| Fredenstein : Bento 2
Audio routing and link function can be set on the back panel- Balanced XLR and jack inputs...(+) Audio routing and link function can be set on the back panel- Balanced XLR and jack inputs and outputs per slot- Internal power supply: 90 V AC - 240 V AC, 50-60 Hz,+/- 16Volt (+/- 900mA) and +48V (35mA)- On/off switch in front and back- Design: 19"/ 1U |
|
| Fredenstein : Bento 6DS (3 comments)
With LCD colour display for exact representation of the set parameters, current consumptio...(+) With LCD colour display for exact representation of the set parameters, current consumption, output voltage as well as the temperature- Internal power supply +/- 16 V / +48 V- Reduced cabling requirements, since the audiorouting can be programmed from card to card on the display- Intelligent voltage distribution- Energy efficient- Extremely low noise integrated 3 A power supply- Suitable 19 " rack kit: Art. 341739 (not included) |
|
| Fredenstein : Bento 8 Pure Analog (24 comments)
With analogue power supply +/- 16 Volt / +48 Volt- 500 mA per slot- Reduced cabling effort...(+) With analogue power supply +/- 16 Volt / +48 Volt- 500 mA per slot- Reduced cabling effort, as the audio routing can be switched from card to card on the rear panel- Compressor link and ground lift switch- Intelligent voltage distribution- Energy efficient- Design: 19" / 3U |
|
| Fredenstein : Bento 8 Pro Pure Analog (11 comments)
With analogue power supply +/- 16 Volt / +48 Volt- 500 mA per slot- Reduced cabling effort...(+) With analogue power supply +/- 16 Volt / +48 Volt- 500 mA per slot- Reduced cabling effort, as the audio routing can be switched from card to card on the rear panel- Compressor link and ground lift switch- Intelligent voltage distribution- Energy efficient- Integrated monitoring section with headphone amplifier as well as 2x VU meters to control the individual channels- Design: 19" / 3U |
|
| Fredenstein : Bento 2 Pure Analog
For modules of the API 500 system- With analogue power supply +/- 16Volt/+48Volt- 500mA pe...(+) For modules of the API 500 system- With analogue power supply +/- 16Volt/+48Volt- 500mA per slot- Reduced cabling effort, as audio routing can be switched on the rear panel- Compressor link switch- Intelligent voltage distribution- Energy-efficient- Can be extended by 2 additional slots with Bento 2 Extension (art. 566212, not included)- Internal power supply unit- Construction: Desktop |
|
| Fredenstein : V.A.S. Comp (23 comments)
Fully discrete OPA2 operational amplifier- American output transformer- 2x 12-Digit LED di...(+) Fully discrete OPA2 operational amplifier- American output transformer- 2x 12-Digit LED display for level reduction and output level- Adjustable release time from 70 milliseconds up to 2.5 seconds- Adjustable attack time of 0.5 milliseconds up to 50 milliseconds- Adjustable ratio from 2:1 to 20:1- Switchable side chain filter, adjustable from 6 Hz to 2 KHz- Mixable uncompressed and compressed signals- Line input: XLR and jack 6.3 mm- Line Out: XLR and 6.3 mm jack- Link input: 6.3 mm jack- Integrated power supply- Power switch on the rear side- Desktop format- Design: 9.5"/ 1U |
|
| Fredenstein : Bento 6SB (11 comments)
Internal power supply +/-16 V / +48 V- Reduced cabling, as the audio routing can be switch...(+) Internal power supply +/-16 V / +48 V- Reduced cabling, as the audio routing can be switched from card to card on the rear panel- Intelligent voltage distribution- Energy efficient- Extremely low-noise integrated power supply- Colour: Black- Suitable 19" rack kit: Article Nr. 341739 (not included) |
|
| Fredenstein : Blank Panel Black (45 comments)For 500 Series module frames- Colour: Black |
|
| Fredenstein : Bento 10S (28 comments)
For Fredenstein Series 500 modules- Internal 90- 240 V AC power supply with +/- 16 V /+48...(+) For Fredenstein Series 500 modules- Internal 90- 240 V AC power supply with +/- 16 V /+48 V- Built-in audio routing: modules can be daisy-chained via switches on the back panel- Intelligent voltage distribution- Energy efficient- Extremely low noise integrated power supply- Incl. 19" rackmount |
|
| Fredenstein : Artistic MicPre SE (4 comments)
500 Module- Infinitely variable input gain from +20 dB to +65 dB- Discrete operational amp...(+) 500 Module- Infinitely variable input gain from +20 dB to +65 dB- Discrete operational amplifier OPA2- High-impedance 2 MOhm DI- POL switch for phase inversion- -20 dB pad- Low cut at 120 Hz- Switchable 48 V phantom powering- Frequency response from 20 to 20,000 Hz +/- 1 dB- LED indicator for output level (>-30 dB)- LED peak meter- High-impedance DI input 6.3 mm jack on front with 2 MO for balanced and unbalanced signals- Construction: 500 module |
