| Keeley : Compressor Plus (208 comments)
- Compressor- Parallel compression preserves dynamic peaks and adds sustain- True bypass- ...(+) - Compressor- Parallel compression preserves dynamic peaks and adds sustain- True bypass- Controls for Sustain, Level, Blend and Tone- Single Coil/Humbucker toggle switch to select between 2 Attack/Release settings- Bypass foot-switch- Metal housing- Status LED- 6.3 mm Mono jack input/ output- Power supply with 9 V battery or via 9 V DC power supply (2.1 mm x 5.5 mm power connection, polarity (-) inside, not included)- Power consumption: 10 mA- Dimensions (L x W x H): 112 x 68 x 51 mm- Weight: 280 g- Made in USA |
|
| Keeley : HALO Andy Timmons Dual Echo (9 comments)
- Andy Timmons signature pedal- True stereo delay / echo- 2 Separate delay sections (A / B...(+) - Andy Timmons signature pedal- True stereo delay / echo- 2 Separate delay sections (A / B)- 1500 ms max. delay time for each section- 5 Selectable delay rhythm modes: Quarter Note / Dotted Eighth / Halo / Bucket Brigade (BBD) / Multi-Tap Tape Delay- 8 Factory presets with new delay and modulation sounds: 4 banks of 2 presets each - Andy Timmons signature 'Halo' sound stored as preset- DREAM multi-core DSP for pristine sound quality- Saturate control gives the signal a tape-like saturation and texture- High pass filter for adjustable bass cut from 0 - 300 Hz- Tone control for the effect signal- Soft Stomp footswitch for tap tempo, infinite hold, preset control and more- Onboard and remote tap tempo possible- Infinite Hold with maximum feedback- Remote switching and programmable expression pedal control- Intuitive alt controls provide full access to additional effect parameters- Controls for Time/HPF, Level/Saturate, Rate/Tone, Depth/Rhythm, Feedback- Preset toggle switch- 2x Footswitches (A / B)- Status LEDs- Metal housing- Switchable between True Bypass or Buffered Trails- 2 Inputs (true stereo): 6.3 mm mono jack- 2 Outputs (true stereo): 6.3 mm mono jacks- Connection for expression pedals and external tap tempo footswitches: 6.3 mm jack (TRS)- Footswitch connection: 6.3 mm jack (TRS)- Mains adapter connection: Hollow female plug 5.5 x 2.1 mm (negative pole inside)- Power supply via 9 V DC mains adapter (not included)- Power consumption: 160 mA- Dimensions (L x W x H): 120 x 68 x 58 mm- Weight: approx. 350 g |
|
| Keeley : Parallax - Spatial Generator
- Delay / reverb- Limited to 1000 pieces- Both effects can be used separately or together-...(+) - Delay / reverb- Limited to 1000 pieces- Both effects can be used separately or together- 3 Reverb modes (reverb, reverse, soft focus)- 3 Delay modulation modes (light, deep, off)- Selectable bypass (True Bypass / Trails)- Reverb section controls for blend, warmth, decay, depth, delay section controls for blend, rate, time, repeats- Reverb section toggle switch for selecting between reverb modes- Delay Section toggle switch for selecting between delay modulation modes- Reverb footswitch- Delay footswitch- Internal Delay Trails switch to select between True/Trails Bypass for the Delay- Internal Reverb Trails switch to select between True/Trails Bypass for the Reverb- Metal housing- Status LEDs- Input and output: 6.3 mm TRS jack- Power supply via optional 9 V DC power supply (2.1 x 5.5 mm hollow plug, polarity (-) inside, not included)- Power consumption: approx. 75 mA- Dimensions (L x W x H): 120 x 95 x 50 mm- Weight approx. 390 g- Made in USA |
|
| Keeley : Caverns Delay Reverb V2 (48 comments)
