| Laserworld : GS Extension Cable 5m
(1 comments)
Extension Cable- For the Laserworld Garden Star Series - Length: approx. 5 m - Suitable fo...(+) Extension Cable- For the Laserworld Garden Star Series - Length: approx. 5 m - Suitable for GS-400RGB-W Pro |
|
| Laserworld : ILDA Extension Cable 10m
(33 comments)
ILDA Extension Cable- ILDA signal cable - Length: 10 m - Connectors: DB25 male > female - ...(+) ILDA Extension Cable- ILDA signal cable - Length: 10 m - Connectors: DB25 male > female - With thumbscrew fittings |
|
| Laserworld : Safety Unit
'Emergency Off' Safety Unit- Can be connected to a projector via a RS-232 connector at the...(+) 'Emergency Off' Safety Unit- Can be connected to a projector via a RS-232 connector at the interlock connection interface - Suitable for Laserworld projectors with an interlock connection - Integrated key-operated switch - Includes 5 m connection cable with RS-232 plugs |
|
| Laserworld : RTI Safety Adapter SUB-D RJ45
RTI Safety Adapter- SUB-D to RJ45 for tarm, Laserworld and RTI devices with RJ45 interlock...(+) RTI Safety Adapter- SUB-D to RJ45 for tarm, Laserworld and RTI devices with RJ45 interlock connection - For up to three lasers - 3x RJ45 output sockets |
|
| Laserworld : EL-230RGB
(39 comments)
RGB Laser- Total output of up to 230 mW - Typical overall output: 230 mW - Guaranteed powe...(+) RGB Laser- Total output of up to 230 mW - Typical overall output: 230 mW - Guaranteed power: 170 mW - Power red: 100 mW / 650 nm - Power green: 20 mW / 532 nm - Power blue: 50 mW / 445 nm - Beam parameters approx. 4 mm / 1 mrad - Laser sources: Diode - DPSS laser - Laser class: 3b - Operating modes: Stand-alone, Music mode, DMX, - Scanner: High-speed stepper motors 2-5 kpps - Scan angle max.: 30° - Basic patterns: Approx. 50 (layers, tunnels, fences, waves, etc.) - Accessories: Power cable, manual, interlock, key - Power supply: 85V - 250V AC - Power consumption: 15 W - Dimensions (W x D x H): 188 x 165 x 106 mm - Weight: 2.6 kg |
|
| Laserworld : Safety Unit Pro
Safety Unit- With built-in key switch and 5 meters of cable - Designed to switch off laser...(+) Safety Unit- With built-in key switch and 5 meters of cable - Designed to switch off laser projectors in dangerous situations via the interlock interface - In the case of a power failure, the continuation of the laser show must be explicitly confirmed with the help of this safety unit via the 'Restart button' - This unit can be connected to the projector via the standard Interlock RS-232 interface (pin 1 and 2) |
|
| Laserworld : EL-400RGB
(12 comments)
Laserworld EL-400 RGB QS- RGB laser system with a total output of up to 400 mW - Overall p...(+) Laserworld EL-400 RGB QS- RGB laser system with a total output of up to 400 mW - Overall performance typical: 400 mW - Guaranteed power: 320 mW - Power Red: 110 mW / 650 nm - Green power: 50 mW / 532 nm - Power Blue: 160 mW / 445 nm - Beam parameters: approx. 3 mm / 2 mrad - Laser sources: diode - DPSS laser - Laser class: 3b - Operating modes: stand-alone, music mode, DMX - Scanner with high-speed stepper 3-8 kpps - Basic pattern: approx. 50 (levels, tunnels, grids, wave effects etc.) - Accessories: power cable, user manual, interlock, key - Power supply: 85 V - 250 V AC - Power consumption: 30 W - Dimensions (W x D x H): 255 x 245 x 100 mm - Weight: 3.9 kg |
|
| Laserworld : ShowNET + Showeditor Software
(13 comments)
SD Memory Card with Software and Interface
ILDA Laser software show editor 2015 incl. Lase...(+) SD Memory Card with Software and Interface
ILDA Laser software show editor 2015 incl. Laserworld Shownet network interface
The Laserworld Showeditor 2015 is a complete solution that includes many easy usable features for beginners and professionals
Intuitive interface for live laser shows and clear timeline for professional, media synchronous show programming
Over 100 free laser shows as well as preconfigured profiles for various MIDI controllers available
Supports DMX input and output: The software can be remotely controlled by a DMX desk or even trigger DMX devices itself - even more complex and intelligent devices
Extensive MIDI configuration options make it easy to create your own MIDI profiles
SMPTE timecode compatible for professional applications
Easy-to-use figure editor, even beginners can easily create their own characters, logos, scrolling texts or morph texts
Professional users additionally benefit from advanced features such as the abstract generator, colour adjustments and various output optimiser tools
The Laserworld ShowNET interface has a microSD card slot
On the microSD card *.ild files can be stored, which can then either be played back automatically or triggered via DMX.