|
| Fredenstein : Bento 6S (68 comments)
Internal power supply +/- 16 V/ +48 V- Reduced cabling, so that the audio routing may be s...(+) Internal power supply +/- 16 V/ +48 V- Reduced cabling, so that the audio routing may be switched from card to card on the rear panel- Intelligent power distribution- Energy efficient- Low-noise integrated power supply- Matching 19" rack kit available under Article Nr 341739 (not included) |
|
| Fredenstein : Artistic EQ (9 comments)
With Colour function for tube-like sound- Discrete operational amplifier OPA2- Gain contro...(+) With Colour function for tube-like sound- Discrete operational amplifier OPA2- Gain control from -14 dB to +14 dB- Low frequencies steplessly adjustable from 30 to 300 Hz- Middle frequencies steplessly adjustable from 300 to 3,000 Hz- High frequencies steplessly adjustable from 2,000 to 20,000 Hz- Shelf and bell function- LED Display for output peak level (+20 dB)- LED Display for output level (>-30 dB)- Bypass switch- Design: 500 Series module |
|
| Fredenstein : F609 Mic Preamp (2 comments)
Two double triode tubes (ECC802S and ECC803S)- American input and output transformers- DI ...(+) Two double triode tubes (ECC802S and ECC803S)- American input and output transformers- DI input 6.3 mm jack 500 kOhm- + 48V phantom power can be switched- High pass filter switchable 50 Hz or 100 Hz- -20 dB Pad switchable- Max. Input Level: +12 dBu- Max. Output Level: + 26 dBu- Illuminated VU display- Clip LED- Construction: 500 module |
|
| Fredenstein : Artistic Comp Plus (10 comments)
Fully discrete built-in OPA2 operational amplifier- American output transformer- Made comp...(+) Fully discrete built-in OPA2 operational amplifier- American output transformer- Made completely using SMT technology- Adjustable release time from 70 milliseconds up to 2.5 seconds- Adjustable attack times from 0.5, 5, and 25 milliseconds- Adjustable ratio from 2:1 to 20:1- SC Filter selects the low-cut filter in the side-chain from 150 or 300 Hz- Output mixer between the compressed and uncompressed signals- 12-Digit LED display- External side-chain option (possible only with additional AUX inputs from the Bento series)- Design: 500 module |
|
| Fredenstein : Bento 2 Pure Analog Extension
2-Slot rack for modules of the API 500 system- Reduced cabling effort, as audio routing ca...(+) 2-Slot rack for modules of the API 500 system- Reduced cabling effort, as audio routing can be switched at the rear panel- Compressor link switch- Intelligent voltage distribution- Energy-efficient- Power supply through base unit Bento 2 Pure Analog (art. 566203, not included)- 2 Inputs: XLR- 2 Outputs: XLR- Power-Link connector for power supply of Bento 2 Pure Analog- Design: Desktop |
|
| Fredenstein : Artistic Mic Pre Plus
500 Series module- Discrete operational amplifier OPA2- High impedance 2 MOhm instrument i...(+) 500 Series module- Discrete operational amplifier OPA2- High impedance 2 MOhm instrument input- Switchable input impedance from 1500 Ohm to 300 Ohm- Switchable 48V phantom power- -20dB Pad- Colour function can be added to the original signal- Gain control GAIN from 20dB to 65 dB- LED Display for output peak level (+20 dB) and signal- LED Display for output level (>-30 dB)- LED Display for colour function- POL switch to invert the phase- Design: 500 Series module |
|
| Fredenstein : Artistic Leveler (5 comments)
With "Multi Channel Link" function- External sidechain input via the AUX input socket when...(+) With "Multi Channel Link" function- External sidechain input via the AUX input socket when using a Bento6 / 10 500 rack- Discrete operational amplifier OPA2 (changeable)- Reverse Mancini circuit- Input gain knob, ratio, release- Output level and wet / dry mix function- Attack adjustable (12, 25 and 50 ms)- Adjustable ratio from 1.5: 1 to 7.5: 1- Switchable side-chain filters of 150 or 300 Hz- 16-Digit LED display for level reduction- Clip LED- Cascadable with second Artistic Leveler- Bypass switch- Type: 500 module |
|
| Fredenstein : Blank Panel Gold (23 comments)Colour: Gold- For 500 module frames |
|
| Fredenstein : Bento 10SB (3 comments)
19" Rack for API 500 system modules- Internal 90-240 V (AC) power supply with +/- 16Volt/...(+) 19" Rack for API 500 system modules- Internal 90-240 V (AC) power supply with +/- 16Volt/+48Volt- Reduced cabling effort, as the audio routing can be switched from card to card on the rear panel- Intelligent voltage distribution- Energy efficient- Extremely low-noise integrated power supply unit- Colour: Black- Includes 19" rack kit |
|