- Delay / Reverb- Completely revised version of the popular Keeley Caverns Delay / Reverb-...(+) - Delay / Reverb- Completely revised version of the popular Keeley Caverns Delay / Reverb- Both effects can be used separately or together- Switching system mode for the separate implementation of both effects, also with looper switchers- 3 Reverb modes: shimmer / spring / modulated- 3 Delay time modulation modes: deep / light / off- Switchable bypass: true bypass / trails- Reverb section controls for blend, warmth, decay, and rate- Delay section controls for time, blend, repeat, rate- Reverb section toggle switch to select between the different reverb modes- Delay section toggle switch to select between the different delay time modulation modes- Reverb footswitch- Delay footswitch- Internal delay trails switch to select between true bypass and trails for delay- Internal reverb trails switch for selecting between true bypass and trails for reverb- 4 internal DIP switches for activating the switching system mode- Metal housing- Status LEDs- 6.3 mm mono jack input / output- Power supply via 9V DC power supply (2.1 mm x 5.5 mm, centre negative (-) is not included)- Current consumption approx. 75 mA- Dimensions (L x W x H): 120 x 95 x 50 mm- Weight: 450 g- Made in the USA |
|
| Keeley : Compressor Mini (12 comments)
- Compressor / sustainer- Parallel compression with auto blend improves clarity and defini...(+) - Compressor / sustainer- Parallel compression with auto blend improves clarity and definition of notes- Improved sustain range for even more subtle compression- New transient release time works equally well with humbuckers or single coils- Automatic tone recovery circuit clears up treble range during heavy compression- Integrated preamp for incredible guitar sound- True bypass- Level and comp controls- Bypass footswitch- Status LED- Metal housing- Input and output: 6.3 mm mono jack- Power supply via optional 9V DC power supply unit, 2.1 x 5.5 mm hollow female plug, polarity (-) inside (not included)- Power consumption 10 mA- Dimensions (L x W x H): 95 x 47 x 50 mm- Weight approx. 140 g |
|
| Keeley : Dark Side V2 (40 comments)
- Fuzz, phaser, Uni-Vibe, Flanger, Rotary, Delay- Controls for level (for delay or modulat...(+) - Fuzz, phaser, Uni-Vibe, Flanger, Rotary, Delay- Controls for level (for delay or modulation) Blend / Tape Head Depth / Time, Rate / feedback filter, and Fuzz Level (for Fuzz)- Toggle switch for switching between "Flange / Rotary", "delay" or "phase / U-Vibe" effects- Rocker Switch to toggle between "Flat", "Full" or "Scoop" modes- Order switch for changing the order of fuzz and Mod Section in the signal chain- True bypass- Metal casing- Modulating bypass footswitch- Modulation status LED- Fuzz bypass footswitch- Fuzz Status LED- 6.3 mm mono-latches the input / output- 6.3 mm for controlling the expression input RATE- Powered by 9 V DC power supply (2.1 mm x 5.5 mm barrel connector, polarity (-) inside, not included)- Power consumption: 75mA- Dimensions (L x W x H): 99 x 120 x 53 mm- Weight: 425 g |
|
| Keeley : Hydra Stereo Reverb / Tremolo (14 comments)
- True Stereo High-Fidelity Reverb and Tremolo- 3 Selectable studio quality reverb modes: ...(+) - True Stereo High-Fidelity Reverb and Tremolo- 3 Selectable studio quality reverb modes: Spring, Plate, Room- 3 Selectable tremolo modes with vintage voicing: harmonic, vibrato, sine wave- Onboard and remote tap tempo- 3 Footswitchable presets- Intuitive Alt control options offer full access to additional effect parameters- Infinite Hold Reverb Trails possible via foot switch- Expression pedal control can be assigned to each controller- The order of the effects can be changed as desired- True bypass or buffered trails (switchable)- Controls for Rate / Trem Sync, Depth / Trem Level, Dwell / Wet / Dry, Mixer / Reverb Modifier, Colour- Toggle switch selects Reverb and Tremolo modes- Reverb bypass footswitch- Tremolo / Tap Tempo footswitch- Status LEDs- 2 x 6.3 mm Mono jack input / output (true stereo)- 6.3 mm Expression pedal input- 6.3 mm Input for external foot switch- Power supply via 9 V DC power supply (2.1 mm x 5.5 mm barrel connector, polarity (-) inside - not included)- Current consumption 115 mA- Metal housing- Dimensions (L x W x H): 120 x 68 x 58 mm- Weight: approx. 350 g |
