| Palmer : Pro RMMS 8
(9 comments)
- Low-noise- 8 Balanced XLR inputs- Each to a direct output and a transformer isolated out...(+) - Low-noise- 8 Balanced XLR inputs- Each to a direct output and a transformer isolated output- Combine 2 channels to double or sum the outputs- Ground lift per channel- Suitable for phantom-powered condenser microphones and DI boxes- A total of 16 XLR outputs- Dimensions: 19", 1 U- Case depth: 73 mm- Weight: 1.3 kg |
|
| Palmer : MI DMS
(57 comments)
- Suitable as a switch for communication with technicians, as a splitter for different mic...(+) - Suitable as a switch for communication with technicians, as a splitter for different microphone inputs and for different zones, and more- 1 XLR input- 2 XLR outputs- Foot switch - switches only when pressed- With Ground / Lift switch |
|
| Palmer : PPB 20 Press-Box
(1 comments)
Press Box- Audio distribution- Is used for press conferences to distribute 1 red microphon...(+) Press Box- Audio distribution- Is used for press conferences to distribute 1 red microphone to 20 send stations or recording devices galvanically separated- 2 x Inputs: XLR / f (one balanced input for microphone and line level, optionally switchable)- GND lift switch- Outputs: 20 XLR / m, transformer-balanced with GND-lift switch, Nominal output level: +4 dBu at 0 dB- Display of the LED chain- Maximum output level: +20 dBu- Nominal output impedance: 300-ohm- 2 x Stereo connector balanced / unbalanced, nominal level -10dBu- 2 x RCA jack unbalanced isolated / ungrounded, nominal level -10dBu- Headphone output- Power supply +/- 12VDC or 230VAC- Size: 19"/ 3U- 5 Years manufacturer's guarantee |
|
| Palmer : PPB 10
(1 comments)
- Audio distributor- Electrically isolated audio splitters e.g. for press conferences and ...(+) - Audio distributor- Electrically isolated audio splitters e.g. for press conferences and other applications- 1x XLR / f line in and 10x XLR / m out- GND lift switch per input and output- Adjustable input level with LED chain- Adjustable headphone output- Line bus input and output to cascade several devices- Design: 19", 1U- Integrated power supply- 5 Year warranty |
|
| Palmer : PRM-LS Line-Splitter
(10 comments)
Passive 4 channel line splitter- Nominal impedance 600 ohms- Max. input +20 dB- 19" / 1U- ...(+) Passive 4 channel line splitter- Nominal impedance 600 ohms- Max. input +20 dB- 19" / 1U- On the front of each channel: 1 Input + 1 thru (for phantom power transmission), 2x isolated outputs- 5 Year warranty |
|
| Palmer : PPB 20 S Press-Box Stereo
(3 comments)
- Press splitter 10 channel stereo / 20 channel mono- 2 Channels- Input level: +20 dB- 2 X...(+) - Press splitter 10 channel stereo / 20 channel mono- 2 Channels- Input level: +20 dB- 2 XLR inputs- Outputs: 6.3 mm jack, RCA, XLR, controls like attenuator- Ground lift- Input gain- Mic / line switch- Phones level, etc.- Powder coated steel- Internal shielded power supply- Dimensions (W x D x H): 480 x 200 x 135 mm- Weight: 9.09 kg |
|
| Palmer : PGA 03 Y-Box Guitar Splitter
(77 comments)
- Clinking input with 1 Mohm input impedance- Output AMP1 as parallel circuit- Output AMP2...(+) - Clinking input with 1 Mohm input impedance- Output AMP1 as parallel circuit- Output AMP2 is electronically converted with a subsequent transformer stage- Operation with 9V battery recommended- 5 years manufacturing guarantee |
|
| Palmer : Cable Tester
(119 comments)
Cable Tester- With LED error- indicator and battery indicator LED- Logical and unambiguous...(+) Cable Tester- With LED error- indicator and battery indicator LED- Logical and unambiguous LED indicator- XLR- 6.3 mm jack, unbalanced and balanced- Speaker twist- RCA- 5 pin DIN |
|
| Palmer : PMS-02 Mikrofon Splitter
(16 comments)
Microphone split box- 2-Channel splitter box 1" in 3"- Aluminium diecast housing- Per chan...(+) Microphone split box- 2-Channel splitter box 1" in 3"- Aluminium diecast housing- Per channel: One XLR input (female) parallel jack, XLR (male), two XLR outputs (male) via an isolating transformer 1: 1- Nominal level: 0 dB- Maximum level: +20 dB- Nominal impedance for inputs and outputs: 600 Ohm- Ground lift switch- Dimensions: 115 x 48 x 140 mm- Weight: 0.67 kg |
