| Showtec : NET-2/3 Pocket (68 comments)
Network: RJ45- DMX: 2 x XLR 3-pin- Supported protocols: ArtNET, sACN, TCP / IPv4, DMX-512A...(+) Network: RJ45- DMX: 2 x XLR 3-pin- Supported protocols: ArtNET, sACN, TCP / IPv4, DMX-512A- Dimensions: 67 x 115 x 44 mm- Power supply: 12 V DC, 500 mA (mains adapter included)- Power consumption: max. 6 W- Operating temperature: 0 to + 40° C- Weight: 335 g |
|
| Showtec : DB-1-8 DMX Booster / Splitter (248 comments)
Inputs: 3-Pin and 5-pin XLR sockets- Outputs: 3-Pin XLR sockets- Power input: 100V - 240V ...(+) Inputs: 3-Pin and 5-pin XLR sockets- Outputs: 3-Pin XLR sockets- Power input: 100V - 240V 50/60Hz- Dimensions (L x W x H): 483 x 134 x 46 mm- Weight: 2.6 kg |
|
| Showtec : NET-2/5 Pocket (41 comments)
Network: RJ45- DMX: 2 x XLR 5-pin- Supported protocols: ArtNET, sACN, TCP / IPv4, DMX-512A...(+) Network: RJ45- DMX: 2 x XLR 5-pin- Supported protocols: ArtNET, sACN, TCP / IPv4, DMX-512A- Dimensions: 67 x 115 x 44 mm- Power supply: 12 V DC, 500 mA (mains adapter included)- Power consumption: max. 6 W- Operating temperature: 0 to + 40° C- Weight: 335 g |
|
| Showtec : DR Pro Rack (6 comments)
LCD colour display with 128 x 160 pixels- 8 storage locations for scenes, chases or shows-...(+) LCD colour display with 128 x 160 pixels- 8 storage locations for scenes, chases or shows- Manual control- Real time trigger- SMPTE / MIDI timer release- DMX trigger and DMX monitor- Storage space for 5 hours of recording- 4 Shooting modes: Manual, Auto, Semi-Auto- Power supply: DC 9 ~ 12 V- Power consumption: 6 W- Data signal: DMX / MIDI / SMPTE- DMX connectors: 3-pin XLR- User mode: Auto, manual- SMPTE mode: Event trigger- SMPTE connector: XLR 3-pol.- Dimensions: 482 x 78 x 44 mm- Weight: 1.1 kg |
|
| Showtec : RP-405 MKII Relay Pack
Each channel is patchable- Can be controlled via DMX or sound- Pattern speed can be set be...(+) Each channel is patchable- Can be controlled via DMX or sound- Pattern speed can be set between 20 seconds and 2 minutes per step- Suitable for small events where no external controller is required- Power input: 240 V / 50 Hz- Output: 4x 240V / 5A- Built-in patterns- DMX-512- Sound control- Master / Slave |
|
| Showtec : Booster Pro 2-8 DMX/RDM 5-pin (2 comments)
RDM-capable DMX splitter for up to two universes- Two inputs can be assigned freely to 8 o...(+) RDM-capable DMX splitter for up to two universes- Two inputs can be assigned freely to 8 optically isolated outputs- Real-time monitoring DMX- Adjustable DMX timing- OLED display for recall functions- 2 DMX inputs: XLR 5-pin- 5 DMX outputs: XLR 5-pin- Power input: Power Twist- Dimensions: 483 x 140 x 46 mm- Weight: 3.4 kg |
|
| Showtec : Booster Pro 2-8 DMX/RDM 3-pin (4 comments)
RDM-capable DMX splitter for up to two universes- Two inputs can be assigned freely to 8 o...(+) RDM-capable DMX splitter for up to two universes- Two inputs can be assigned freely to 8 optically isolated outputs- Real-time monitoring DMX- Adjustable DMX timing- OLED display for recalling functions- 2 DMX inputs: XLR 3-pin- 8 DMX outputs: XLR 3-pin- Power input: Power Twist- Dimensions: 483 x 140 x 46 mm- Weight: 3.4 kg |
|
| Showtec : DJ Switch 10-F
10 Safety plugs on the back- 5 A per channel- 15 A maximum load- Fuses on the front- Width...(+) 10 Safety plugs on the back- 5 A per channel- 15 A maximum load- Fuses on the front- Width: 19"- Height: 3 U- Dimensions: 482 x 135 x 120 mm- Weight: 2.10 kg |
|
| Showtec : DB-1-8/RDM Booster / Splitter (9 comments)