Including
Software SD
ShowNET LAN-to-ILDA interface |
|
| Laserworld : EL-300RGB
Laserworld EL-300RGB is an RGB white light effect laser with adjustable color change, rota...(+) Laserworld EL-300RGB is an RGB white light effect laser with adjustable color change, rotation and strobe. Despite the clearly visible laser beams due to the evenly distributed power thanks to special optics, the Laserworld EL-300RGB is classified according to laser class 2. This means that this show laser is much safer to use than comparable laser systems in a higher laser class (3R, 3B, 4). The many fine and bright colored laser beams shine like a starry sky when they are projected onto a wall or other surface and are an eye-catcher at every party. The colors, as well as their brightness, the rotation speed and a strobe effect can be adjusted manually using a push button on the housing or via DMX. Total power typical: 300 mW; Guaranteed power: 240 mW; Power red: 80 mW / 638 nm; Power green: 60 mW / 520 nm; Power blue: 100 mW / 450 nm; Laser sources: diode; Laser class: 2; EN 60825-1: 2014; Operating modes: automatic mode, music mode, DMX, master-slave; Scan angle max .:> 50 °; Basic pattern: starry sky; Accessories: power cable, instruction manual, interlock, key; Power supply: AC 100-240V 50 / 60Hz in the power supply DC 12V (included); Power consumption: 15 W; Dimensions: 192 x 150 x 89 mm; Weight: 1.25 kg; |
|
| Laserworld : Showcontroller
Multimedia Software
Supports up to 3 Laserworld ShowNet Hardware Interfaces (DAC) Art.3856...(+) Multimedia Software
Supports up to 3 Laserworld ShowNet Hardware Interfaces (DAC) Art.385675 (must be ordered separately)
ILDA system-standard compatible
Live laser control
Tmeline-based laser show programming
250 free shows available
Drag-and-drop operation
Intuitive interface
Logo and graphic import
MIDI and DMX support
Included tools : Showcontroller RealTime / Showcontroller PicEdit / Showcontroller Tracer / Showcontroller SVG Tool, Hardware
Requirements: Dual Core PC; Windows 7/8/10 (32bit or 64bit), min. 4 GB RAM, OpenGL enabled graphics card |
|
| Laserworld : EL-900RGB
Laser Show System- Fast stepper motors with 3 - 8 kpps - Typical total power: 900 mW - Gua...(+) Laser Show System- Fast stepper motors with 3 - 8 kpps - Typical total power: 900 mW - Guaranteed power: 800 mW - Power Red: 400 mW / 650 nm - Green power: 150 mW / 532 nm - Power Blue: 350 mW / 450 nm - Beam parameters: Approximately 3 mm / 2 mrad - Laser sources: Diode - DPSS laser - Laser class: 3B - Operating modes: Automatic mode, music mode, DMX - Power supply: 85 V - 250 V AC - Dimensions (W x D x H): 530 x 240 x 90 mm - Weight: 5.5 kg - Includes power cable, user manual, interlock, key |
|
| Laserworld : CS 1000RGB MKII
(39 comments)
RGB Laser- Completely redesigned compact housing - Light-weight - Sturdy mounting bracket ...(+) RGB Laser- Completely redesigned compact housing - Light-weight - Sturdy mounting bracket for various mounting and positioning options, such as hanging and using as a stand - Ideal for mobile DJs and temporary laser shows, fixed installations on trusses, ceilings, or walls - Total output of up to 1000 mW / Minimum power of 800 mW - Red laser source with a wavelength of 650 nm, minimum power of> 200 mW - Green laser source with a wavelength of 532 nm, minimum power of> 70 mW - Royal-blue laser source with a wavelength of 445 nm, minimum power of> 530 mW - Brilliant colours and powerful laser beams - Beam diameter of approx. 3 mm - Beam divergence of 2.0 mrad - Galvo scanning system has a scanning speed of up to 30 kpps - Microphone sensitivity and pattern size can be adjusted via two rotary knobs on the rear panel - DMX, automatic-, as well as music modes - 200 Integrated patterns, such as waves, tunnels, circles, and more - Plus different colours and speeds - Master-Slave-Modus: Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns as the master projector - Can also be controlled by computer via the professional, integrated ILDA interface - In conjunction with laser software, you can output your own or already existing laser shows, logos, texts, but also your own graphics and animations. - Safety functions: key switch, interlock interface, and on / off switch - Ideal for semi-professional applications, as well as for bars, medium-sized clubs and discos, rental companies, mobile DJs, for private use and party venues of all kinds - Dimensions: 220 x 155 x 145 mm - Weight: 3.15 kg |
|
| Laserworld : DS-1000 RGB ShowNET
