| Swisson : XMT-500 DMX Tester
|
|
| Swisson : XPD-28-5R RDM and DMX-Splitter (1 comments)
Distributes and amplifies DMX signals from two inputs to eight outputs- This allows the 32...(+) Distributes and amplifies DMX signals from two inputs to eight outputs- This allows the 32-fixture limit of the DMX standard to be easily overcome and enables star topologies to be created.- Can also be used as a repeater to cover longer distances- Ten output modes to ensure that the relayed signals are always recognised by the connected devices- 2 Failure-Behaviours- RDM-capable (bidirectional)- Optically isolated- Despite its rich feature set, the XPD-28 remains easy to operate via an encoder and eleven additional push-buttons- Signal distribution: 2x DMX/RDM in (5-pin) to 8x DMX/RDM out (5-pin).- Protocol: DMX 512 / RDM- Power supply: 110 - 240 V / 50/60 Hz- Power connection: Power Twist- Format: 19" / 1 U- Dimensions (W x D x H): 482 x 111 x 45 mm- Weight: 1.7 kg |
|
| Swisson : XND-8R5 ENode 19" 8 Port 5-pol
Converts Art-Net and sACN to DMX for up to 8 independent universes- Art-Net I, II and 3 (D...(+) Converts Art-Net and sACN to DMX for up to 8 independent universes- Art-Net I, II and 3 (DMX and RDM)- sACN release- and draft version- Up to 8 individual optically isolated DMX outputs- Graphic display and encoder for easy configuration and clear display of precise status information- Quick access button for each DMX output port allows direct setting of the Art-Net or sACN universe- Neutrik Power Twist input and output- Internal universal power supply- Signal distribution: 1 x Art-Net in (RJ45 / Ethercon), 8 x DMX outputs (5-pin)- Protocol: ArtNet I, II, III- Voltage: 100 V - 240V, 50/60 Hz- Material: metal- Weight: 1.5 kg- Dimensions (W x D x H): 482 (19") x 136 x 44.5 mm- - Colour: Red / Black |
|
| Swisson : XSP-5B DMX-Splitter Box (1 comments)
Swisson XSP-5B DMX splitter BOX; 5-pin in / out, 5 x 5pol. out; professional DMX splitter ...(+) Swisson XSP-5B DMX splitter BOX; 5-pin in / out, 5 x 5pol. out; professional DMX splitter with optically isolated ports; the DMX signal is regenerated and amplified without changing the DMX protocol timing; Reduces reflection problems; Signal error display; switchable terminating resistor; 1x DMX in (5-pin) to 5 x DMX out (5-pin) + thru (5-pin); Weight: 0.75 kg; Dimensions: 215 x 111 x 45 mm (WxDxH); Type: DMX splitter for truss mounting; Metal case; Connection via fixed cable with open ends; Voltage: 100-240V, 50 / 60Hz; internal power supply: |
|
| Swisson : XND-4R5 ENode 19" 4 Port 5-pol (1 comments)
Converts Art-Net and sACN to DMX for up to 4 independent universes- Art-Net I, II and 3 (D...(+) Converts Art-Net and sACN to DMX for up to 4 independent universes- Art-Net I, II and 3 (DMX and RDM)- sACN release and draft version- Up to 8 individually optically isolated DMX outputs- Graphic display and encoder for easy configuration and clear display of precise status information- Quick access button for each DMX output port allows direct setting of the Art-Net or sACN universe- Power twist input and output- Internal universal power supply- Signal distribution: 1 x Art-Net in (RJ45 / etherCON), 4 x DMX outputs (5-pin)- Protocol: ArtNet I, II, III- Voltage: 100 - 240 V, 50/60 Hz- Material: metal- Weight: 1.5 kg- Dimensions (W x D x H): 482 (19") x 133.5 x 44.5 mm- Colour: Red / Black |
|
| Swisson : XSP-3B DMX-Splitter Box