|
| Keeley : 30ms Automatic Double Tracker (28 comments)
- Stereo effects pedal- Offers a range of studio-quality doubling effects to make instrume...(+) - Stereo effects pedal- Offers a range of studio-quality doubling effects to make instruments sound fatter and fuller- Also included is a reverb that simulates the famous echo chamber in Studio Two of the Abbey Road Studios- The Keeley 30ms is suitable for guitar, bass, keyboards and also vocals- Controls: Tuning, time, reverb and level- Three switchable modes: Dimension, Abbey Mode and Slapback- Suitable mains adapter: e.g. article nr 409939 (not included) |
|
| Keeley : Bubble Tron (14 comments)
- Dynamic Flange and Phaser / Random Filter / Sample & Hold- 3 Modes: Filter, Flange and P...(+) - Dynamic Flange and Phaser / Random Filter / Sample & Hold- 3 Modes: Filter, Flange and Phaser- Controllers for Rate (feedback in Flange mode), Depth (LFO shape in Filter mode), Level and Sens (resonance in Filter mode)- Toggle switch to select "FILTER", "PHASE" & "FLANGE" mode- True bypass- Metal housing- Status LED- Bypass footswitch- 6.3 mm mono jack input/ output- Power supply via 9 V DC power supply unit (not included, suitable PSU e.g. article nr 409939)- Current consumption: 65 mA- Dimensions (L x W x H): 112 x 68 x 51 mm- Weight: 277 g |
|
| Keeley : Dyno My Roto (11 comments)
- Rotary RotoFlange Tri-Chorus Rotary Flanger- True Bypass- Controls for Rate Depth Textur...(+) - Rotary RotoFlange Tri-Chorus Rotary Flanger- True Bypass- Controls for Rate Depth Texture and Level- Toggle switch for switching between "Tri-Chorus" "Rotary / Proximity" or "Rotoflange" mode- Bypass foot switch- Status LED- Metal housing- 6.3 mm mono jack input / output- Power supply via 9 V DC power supply 2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included), no battery operation possible- Power consumption 65 mA- Dimensions (L x W x H): 112 x 68 x 51 mm- Weight: 277 g- Made in the USA |
|
| Keeley : Eccos Delay / Looper (10 comments)
- True Stereo Delay and Looper- Neo-Vintage Delay with tape-flange modulation in studio qu...(+) - True Stereo Delay and Looper- Neo-Vintage Delay with tape-flange modulation in studio quality- 3 Memory presets- Tap Tempo with switchable subdivisions for the delay effect- Flexible control options for tone and time-based settings via the Alt Hold feature- Fully featured looper with reverse and half-speed loop effects- 120 Seconds loop time in mono, 60 seconds in stereo- Infinite number of looper layers- True bypass or buffered trails (switchable)- Controls for Time, Manual, Blend, Vibe, Rate, Tone, Depth, Regen, Feedback- Mode switch to choose between delay / looper- Bypass foot switch- Tap Tempo footswitch- Status LEDs- Metal housing- Input and output: 2x 6.3 mm mono jack (true stereo)- Expression pedal input: 6.3 mm mono jack- Input for external foot switch: 6.3 mm- Power supply via optional 9V DC power supply (2.1 x 5.5 mm barrel connector, polarity (-) inside)- Current consumption 115 mA- Dimensions (L x W x H) 120 x 68 x 58 mm- Weight approx. 350 g |
|
| Keeley : Memphis Sun Echo and Reverb (17 comments)