Supports the Remote Device Management Protocol (RDM)- Inputs and outputs electrically isol...(+) Supports the Remote Device Management Protocol (RDM)- Inputs and outputs electrically isolated- DMX indicator LEDs on the inputs and outputs- Inputs: 3-pin and 5-pin XLR connector- Outputs: 3-pin XLR socket- Power input: 100 - 240 VAC / 50/60 Hz- 19" housing- Dimensions (L x W x H): 483 x 134 x 46 mm- Weight: 2.6 kg |
|
| Showtec : Single WDP-1 Dim./Switch 10A (5 comments)
Manually adjustable via a 50 mm fader or via DMX512 or W-DMX- Suitable for wall and truss ...(+) Manually adjustable via a 50 mm fader or via DMX512 or W-DMX- Suitable for wall and truss mounting- Compatible with Wireless Solutions wireless technology- Power supply: 230 VAC - 50 Hz- Output power: max. 2.3 kW / 10 A- DMX connector: 3-pin XLR- In / Output- Number of DMX channels: 1- Dimensions: 95 x 105 x 90 mm- Weight: 1.38 kg |
|
| Showtec : NET-8/5 (8 comments)
Network router that can convert artnet to DMX-512 signals and vice versa- A maximum of 409...(+) Network router that can convert artnet to DMX-512 signals and vice versa- A maximum of 4096 channels can be transmitted using a single CAT5 cable- Embedded network switch enabling it to be used as a ethernet repeater- 8 Isolated DMX-512 universes, which can be used as input or output- All settings can be made with the graphical display and buttons on the front panel- 1 Gbps data transfer- High-speed network at the input and output- Network: 2x RJ45- DMX: 8x XLR, 5-pin- Power: Power twist input- Supported Protocols: ArtNET, KlingNET, TCP/IP v4, DMX-512A- Power supply: 100 - 240 VAC 50/ 60 Hz- Power consumption: 20 W- Dimensions: 482 x 205 x 44 mm- Weight: 1.8 kg |
|
| Showtec : DB-1-4 DMX Booster / Splitter (96 comments)
Universal optical DMX-512 splitter- Distributes the incoming DMX signal into daisy chain c...(+) Universal optical DMX-512 splitter- Distributes the incoming DMX signal into daisy chain configurations in four separate outputs with an additional "thru" port- For easy connection the DB-1-4 has 3-pin and 5-pin XLR connectors- The device can be installed into any 19" housing or via the M10 mount clamp on the back of the device- The light controller has distinct LEDs to display the DMX signal status of each output and input- 1x Input, 4x outputs: 3-pin and 5-pin- An additional thru output: 3-pin and 5-pin (for connecting to other data streams)- Electrical isolation between in- and output- Format: 19" / 1U- AC Power: Auto-switching 100 V - 240V 50/60Hz- Dimensions (LxWxH): 483 x 134 x 46 mm- Weight: 2.6 kg |
|
| Showtec : Lightbrick 4 Ch. Dimm Pack DMX (30 comments)
Easy to use 4-channel light control with integrated power amplifier- DMX 512 controllable ...(+) Easy to use 4-channel light control with integrated power amplifier- DMX 512 controllable 4-channel dimmer and switch pack- Ideal for permanent installations or for mobile use- Includes 1 m cable with earthed plug- 4-Channel dimmer or switch pack- DMX 512 controllable- Individually adjustable DMX addresses on each channel (output)- Controlling- DMX-512- Internal preprogrammed chasers with 16 different patterns- Pre-heat function (0-25%)- Adjustable fade time- Max. dim setting- Manual program- Car program- Sound-to-light- AC 230V / 50 Hz max. 5A / ch (CE 4x 1.5 A)- Dimensions (L x W x H): 330 x 150 x 115 mm- Weight: 2.98 kg |
|
| Showtec : NET-8/3 (7 comments)
Network router that can convert artnet to DMX-512 signals and vice versa- A maximum of 409...(+) Network router that can convert artnet to DMX-512 signals and vice versa- A maximum of 4096 channels can be transmitted using a single CAT5 cable- Embedded network switch enabling it to be used as a ethernet repeater- 8 Isolated DMX-512 universes, which can be used as input or output- All settings can be made with the graphical display and buttons on the front panel- 1 Gbps data transfer- High-speed network at the input and output- Network: 2 x RJ45- DMX: 8 x XLR, 3-pin- Power: Power twist input- Supported Protocols: ArtNET, KlingNET, TCP/IP v4, DMX-512A- Power supply: 100 - 240 VAC 50/ 60 Hz- Power consumption: 20 W- Dimensions: 482 x 205 x 44 mm- Weight: 1.8 kg |
