Powered via 9 V DC power supply (2.1 mm x 5.5 mm barrel connector, negative polarity inside, not included)- Battery operation is not possible- Dimensions (L x W x H): 117 x 64 x 57 mm- Power consumption: 50 mA- Handmade in the USA |
|
| EarthQuaker Devices : Hoof V2 (11 comments)
- Germanium / Silicon Hybrid Fuzz- Germanium / silicon transistor hybrid circuit- From dir...(+) - Germanium / Silicon Hybrid Fuzz- Germanium / silicon transistor hybrid circuit- From dirty amp-style overdrive to monstrous fuzz- Analogue operation- True bypass- Controls for Tone Shift Level and Fuzz- Bypass footswitch- Status LED- Metal housing- Front-side 6.3 mm mono-jack inputs / outputs- Power supply with 9 V battery or via 9 V DC power supply (2.1 mm x 5.5 mm power connection, polarity (-) inside, not included)- Dimensions (L x W x H): 117 x 64 x 57 mm- Power consumption: 3 mA- Hand-made in USA |
|
| EarthQuaker Devices : Data Corrupter
- Modulated monophonic PLL harmoniser- Offers wild but repeatable guitar synthesiser/squar...(+) - Modulated monophonic PLL harmoniser- Offers wild but repeatable guitar synthesiser/square wave fuzz sounds- 3 Completely blendable voices (Master Oscillator, Subharmonic, Square)- Provides harmonics of up to three octaves above/below the input signal- 2 Frequency modulation modes (Glide mode - gentle portamento pitch bends and Vibrato mode - retro sci-fi laser effects)- Frequency modulation of Master Oscillator as well as the subharmonic voices- Fully analogue signal path- True bypass- Voice Mixer Section controls for Square, Subharmonic, Oscillator and Level- 8-Way Master Oscillator rotary switch for selecting the Master Oscillator program- Master Oscillator Root toggle switch to select between -1 and -2 Unison Settings- Frequency modulator section regulator for rate- Glide/Vibrato toggle switch for selecting the frequency modulation mode- 8-Way subharmonic rotary switch for selecting the subharmonic program- Subharmonic Root toggle switch for selecting between Unison and Oscillator modes- Bypass footswitch- Noise-free relay-based circuit- True bypass- Status LED- Metal housing- Power supply via 9 V DC power supply (2.1 mm x 5.5 mm barrel connector, polarity (-) inside, not included), battery operation is not supported- Power consumption: 25 mA- Dimensions (L x W x H): 117 x 92 x 57 mm- Hand made in USA |
|
| EarthQuaker Devices : Park Fuzz Sound (3 comments)
- Vintage germanium fuzz- True to the original replica of the original Park Fuzz sound, de...(+) - Vintage germanium fuzz- True to the original replica of the original Park Fuzz sound, developed in collaboration with Park amplifiers- NOS Germanium transistors- True bypass- Controls for volume, treble/bass, fuzz- Bypass foot pedal- Status LED- Metal housing- 6.3 mm Mono jack in/output- Powered via 9 V battery or 9 V power adapter with 2.1 x 5.5 mm AC adapter, negative polarity inside (not included)- Current consumption: 3 mA- Dimensions (L x W x H): 121 x 64 x 57 mm- Weight: Approx. 350 g |
|
| EarthQuaker Devices : Rainbow Machine V2 (12 comments)
- Polyphonic pitch-shifting synthesiser- Real-time pitch shifting with digital oscillators...(+) - Polyphonic pitch-shifting synthesiser- Real-time pitch shifting with digital oscillators- Improved circuit with less noise and improved performance- Higher output with lower signal-to-noise ratio- Suitable for guitar, bass, vocals, keyboards etc.- True bypass- Pitch, primary, secondary, tracking, magic and sound controls- Noiseless relay-based soft-touch circuit- Activate and Magic footswitch works as a latching and momentary switch- Activate footswitch- Magic footswitch- Connection for expression pedal- 6.3 mm mono jack input / output- Fully analogoue dry bypass- 2 x Status LEDs- Metal housing- Power supply via 9 V DC power supply (2.1 mm x 5.5 mm coaxial connection, polarity (-) inside, not included)- Dimensions (L x W x H): 117 x 92 x 57 mm- Power consumption: 60 mA- Handmade in USA |
|
| EarthQuaker Devices : Afterneath V3 Bundle PS B RB
EarthQuaker Devices Afterneath V3 Effects Pedal for Electric Guitar-
Reverb-
Atmospheric...(+) EarthQuaker Devices Afterneath V3 Effects Pedal for Electric Guitar-
Reverb-
Atmospheric, spreading magical reverb sounds-
9 Selectable modes change the function of the drag controller (Unquantized, Unquantized with Slew, Unquantized, Volt / Octave, Chromatic Scale, Minor Scale, Major Scale (Lydian), Pentatonic Scale, Octaves & Fifths, Octaves)-
Tails / No Tails switchable-
With activated tails, the wet signal fades slowly and naturally after the effect is switched off-