- Combines a Lo-Fi slapback echo, room reverb and double tracker- A replica of the classic...(+) - Combines a Lo-Fi slapback echo, room reverb and double tracker- A replica of the classic Memphis studio in which Rock'n'Roll was born- This pedal produces a warm and natural sounding echo and reverb- Controls: Time, Rain / Mod, Reverb and Mix- Three switchable modes: ECHO 600 (Echo for Long Delays + Raumhall), SUN mode (AutoTrack duplication and slapback with short delays + room reverb), REVERB (Studio room reverb simulation)- Operation with power supply (not included, suitable power supply available under Art.409939)- Power consumption: 65 mA |
|
| Keeley : Moon Op-Amp Fuzz
- Fuzz- Dmassive sound thanks to 4-way opamp- Controls for level, filter, fuzz- Filter tog...(+) - Fuzz- Dmassive sound thanks to 4-way opamp- Controls for level, filter, fuzz- Filter toggle switch for switching between flat, full and scooped EQ- Status LED- Metal housing- True bypass- Input: 6.3 mm mono jack- Output: 6.3 mm mono jack- Bypass footswitch- Mains adapter connection: Hollow female plug 5.5 x 2.1 mm (negative pole inside)- Power supply via 9 V battery or optional 9 V DC power supply unit (not included)- Power consumption: 10 mA- Dimensions (L x W x H): 113 x 56 x 73 mm- Weight: 268 g- Incl. battery- Made in USA |
|
| Keeley : Vibe-O-Verb (5 comments)
- 3 Mode modulated reverb- Controls: Rate, Depth, Decay and Blend- Toggle switch for switc...(+) - 3 Mode modulated reverb- Controls: Rate, Depth, Decay and Blend- Toggle switch for switching between "HARMONIC", "VIBRATO" or "PHASER" modes- Metal housing- True Bypass- Status LED- Bypass footswitch- 6.3 mm Mono jack input / output- Powered via 9V power supply (not included, corresponding item: Article Nr 409939)- Power consumption: 65 mA- Dimensions (L x W x H): 112 x 68 x 51 mm- Weight: 277 g |
|
| Keeley : Aurora Digital Reverb (11 comments)
- 3-Mode reverb- Warmth, Decay, Slapback and Blend controls- Toggle switch to toggle betwe...(+) - 3-Mode reverb- Warmth, Decay, Slapback and Blend controls- Toggle switch to toggle between "Hall", "Plate" or "Room" mode- Metal housing- True bypass- Status LED- Bypass footswitch- 6.3 mm Mono jack input / output- Power supply via 9 Volt power supply unit (not included in delivery, suitable power supply available under article nr 409939)- Power consumption: 65 mA- Dimensions (L x W x H): 112 x 68 x 51 mm- Weight: 277 g |
|
| Keeley : Nocturner Dark Reverb
- Reverb- Metal housing- True bypass- Status LED- Controllers for decay, tweek, warmth and...(+) - Reverb- Metal housing- True bypass- Status LED- Controllers for decay, tweek, warmth and blend- Rocker switch to toggle between reverse, hall reverb and shimmer mode- Bypass footswitch- 6.3 mm Mono jack input/ output- Powered via 9V battery or 9V power supply unit (not included, suitable power supply available under article nr 409939)- Power consumption: 70mA- Dimensions (L x W x H): 112 x 68 x 51 mm- Weight: 262 g |
|
| Keeley : Seafoam Plus Chorus (4 comments)
- Automatic Double Tracker, Chorus, Vibrato- Controls for Space, Rate, Depth and Mix- Togg...(+) - Automatic Double Tracker, Chorus, Vibrato- Controls for Space, Rate, Depth and Mix- Toggle switch to toggle between "Dual Chorus", "Seaform" or "ADT" mode- Internal DIP switch for switching the BASS mode- Internal DIP switch to selecting between "Vintage" and "Modern" modes- Metal housing- True bypass- Status LED- Bypass footswitch- 6.3 mm mono jack input/ output- Power supply via 9 V power supply unit (not included, suitable power supply e.g. article nr 409939)- Current consumption: 65 mA- Dimensions (L x W x H): 112 x 68 x 51 mm- Weight: 277 g |
|