| Morley : 20/20 Bad Horsie Wah
Pour guitare électrique- Signature Steve Vai- Mini Wah Wah- Circuit optique- Design sans ...(+) Pour guitare électrique- Signature Steve Vai- Mini Wah Wah- Circuit optique- Design sans commutateur- Tampon (Buffer) 20/20 intégré empêchant la perte de signal- 2 modes Wah commutables (Bad Horsie/Contour Wah)- Convient également pour les basses ou claviers- Couvercle de la pile Quick-Clip- Buffered Byass- Contrôles: Level, Contour- Commutateur au pied Contour Wah (commutateur silencieux)- LEDs de statut- Boîtier en acier laminé à froid- Logo Glow-in-the-Dark- Entrée/sortie sur Jack mono 6,3 mm- Fonctionne avec une pile 9V- Bloc d'alimentation 9 V DC (fiche cylindrique 2,1 x 5,5 mm, polarité négative à l'intérieur) optionnel non-fourni- Consommation de courant: 12 mA- Dimensions (L x l x H): 171 x 114 x 70 mm- Poids: 0,92 kg |
|
| Morley : Volume Commander
2 Channels switchable via footswitch, can be used independently or together- True Bypass- ...(+) 2 Channels switchable via footswitch, can be used independently or together- True Bypass- Volume control- Switch: Low-cut with three options (None, Fine, Deep), Tone (Bright, Warm)- LED display- Power supply via 9 V power supply unit or 9 V battery (not included)- Housing material: cold-rolled steel- Made in USA |
|
| Morley : BH 2 Bad Horsie Wah
Modèle signature Steve Vai dans un boîtier Morley classique- Circuit électro-optique- D...(+) Modèle signature Steve Vai dans un boîtier Morley classique- Circuit électro-optique- Design sans interrupteur- Tampon (Buffer) Premium intégré empêchant la perte de signal- 2 modes Wah commutables (Bad Horsie/Contour Wah)- Convient également pour les basses ou claviers- Couvercle de la pile Quick-Clip- Buffered Byass- Contrôles: Level, Contour- Commutateur au pied Contour Wah- LEDs de statut- Boîtier en acier laminé à froid- Logo Glow-in-the-Dark- Entrée/sortie sur Jack mono 6,3 mm- Fonctionne avec une pile 9V- Bloc d'alimentation 9 V DC (fiche cylindrique 2,1 x 5,5 mm, polarité négative à l'intérieur) optionnel non-fourni- Consommation de courant: 12 mA- Dimensions (L x l x H): 231 x 149 x 69 mm- Poids: 1,51 kg |
|
| Morley : 20/20 Power Wah Volume (8 comments)
Pour guitare, basse, clavier- Fonction wah/volume commutable au pied- Large plage de balay...(+) Pour guitare, basse, clavier- Fonction wah/volume commutable au pied- Large plage de balayage et tonalité vintage en mode wah- Clean Boost réglable (jusqu'à 20 dB) en mode wah- Circuit optique- Tampon (Buffer) 20/20 intégré empêchant la perte de signal- Couvercle de la pile Quick-Clip- Buffered Bypass- Contrôle Wah Boost- Commutateur au pied Wah/Vol (commutateur silencieux)- LED de statut- Entrée/sortie sur Jack mono 6,3 mm- Fonctionne avec une pile 9V- Bloc d'alimentation 9 V DC (fiche cylindrique 2,1 x 5,5 mm, polarité négative à l'intérieur) optionnel non-fourni- Consommation de courant: 6 mA- Boîtier en acier laminé à froid- Logo Glow-in-the-Dark- Dimensions (L x P x H): 174 x 114 x 70 mm- Poids: 0,92 kg |
|
| Morley : MTLW2 - 20/20 Lead Wah Boost (1 comments)
Circuit optique- Design sans interrupteur- Wah et boost activés automatiquement lorsque l...(+) Circuit optique- Design sans interrupteur- Wah et boost activés automatiquement lorsque la pédale est enfoncée- Tampon 20/20 intégré pour empêcher la perte de signal- Caractère sonore identique aux 20/20 Lead Wah et 20/20 Wah Boost- Potentiomètre Boost à 12h pour l'étage de gain de la wah lead classique- Le boost réglable fonctionne également sous gain unitaire (10 heures) si nécessaire- Large plage de balayage- Inducteur Custom MQ2- LED de statut- Boîtier en acier laminé à froid- Logo Glow-in-the-Dark- Couvercle de la pile Quick-Clip- Buffered Bypass- Entrée/sortie sur Jack mono 6,3 mm- Connexion pour alimentation secteur sur prise cylindrique 2,1 x 5,5 mm, polarité négative à l'intérieur- Fonctionne avec une pile 9V optionnelle non-fournie- Bloc d'alimentation 9 V DC (MO AD 9V 1A) optionnel non-fourni- Consommation de courant: 10 mA- Dimensions (L x l x H): 170 x 114 x 70 mm- Poids: 920 g |
