| Palmer : Macht 402 (132 comments)
Especially for electric guitar- Output Power: 2 x 200 W @ 4 Ohm, 2x 100W bridged @ 8 Ohm: ...(+) Especially for electric guitar- Output Power: 2 x 200 W @ 4 Ohm, 2x 100W bridged @ 8 Ohm: 1x 400W @ 8 Ohm- Class D dynamic circuit- Frequency range: 20 - 20,000 Hz- Protection: soft start, short-circuit, DC, overheating, overvoltage- Controls: on/ off, volume, high, low, mode (bridge/ parallel/ stereo), ground lift, limiter sensitivity- Line input: 2x XLR and 2x 6.3 mm jack- Speaker output: 2x speaker twist and 3x 6.3 mm jack- Dimensions (W x H x D): 482 x 44 x 244 mm |
|
| Palmer Mi : Cab 212 X Unloaded (7 comments)
Closed cabinet construction- Housing material: Pressboard- Baffle material: MDF- Front cov...(+) Closed cabinet construction- Housing material: Pressboard- Baffle material: MDF- Front covering: Fabric- Frontloaded- Handles on the side- Input and output: 6.3 mm jack- Dimensions: (W x H x D): 710 x 480 x 295 mm- Weight: 14 kg- Colour: Black |
|
| Palmer : CAB 112/Fat 50 Cover (103 comments)
Suitable for Palmer 1x 12" cabinets and Palmer Fat 50 1x 12" combo- Material: Nylon- Dimen...(+) Suitable for Palmer 1x 12" cabinets and Palmer Fat 50 1x 12" combo- Material: Nylon- Dimensions (W x D x H): 580 x 290 x 450 mm- Weight: 200 g- Colour: Black |
|
| Palmer : PDI-06-16 Ohm (49 comments)
Format: 9.5''/ 1 RU- Adjustable in 6 steps (100%, 70%, 50%, 35%, 25%, 18%)- Reduces the vo...(+) Format: 9.5''/ 1 RU- Adjustable in 6 steps (100%, 70%, 50%, 35%, 25%, 18%)- Reduces the volume of a guitar speaker at full saturation of the tubes- Made for 16 Ohm loudspeakers- Bypass/ attenuator switch for fast switching between full and reduced output power- Input: 1x 6.3 mm jack socket- Output for loudspeaker 1x 6.3 mm jack socket in parallel- Output impedance: 16 Ohm |
|
| Palmer : PDI-06-8 Ohm (54 comments)
Adjustable in 6 steps (100%, 70%, 50%, 35%, 25%, 18%)- Reduces the volume of a guitar spea...(+) Adjustable in 6 steps (100%, 70%, 50%, 35%, 25%, 18%)- Reduces the volume of a guitar speaker at full saturation of the tubes- Made for 8 Ohm or 2x 16 Ohm loudspeakers- Bypass/ attenuator switch for fast switching between full and reduced output power- Input: 1x 6.3 mm jack socket- Output for loudspeaker 2x 6.3 mm jack socket in parallel- Output impedance: 8 Ohm |
|
| Palmer : Tino (25 comments)
Switching system 2 amps to 1 cabinet with remote input- 1 Instrument input: 6.3 mm jack- 2...(+) Switching system 2 amps to 1 cabinet with remote input- 1 Instrument input: 6.3 mm jack- 2 Outputs to the amp: 6.3 mm jack- 2 Outputs to speaker: 6.3 mm jack- Switchable GND / lift per channel- Toggle switch- Remote control connection for foot switch: 6.3 mm jack- External 9 V power supply with 130 mA- Input Impedance: 10 Mohm- Output Impedance: 10 kOhm- Dimensions: 222 x 44 x 175 mm |
|
| Palmer : MI CAB CASTORS (170 comments)
With screws for bass and guitar speaker cabinets- 2 Swivel castors- 2 Swivel castors with ...(+) With screws for bass and guitar speaker cabinets- 2 Swivel castors- 2 Swivel castors with brake- Wheel diameter: 50 mm- Height: 72 mm- Load capacity per set: 120 kg- Mounting holes diameter: 6.5 mm- Hole spacing: 45 mm- Width of tread: 16 mm- Base plate dimensions: 50 x 50 x 2 mm- Includes 16 black 19 mm flathead screws |
|
| Palmer : CAB M Merger (242 comments)2 Inputs- 2 Outputs- Boxes can be connected in series or parallel |
|
| Palmer Mi : Cab 212 X V30
Speakers: 2 x Celestion Vintage 30- Power rating mono: 120 W, stereo: 2 x 60 W- Impedance ...(+) Speakers: 2 x Celestion Vintage 30- Power rating mono: 120 W, stereo: 2 x 60 W- Impedance mono: 8 Ohm, stereo: 16 Ohm- Input and output: 6.3 mm jack each- Housing construction: Closed- Front loaded- Cabinet material: Pressboard- Baffle material: MDF- Front covering: Fabric- Side handles- Dimensions: (W x H x D): 710 x 480 x 295 mm- Weight: 23 kg- Colour: Black |
|
| Palmer : Pocket Amp MK2 Guitar Preamp (184 comments)
MK 2 - Completely revised version- Offers an extended range of all "official" tube amp sou...(+) MK 2 - Completely revised version- Offers an extended range of all "official" tube amp sounds -from absolutely clean to extremely high gain- Three-way switch for amplifier characteristics- Gain Mode and Microphone Position- Control: Gain, Volume, Treble and Bass- Ground Lift switch- Connectors: Jack input, headphone, XLR DI out, headphone output and AUX in- Aluminium diecast housing- Powered with 9V batteries or 9V DC power supply (not included - e.g. Article Nr 409939) |
|
| Palmer : Duetto (36 comments)
A mixer in its smallest possible format- Inputs are designed specifically for electric gui...(+) A mixer in its smallest possible format- Inputs are designed specifically for electric guitars in level and impedance- But of course they work just as well with other instruments and devices that supply line levels- Makes it possible to input two sources and to actively mix them together on a common amplifier input- Inputs: 2 x unbalanced 6.3 mm jack- Input impedance: 1 M Ohm- Max. Input Level: 1.55 V (+6 dBu)- Output: 1x unbalanced 6.3 mm jack- Output impedance: 10 k Ohm- Amplification: max. X "2" (6 dB)- Power supply via 9V battery (417473) or external 9V power supply (409939) (both optional) |
|
| Palmer Mi Protective Cover For Palmer 1 X12 Cabinets Protective Cover for Palmer 1 x12 Cabinets |
|