Laserworld DS-1000 RGB ShowNET comes with integrated ShowNET network interface and free la...(+) Laserworld DS-1000 RGB ShowNET comes with integrated ShowNET network interface and free laser show software. The Laserworld DS-1000RGB comes with 180 mW red at 638 nm and uses green diodes at 520 nm (120 mW). The blue diode has 700 mW power at 450 nm. Beam specifications are at great 3 mm/1.0 mrad full angle and scanning can go as fast as 30 kpps@8°, whereas the scanners can scan a maximum angle of 45°. With integrated and switchable scan fail safety. Accessories: power cable, manual, keys, interlock, allen key, Power Supply: 85V - 250V / AC, 50/60 Hz internal PSU, Power Consumption: 40W, Dimensions: 200 x 140 x 110mm (L x W x H), Weight: 2.8kg, |
|
| Laserworld : CS 2000RGB FX
The Laserworld CS-2000RGB FX adds three grating effects to the CS-2000RGB: line grating, b...(+) The Laserworld CS-2000RGB FX adds three grating effects to the CS-2000RGB: line grating, burst grating and radial grating. Total Power typical: 2'000mW, Guaranteed power: 1'600mW, Beam Specifications: ca. 3mm / 2mrad, Laser Sources: Diode, DPSS Laser, Laser Class: 4, Operation Modes: auto, music, DMX, ILDA, Scanner: galvo system, 30kpps at 4°, Scan Angle max.: 40°, Basic Patterns: ca. 200 (layers, tunnels, fences, waves, etc.), Accessories: power cable, manual, interlock connector, key, Power Supply: 85V - 250V AC, Power Consumption: 120 W, Dimensions: 190/274/160 mm, Weight: 4.75 kg |
|
| Laserworld : DS-2000 RGB ShowNET
Laserworld DS-2000 RGB ShowNET comes with integrated ShowNET network interface and free la...(+) Laserworld DS-2000 RGB ShowNET comes with integrated ShowNET network interface and free laser show software. The Laserworld DS-2000RGB comes with 450 mW red at 638 nm and uses green diodes at 520 nm (400 mW). The blue diode has 1'400 mW power at 450 nm. Beam specifications are at great 4 mm/1.1 mrad full angle and scanning can go as fast as 30 kpps@8°, whereas the scanners can scan a maximum angle of 45°. With integrated and switchable scan fail safety. Accessories: power cable, manual, keys, interlock, allen key, Power Supply: 85V - 250V / AC, 50/60 Hz internal PSU, Power Consumption: 45W, Dimensions: 210 x 170 x 145mm (L x W x H), Weight: 4,0kg, |
|
| Laserworld : DS-3000 RGB ShowNET
RGB laser- With integrated ShowNET network interface and a free laser show software - 550 ...(+) RGB laser- With integrated ShowNET network interface and a free laser show software - 550 mW red with a wavelength of 638 nm - 900 mW green with a wavelength of 520 nm - 1600 mW blue with a wavelength of 450 nm - Excellent beam characteristics with 4 mm / 1.1 mrad (full angle) - Very fast scanners with up to 30 kpps @8° - Integrated switchable scan fail safety - Laser class: 4 - Power supply: 85V - 250V / AC 50/60 Hz internal PSU - Power consumption: 80 W - Dimensions (L x W x H): 210 x 170 x 145 mm - Weight: 4.3 kg - Includes power cable, user manual, key and interlock |
|
| Laserworld : EL-500RGB KeyTex
(4 comments)
RGB Text and Pattern Projection Laser- Does not need any software or additional controller...(+) RGB Text and Pattern Projection Laser- Does not need any software or additional controller for operation - Comes with a special keyboard and an infrared remote control - With the keyboard it is possible to control the whole show laser light system - Write texts live with the keyboard - Save texts and recall them later - Animate the texts: scrolling, flipping, typing of single letters, rotations and many more features available through the keyboard - Trigger saved texts with infrared remote control - Play the preset patterns and effects in automatic mode or sound mode - this can be switched with the keyboard or the infrared remote control - Clock feature: set time and project it on any surface - The projection (texts, patterns) can be multiplied through a diffraction grating at the laser aperture - controllable via DMX - RGB projections - Many more features available! - Total Power typical: 490 mW - Guaranteed power: 400 mW - Power Red: 180 mW / 650 nm - Power Green: 80 mW / 532 nm - Power Blue: 160 mW / 445 nm - Beam Specifications: appox. 3 mm / 2 mrad - Laser Sources: DPSS, Diode - Laser Class: 3B - Operation Modes: Stand alone mode, Music mode, Text mode, Clock mode, DMX - Scanner: approx. 15 kpps @ 4°, graphics capable - Scan Angle max.: Grating approx. 90°, projection approx. 20° - Basic Patterns: approx. 50 - Accessories: Keyboard, USB extension cable, infrared remote control, Interlock adapter, keys, external power supply 12 V - Power Supply: 100 - 250 V AC - Power Consumption: 10 W - Dimensions: 210 x 165 x 85 mm - Weight: 1.64 kg - EL-500RGB KeyTEX laser projector - Keyboard for EL-500RGB KeyTEX - USB extension cable for keyboard - Infrared remote control - Interlock adapter - Keys for the key switch - External power supply |
|
| Laserworld : CS 1000RGB MKII Bundle Laserworld ILDA Extension Cable 10m |
|
(Change geographical area)
CONCERT LIGHTING