|
| Showtec : DIM-4 4-Ch. Dimmer/Switcher (20 comments)
4 Channels, each protected with 3A- Can be operated on any power socket- Input voltage: 23...(+) 4 Channels, each protected with 3A- Can be operated on any power socket- Input voltage: 230 V / 50 Hz- Output: 3 A/Ch- Total: 8 A- Controlling: DMX-512, stand-alone, music control- DMX channels: 1.2 or 4- Mode: Dim or Switch- Data in/out: XLR 3-pin- Power supply: Earthed plug- Dimensions (L x W x H): 220 x 82 x 275 mm- Weight: 3.5 kg |
|
| Showtec : Truss Booster RDM 1-6 5Pol
Compact solution for splitting and amplifying DMX or RDM signals- Mounting on trusses or t...(+) Compact solution for splitting and amplifying DMX or RDM signals- Mounting on trusses or tubes is via the bracket or via Velcro straps that can be pulled through the 4 slots- A rubber ring on both sides of the sturdy housing makes the booster ideal for mobile applications- Small design for easy truss mounting- DMX / RDM splitter for 6 outputs- Power twist in / out- Supports Remote Device Management (RDM) protocol- Inputs: 5-pin XLR connector- Outputs: 6x 5-pin XLR socket / 1x 5-pin XLR Thru socket- Power supply input: 100 - 240 VAC, 50/60 Hz- Dimensions (L x W x H): 280 x 175 x 210 mm- Weight: 2 kg |
|
| Showtec : DB-1-4/RDM Booster / Splitter (13 comments)
Supports the Remote Device Management Protocol (RDM)- Inputs and outputs electrically isol...(+) Supports the Remote Device Management Protocol (RDM)- Inputs and outputs electrically isolated- DMX display LEDs at the inputs and outputs- Inputs: 3-pin and 5-pin XLR connector- Outputs: 3-pin and 5-pin XLR socket- Power input: 100 - 240 VAC / 50/60 Hz- 19" housing- Dimensions (L x W x H): 483 x 134 x 46 mm- Weight: 2.6 kg |
|
| Showtec : DMX Merge (3 comments)
Showtec DMX Merge; The device has 4 modes: HTP / Back-up mode / Merge mode / LTP; DMX inpu...(+) Showtec DMX Merge; The device has 4 modes: HTP / Back-up mode / Merge mode / LTP; DMX input: 3-pin XLR (male) 2x on the front and 2x on the back; DMX output: 3-pin XLR (female) 1x on the front and 1x on the back; Dimensions: 482 x 73 x 44 mm (LxWxH); Weight: 1.15kg; |
|
| Showtec : Showmaster 48 MKII
Showtec Showmaster 48 MKII; Light mixing console that can be operated on 2 levels with 24 ...(+) Showtec Showmaster 48 MKII; Light mixing console that can be operated on 2 levels with 24 threads each or 1 level and 48 threads. It can be used for DMX devices and also with the MIDI protocol for real-time programming. 96 scenes or chases with up to 999 steps or a loop with a total of 23976 steps can be programmed. Control Mode: Manual, MIDI, Sound; DMX channels: 48; buttons: 80; chases: 96; Faders: 53; Power supply: 12VDC; power consumption: 6 W; Power input connector: low voltage DC connector; DMX connection: XLR 3pin; Length (mm): 710mm; Width (mm): 267mm; Height (mm): 90mm; Weight: 6.2kg; Height units: 6 U; |
|
| Showtec : Multi Exchanger (9 comments)
72 analog channels - 3x D-sub 25 pin.- Analogue signal selectable: + (-) 10 V, + (-) 12 V ...(+) 72 analog channels - 3x D-sub 25 pin.- Analogue signal selectable: + (-) 10 V, + (-) 12 V and + (-) 15 V- Hold function: Scene stops when the DMX signal stops- Scenes can be saved- Chase function with speed control- Format: 19"/ 1U- Dimensions (L x W x H): 483 x 130 x 45 mm- Weight: 1.65 kg |
|