|
| Morley : 20/20 Power Wah (5 comments)
Pour guitare, basse ou clavier- Large gamme de balayage- Ton Vintage- Circuit optique- Tam...(+) Pour guitare, basse ou clavier- Large gamme de balayage- Ton Vintage- Circuit optique- Tampon (Buffer) 20/20 intégré empêchant la perte de signal- Couvercle de la pile Quick-Clip- Buffered Bypass- Contrôle Wah Boost- Commutateur au pied Wah (commutateur silencieux)- LEDs de statut- Boîtier en acier laminé à froid- Logo Glow-in-the-Dark- Entrée/sortie sur Jack mono 6,3 mm- Fonctionne avec une pile 9V- Bloc d'alimentation 9 V DC (fiche cylindrique 2,1 x 5,5 mm, polarité négative à l'intérieur) optionnel non-fourni- Consommation de courant: 6 mA- Dimensions (L x l x H): 171 x 114 x 70 mm- Poids: 920 g- Fabriquée aux USA |
|
| Morley : MTMK2 - 20/20 Wah Boost (3 comments)
Pour guitare électrique- Circuit optique- Design sans commutateur- Tampon (Buffer) 20/20 ...(+) Pour guitare électrique- Circuit optique- Design sans commutateur- Tampon (Buffer) 20/20 intégré empêchant la perte de signal- Boost 20 dB réglable- Couvercle de la pile Quick-Clip- Buffered Bypass- LED de statut- Boîtier en acier laminé à froid- Logo Glow-in-the-Dark- Entrée et sortie sur Jack mono 6,3 mm- Fonctionne avec une pile 9V- Bloc d'alimentation 9 V DC (fiche cylindrique 2,1 x 5,5 mm, polarité négative à l'intérieur) optionnel non-fourni- Consommation: 10 mA- Dimensions (LxlxH): 170 x 114 x 70 mm- Poids: 920 g- Fabriquée aux USA |
|
| Morley : AFX-1 Analog Multi-FX (1 comments)
With wah, 2-channel distortion, stereo chorus and echo- Reissue circuits of legendary Morl...(+) With wah, 2-channel distortion, stereo chorus and echo- Reissue circuits of legendary Morley vintage effects: 2000 wah, 1990 distortion, 1980 chorus and 1970 echo- Stainless steel housing in the style of the first Morley chrome finishes of the 1970s- Switchless wah, automatically switches on when in use- Deactivation of the effect when the foot is removed- Wear-free optical wah circuit- Distortion: High, Mid and Low potentiometers- Pre and post gain- Switchable HiGain option- Stereo chorus: Rate and Depth controls- Stereo echo: Controls for delay time, repeats and mix- Loop-in placed between distortion and chorus- Premium buffer- Incl. OneSpot 9 V power supply (EU)- Dimensions (L x W x H): 304.8 x 174 x 69.9 mm |
|
| Morley : Hum Eliminator Tool Box
Prevents ground loops that generate hum and buzz in the audio signal- Custom Morley isolat...(+) Prevents ground loops that generate hum and buzz in the audio signal- Custom Morley isolation transformers- Converts between balanced and unbalanced signals- Used on audio connections between interfering devices- Connected between device connection (input) and mains cable and filters unwanted mains noise- No ground lift- LED display- 6.3 mm jack and XLR sockets- Max. power consumption: 6 W- Suitable for 100 V - 240 V, 50 Hz- Dimensions (L x W x H): 196.8 x 127 x 76.2 mm |
|
| Morley : MTPFW 20/20 Power Fuzz Wah