|
| Palmer : PMBLA
(3 comments)
- 2 Channel active summed e.g. 2 mixing consoles to 1 PA system- Adjustable output volume-...(+) - 2 Channel active summed e.g. 2 mixing consoles to 1 PA system- Adjustable output volume- Switchable pad- Mute and mono per channel- XLR / Combi input- XLR Input- XLR Output- Internal power supply- Format: 9.5"/ 1U- 5 Years manufacturer's guarantee |
|
| Palmer : PRM-MS Micro-Splitter
(6 comments)
Passive microphone splitter- 4 Channels- Nominal impedance of the inputs / outputs: 200 Oh...(+) Passive microphone splitter- 4 Channels- Nominal impedance of the inputs / outputs: 200 Ohm- Max. input: +6 dB- Format: 19" / 1U- On the front of each channel: One input, one parallel jack (output for looping phantom power), and two isolated transformer outputs- All outputs are also decoupled via resistors- 5 Year warranty |
|
| Palmer : Pro MCT DMX
(6 comments)
- Tests 3-pin and 5-pin DMX cables for continuity- Also suitable to test 3-pin XLR microph...(+) - Tests 3-pin and 5-pin DMX cables for continuity- Also suitable to test 3-pin XLR microphone cables- Automatic test or manual pin selection- LED display- Power supply: 2 X AA batteries (not included)- Dimensions: 240 x 48 x 53 mm- Weight: 0.7 kg- Incl. Mounting bracket |
|
| PALMER MCT DMX - TESTEUR DE CÂBLES DMX 3 POINTS ET 5 POINTS - TESTEUR DE CÂBLES DMX ET XLR 3 POINTS ...
Ce testeur de câbles permet de vérifier les câbles DMX 3 points et 5 points. Il offre un m...(+) Ce testeur de câbles permet de vérifier les câbles DMX 3 points et 5 points. Il offre un mode « tout automatique », mais permet aussi de travailler point par point. Deux rangées de LEDs de grande luminosité indiquent les continuités de liaison entre points. L appareil permet également de tester les câbles micro XLR 3 points. Le testeur de câble DMX est livré avec deux équerres de montage, offrant diverses possibilités de fixation. Test de continuités sur câbles DMX 3 points et 5 points Compatible avec le test de câbles micro XLR 3 points Test automatique ou choix manuel des points à vérifier Indicateurs LED Livré avec équerres de montage |
|
| Palmer Pro Ahmct 8 - Cable Tester
The AHMCT 8 tests the most critical cables on the stage itself and flags up whether they a...(+) The AHMCT 8 tests the most critical cables on the stage itself and flags up whether they are functioning or not, both visibly via LEDs and audibly via a buzzer. This makes it the perfect tool for engineers - both in the workshop and on stage. |
|
| PALMER AHMCTXL V2 - MULTITESTEUR DE CÂBLES
L'appareil professionnel AHMCTXL V2 entièrement équipé vous permet de tester rapidement et...(+) L'appareil professionnel AHMCTXL V2 entièrement équipé vous permet de tester rapidement et facilement les câbles audio, vidéo et informatiques les plus courants. Il dispose de deux modes de test, l'un automatique l'autre manuel, ainsi que de deux rangées de LED indiquant si les câbles sont bien affectés et si les informations y passent correctement. L'appareil AHMCTXL V2 permet de tester les câbles avec les types de connecteurs suivants : Speakon 4 broches et 8 broches, XLR 3 broches et 5 broches, jack mono et stéréo 3,5 mm et 6,35 mm, RCA, DIN/MIDI, USB, RJ-45 et S-Video. Il est fourni avec deux sondes permettant de détecter les problèmes de câbles avec d'autres types connecteurs ou encore les problèmes de câblage dans les studios et les installations. Le multitesteur de câbles compact AHMCTXL V2 est adapté aux utilisations professionnelles ou à domicile et est muni d'un boîtier robuste en acier avec revêtement thermolaqué pour une utilisation fiable et durable. Multitesteur de câbles pour 11 types de connecteurs XLR, jack mono et stéréo, Speakon, RCA, DIN/MIDI, USB, RJ-45, S-Video Modes de test automatique et manuel Rangées de voyants LED Avec deux sondes pour tester rapidement le passage des informations Boîtier compact en acier Alimenté par deux piles AA Housse protectrice comprise |
|
(Change geographical area)
ACCESSORIES - STUDIO/LIVE