Swisson XSP-3B DMX splitter BOX; 3-pin in / out, 5 x 3pol. out; professional DMX splitter ...(+) Swisson XSP-3B DMX splitter BOX; 3-pin in / out, 5 x 3pol. out; professional DMX splitter with optically isolated ports; the DMX signal is regenerated and amplified without changing the DMX protocol timing; Reduces reflection problems; Signal error display; switchable terminating resistor; 1x DMX in (3-pin) to 5 x DMX out (3-pin) + thru (3-pin); Weight: 0.75 kg; Dimensions: 215 x 111 x 45 mm (WxDxH); Type: DMX splitter for truss mounting; Metal case; Connection via fixed cable with open ends; Voltage: 100-240V, 50 / 60Hz; internal power supply: |
|
| Swisson : XND-8R8 ENode 19" 8 Port RJ45
Converts Art-Net and sACN to DMX for up to 8 independent universes- Art-Net I, II and 3 (D...(+) Converts Art-Net and sACN to DMX for up to 8 independent universes- Art-Net I, II and 3 (DMX and RDM)- sACN release- and draft version- Up to 8 individually optically isolated DMX outputs- Graphic display and encoder for easy configuration and clear display of precise status information- Quick access button for each DMX output port allows direct setting of the Art-Net or sACN universe- Neutrik Power Twist input and output- Internal universal power supply- Signal distribution: 1 x Art-Net input (RJ45 / Ethercon), 8 x DMX outputs (RJ45)- Voltage: 100 V - 240 V, 50/60 Hz- Protocol: ArtNet I, II, III- Material: metal- Dimensions (W x D x H): 482 (19") x 136 x 44.5 mm- Weight: 1.5 kg- Colour: Red / Black |
|
| Swisson : XND-8R3 ENode 19" 8 Port 3-pol
Art-Net I, >II and 3 (DMX and RDM)- sACN release and draft version- Up to 8 individually o...(+) Art-Net I, >II and 3 (DMX and RDM)- sACN release and draft version- Up to 8 individually optically isolated DMX outputs- Graphic display and encoder for easy configuration and display of precise status information- Quick access button for each DMX output port allows direct setting of the Art-Net or sACN universe- Neutrik PowerTwist input and output- Universal power supply- Colour: Red/black- Signal distribution: 1 x ArtNet in (RJ45/EtherCon), 8 x DMX out (3-pin).- Type: converter from ArtNet to DMX- Power supply: Internal- Material: Metal- Weight: 1.5 kg- Voltage: 100 - 240 V, 50/60Hz- Protocol: ArtNet I, II, III- Dimensions (W x D x H): 482 (19") x 136 x 44.5 mm |
|
| Swisson : XSH-3BR-1P4 (Box) RDM Hybrid S
Swisson XSH-3BR-1P4 (Box) RDM Hybrid Splitter; for truss mounting; simultaneous distributi...(+) Swisson XSH-3BR-1P4 (Box) RDM Hybrid Splitter; for truss mounting; simultaneous distribution of the DMX signal and the power supply using XLR and PowerTwist; Current measurement (0 - 20 A); Amplifies and regenerates the DMX signal; reduces reflection problems; RDM; 19" rack mounting kit (optional); Signal distribution: 1x DMX in (3-pin) to 4 x DMX out (3-pin); Power connection: 1x PowerTwist In, 4 x PowerTwist Out; Voltage: 100 - 240V, 50/60Hz; Power consumption: 4 watts; Dimensions (WxDxH): 302 x 114 x 45 mm; Weight: 1.4 kg; Note: A power cable/power plug is not included! |
|
| Swisson : XSH-5BR-1P4 (Box) RDM Hybrid S
For truss mounting- Simultaneous distribution of DMX signal and power supply via XLR- and ...(+) For truss mounting- Simultaneous distribution of DMX signal and power supply via XLR- and PowerTwist- Power measuring (0 - 20 A)- Amplifies and regenerates the DMX signal- Reduces reflection problems- RDM- 19" Rack mount kit available (not included)- Signal distribution: 1x DMX in (5-pin) to 4 x DMX out (5-pin)- Power connection: 1x PowerTwist In, 4x PowerTwist Out- Voltage: 100 - 240V, 50/60Hz- Power consumption: 4 watts- Dimensions (W x D x H): 302 x 114 x 45 mm- Weight: 1.4 kg |
|