Pour guitare électrique- Circuit optique- Design sans commutateur- Section Fuzz située a...(+) Pour guitare électrique- Circuit optique- Design sans commutateur- Section Fuzz située après l'effet Wah dans le chemin du signal- 2 modes Fuzz commutables: Vintage, Modern- Tampon (Buffer) 20/20 intégré empêchant la perte de signal- Couvercle de la pile Quick-Clip- Buffered Bypass- Contrôles: Wah Level, Intensity, Fuzz Level- Commutateur au pied Fuzz Type (commutateur silencieux)- Commutateur au pied Fuzz (commutateur silencieux)- LEDs de statut- Boîtier en acier laminé à froid- Logo Glow-in-the-Dark- Entrée/sortie sur Jack mono 6,3 mm- Fonctionne avec une pile 9V- Bloc d'alimentation 9 V DC (fiche cylindrique 2,1 x 5,5 mm, polarité négative à l'intérieur) optionnel non-fourni- Consommation de courant: 9 mA- Dimensions (L x l x H): 170 x 114 x 70 mm- Poids: 920 g- Fabriquée aux USA |
|
| Morley : Line Level Shifter (2 comments)
Line Level Shifter 2 canaux- Prises intelligentes Jack 6,3 mm et XLR- Convertit la tension...(+) Line Level Shifter 2 canaux- Prises intelligentes Jack 6,3 mm et XLR- Convertit la tension du signal entre -10 dBu et +4 dBV dans les deux sens- Empêche les boucles de masse qui provoquent des bourdonnements et des ronflettes- Mode de fonctionnement passif - aucune alimentation électrique requise- Plage de fonctionnement: 10 - 40000 Hz à +/- 1 dB- Moins de 0,002% THD à 1 kHz- Diaphonie inférieure à -97 dB- Impédance d'entrée max.: 1 kOhm- Impédance de charge min.: 10 kOhm- Dimensions (LxPxH): 120 x 82 x 44 mm- Fabriqué aux USA |
|
| Morley : Ebtech Line Level Shifter TRS
Connexions sur Jack stéréo- Convertit entre -10 dB et +4 dB (dans les deux sens)- Techno...(+) Connexions sur Jack stéréo- Convertit entre -10 dB et +4 dB (dans les deux sens)- Technologie HumEliminator intégrée- Fonctionnement passif (aucune alimentation requise)- Pour montage en rack (format 19"/1U- Dimensions (LxHxP): 19" x 1,5" x 6,5"- Fabriqué aux USA |
|
| 20/20 Volume Plus Pedal
Morley Pedals. General Merchandise. Hal Leonard #MTMV2. Published by Hal Leonard (HL.32836...(+) Morley Pedals. General Merchandise. Hal Leonard #MTMV2. Published by Hal Leonard (HL.328362).
Item Number: HL.328362
4.75x7.75 inches.
Electro-Optical circuitry and audio taper allow smooth, studio quiet volume control. Minimum Volume knob is used for a smooth transition between rhythm and lead volumes. Minimum Volume control is now foot-switchable. Powers from one 9V battery or optional Morley adapter. LED Indication, cold-rolled steel housing, quick clip battery door and two-year warranty.
Features include:
Electro-Optical Volume pedal is consistent and quiet (no pots to wear out)
Audio taper allows smooth volume control or violin type swells
Switchable Minimum Volume Control use as either a Rhythm/Lead pedals or Volume pedal with the click of a switch
Minimum Volume knob is used for a smooth transition between rhythm and lead volumes
Powers from one 9-volt battery or optional Morley 9V adapter
Cold-rolled steel housing, LED indication, quick clip battery door and two-year warranty
Works with guitar, bass or keys. |
|
| Morley : MTPDW 20/20 Distortion Wah
Circuit optique- Design sans interrupteur- Section Distortion située après l'effet Wah d...(+) Circuit optique- Design sans interrupteur- Section Distortion située après l'effet Wah dans le chemin du signal- Tampon (Buffer) 20/20 intégré empêchant la perte de signal- Couvercle de la pile Quick-Clip- Buffered Bypass- Contrôles: Dist Level, Dist Drive, Tone- Commutateur au pied Distortion (commutateur silencieux)- Status LEDs de statut- Boîtier en acier laminé à froid- Logo Glow-in-the-Dark- Entrée/sortie sur Jack mono 6,3 mm- Fonctionne avec une pile 9V- Bloc d'alimentation 9 V DC (fiche cylindrique 2,1 x 5,5 mm, polarité négative à l'intérieur) optionnel non-fourni- Consommation de courant: 9 mA- Dimensions (L x l x H): 170 x 114 x 70 mm- Poids: 920 g |
|