Noiseless relay-based soft-touch circuit functions as a latching and momentary switch (Flexi-Switch Technology)-
True bypass-
Controls for Length, Diffuse, Dampen, Reflect, Drag and Mix-
Bypass footswitch-
Status LED-
Metal housing-
6.3 mm Mono jack input / output-
6.3 mm Expression pedal input-
Power supply via optional 9 V DC power supply, 2.1 x 5.5 mm barrel connector, polarity (-) inside-
Current consumption 100 mA-
Dimensions (L x W x H): 121 x 64 x 57 mm-
Weight: 400 g Rockboard Pedalsafe Type B Rockboard Protective Cover-
Suitable for EarthQuaker Devices, Seymour Duncan, and many more pedals with standard housing size-
Suitable for most effect pedals with a housing size around 122 x 67 x 40 mm-
With pedal plate for mounting on Rockboard pedal boards with click system-
Offset of QuickMount mounting holes (W x D): 57 - 59 x 110 - 112 mm / 59 x 89 mm-
Protects effect pedals from dirt and weather conditions-
Protects the settings from unintentionally shifting-
Mounts effect pedals securely on Rockboard boards-
No permanent modifications required-
Includes QuickMount pedal mounting plate type B for RockBoard pedal boards, replacement screws, and shim plate (for lifting the pedal slightly) |
|
| EarthQuaker Devices : Levitation Bundle PS B
EarthQuaker Devices Levitation Reverb V2 Effects Pedal-
Vintage Spring and Plate Reverb- ...(+) EarthQuaker Devices Levitation Reverb V2 Effects Pedal-
Vintage Spring and Plate Reverb-
Operates digitally-
True Bypass-
Controls: Decay, Atmosphere, Mix, Tone-
Toggle switch for selecting between long and short reverb lengths-
Bypass footswitch-
Status LED-
Metal housing-
6.3 mm Mono jack in-/output mounted on the front-
Powered via 9 V DC power supply (2.1 mm x 5.5 mm barrel connector, negative polarity inside, not included)-
Battery operation is not possible-
Dimensions (L x W x H): 117 x 64 x 57 mm-
Power consumption: 50 mA-
Handmade in the USA Rockboard Pedalsafe Type B universal Protective Cover-
For EarthQuaker Devices, Seymour Duncan and many more pedals with standard cases-
Fits most effect pedals with case dimensions of approx. 122 x 67 x 40 mm-
With base plate for mounting on pedalboards of any manufacturer-
Spacing of mounting holes (W x D): 57-59 x 110-112 mm and 59 x 89 mm-
Protects effect pedals from dirt and weather influences-
Keeps settings from accidental adjustment-
Mounts effects pedals securely on almost all pedalboards-
No permanent modifications required-
Includes universal pedal mounting plate type B, silicone adhesive pad, spare screws and shim plate to lift pedals easily |
|
| EarthQuaker Devices : Levitation Bundle PS B RB
EarthQuaker Devices Levitation Reverb V2 Effects Pedal-
Vintage Spring and Plate Reverb- ...(+) EarthQuaker Devices Levitation Reverb V2 Effects Pedal-
Vintage Spring and Plate Reverb-
Operates digitally-
True Bypass-
Controls: Decay, Atmosphere, Mix, Tone-
Toggle switch for selecting between long and short reverb lengths-
Bypass footswitch-
Status LED-
Metal housing-
6.3 mm Mono jack in-/output mounted on the front-
Powered via 9 V DC power supply (2.1 mm x 5.5 mm barrel connector, negative polarity inside, not included)-
Battery operation is not possible-
Dimensions (L x W x H): 117 x 64 x 57 mm-
Power consumption: 50 mA-
Handmade in the USA Rockboard Pedalsafe Type B Rockboard Protective Cover-
Suitable for EarthQuaker Devices, Seymour Duncan, and many more pedals with standard housing size-
Suitable for most effect pedals with a housing size around 122 x 67 x 40 mm-
With pedal plate for mounting on Rockboard pedal boards with click system-
Offset of QuickMount mounting holes (W x D): 57 - 59 x 110 - 112 mm / 59 x 89 mm-
Protects effect pedals from dirt and weather conditions-
Protects the settings from unintentionally shifting-
Mounts effect pedals securely on Rockboard boards-
No permanent modifications required-
Includes QuickMount pedal mounting plate type B for RockBoard pedal boards, replacement screws, and shim plate (for lifting the pedal slightly) |
|
| EarthQuaker Devices : Acapulco Gold V2 (19 comments)
- Power Amp Style Distortion Pedal- Based on the power amp distortion of the Sunn Amp Vint...(+) - Power Amp Style Distortion Pedal- Based on the power amp distortion of the Sunn Amp Vintage Model T- Severe distortion up to the 'Fuzz'- Reacts very dynamically- 1 unlabeled output volume control- Bypass footswitch- Noiseless relay-based soft-touch circuit- Status LED- Front-side 6.3 mm mono-jack inputs / outputs- Metal housing- Power supply via 9 V battery or 9 V power supply (2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included)- Dimensions (L x W x H): 128 x 66 x 57 mm- Power consumption 30 mA- Hand-made in USA |
|