| Morley : MTCSW Mini Classic Switchles (4 comments)
Pour guitare électrique- Circuit électro-optique- Design sans interrupteur- Son Wah clas...(+) Pour guitare électrique- Circuit électro-optique- Design sans interrupteur- Son Wah classique- Convient également aux basses ou claviers- Inducteur Custom MQ2- Tampon "True Tone" intégré- Couvercle de la pile Quick-Clip- Buffered Bypass- LED de statut- Boîtier en acier laminé à froid- Entrée/sortie sur Jack mono 6,3 mm- Fonctionne avec une pile 9V- Bloc d'alimentation 9 V DC (fiche cylindrique 2,1 x 5,5 mm, polarité négative à l'intérieur) optionnel non-fourni- Consommation de courant: 12 mA- Dimensions (L x l x H): 174 x 114 x 63 mm- Poids: 1 kg- Fabriquée aux USA |
|
| 20/20 Lead Wah
Switchless, Optical Wah Guitar Pedal. Morley Pedals. General Merchandise. Hal Leonard #MTL...(+) Switchless, Optical Wah Guitar Pedal. Morley Pedals. General Merchandise. Hal Leonard #MTLW. Published by Hal Leonard (HL.326389).
Item Number: HL.326389
5x8 inches.
This wah pedal features juiced up wah tone with a wider frequency sweep and preset for extra gain. SAve Pedal board real estate with this guitar pedal, powered from one 9V battery or optional Morley adapter. It's equipped with a MQ2 custom inductor, LED indication, cold-rolled steel housing, quick clip battery door, glow-in-the-dark treadle grip, and a one year warranty.
Features include:
Switchless, optical wah with juiced up Wah tone
Wider frequency sweep and preset for extra gain
Buffer circuit prevents signal loss and maintains tone
6.85″ long x 4.5″ wide x 2.75″ high
Powers from one 9V battery or optional Morley adapter
MQ2 custom inductor, LED indication, cold-rolled steel housing, quick clip battery door, glow-in-the-dark treadle grip/toe-end logo
One-year warranty; lifetime warranty available with registration. |
|
| 20/20 Wah Boost Pedal
Switchless, Optical Wah Pedal with 20dB Boost. Morley Pedals. General Merchandise. Hal Leo...(+) Switchless, Optical Wah Pedal with 20dB Boost. Morley Pedals. General Merchandise. Hal Leonard #MTMK2. Published by Hal Leonard (HL.326367).
Item Number: HL.326367
5x8 inches.
Our world-famous optical circuitry and switchless design are the heart of this guitar pedal and its buffer circuit prevents signal loss and maintains tone. Just right for pedal boards, you simply step on the pedal to engage the wah function, and step off to go to bypass. Features include: a MQ2 custom inductor, LED indication, cold-rolled steel housing, a quick clip battery door, a glow-in-the-dark treadle grip and a 1 year warranty.
Features include:
Switchless, optical wah with 20db boost
Buffer circuit prevents signal loss and maintains tone
6.85″ long x 4.5″ wide x 2.75″ high
Powers from one 9V battery or optional Morley adapter
MQ2 custom inductor, LED indication, cold-rolled steel housing, quick clip battery door, glow-in-the-dark treadle grip/toe-end logo
One-year warranty; lifetime warranty available with registration. |
|
| Morley Mark Tremonti Power Wah Pedal
Mark TREMONTI (CREED) vient de signer avec MORLEY un contrat qui fait mal ! Le résultat n...(+) Mark TREMONTI (CREED) vient de signer avec MORLEY un contrat qui fait mal ! Le résultat n'est autre que la Power Wah Signature TREMONTI, une pédale qui s'inscrit d'ores et déjà comme une référence en matière de wah-wah. La TREMONTI propose un boost pour accentuer le Wah, en plus des qualités communes aux autres Morley (cellule photo-électrique, régulateur de signal...) |
|
| MORLEY ABY-G Pour instruments : route une entrée vers deux sorties, ou deux entrées vers une sortie |
|
| MORLEY 20/20 POWER WAH VOLUME Combine une Wah et un volume, déclenchement par interrupeur au pied |
|