| Thomann : Amp Stand
Foldable and tiltable- Stable support for guitar amps, bass amps and cabinets- Ideal tilta...(+) Foldable and tiltable- Stable support for guitar amps, bass amps and cabinets- Ideal tiltable back construction for stage, studio, rehearsal room and touring- Sturdy steel frame with foam padding and rubber feet- Folds flat and compact for easy transport and storage- No tools required- Maximum load capacity: 50 kg- Dimensions when folded (H x W): 64.5 x 35.2 cm- Dimensions when unfolded (W x D x H): 35 x 3.2 x 65 cm- Weight 1.7 kg |
|
| Thomann : Cover Engl Standard Head (223 comments)
For Engl Fireball 100, Fireball 60, Powerball, Blackmore- Made of high-quality water resis...(+) For Engl Fireball 100, Fireball 60, Powerball, Blackmore- Made of high-quality water resistant nylon- Manufactured in Germany |
|
| Thomann : Cover Marshall DSL40C
Suitable for Marshall DSL40C- Made of high-quality water resistant nylon- Manufactured in ...(+) Suitable for Marshall DSL40C- Made of high-quality water resistant nylon- Manufactured in Germany |
|
| Thomann : Harp Gear Set 2
Bugera V5 Infinium All-tube guitar combo-
Power: 5 W-
Power switchable between 5 W, 1 W ...(+) Bugera V5 Infinium All-tube guitar combo-
Power: 5 W-
Power switchable between 5 W, 1 W and 0.1 W-
1 Channel-
Components: 1x 8" Turbosound speaker-
1 Preamp tube 12AX7-
1 Power tube EL84-
Controls: Gain, Tone, Volume, Reverb-
4 Ohm speaker output-
Headphone output Shure 520 DX Dynamic Microphone "Bicycle Light"The 520DX "Green Bullet" continues the tradition of the 520D, which is famous among harmonica players for its classic Blues Harp sound. With its handy size and contoured shape, it fits perfectly between the harmonica and the hand. Hohner FlexCase M Ideal for picking up harmonica-
Omnidirectional polar pattern-
Volume control to adapt to any musical situation-
Frequency range: 100 - 5,000 Hz-
94 dB SPL-
Noise Sensitivity: -38.0 dBV / Pa (13 mV)-
Dimensions: 63 x 82.6 mm-
Weight including cable: 737 g-
Includes 6 m connection cable unbalanced 6.3 mm jack |
|
| Thomann : Cover HB 212 / 212 Vintage (84 comments)
Suitable for Harley Benton G212 and G212V- High-quality water resistant nylon fabric- Manu...(+) Suitable for Harley Benton G212 and G212V- High-quality water resistant nylon fabric- Manufactured in Germany |
|
| Thomann : Tilt Stand (47 comments)
For setting a direct beam angle from the amp on the floor- Rubberised rail on the bottom- ...(+) For setting a direct beam angle from the amp on the floor- Rubberised rail on the bottom- Dimensions (W x H x D): approx. 32 x 13 x 30 cm- Colour: Black |
|
| Thomann : Cover Pro HBAC PRO 60 Suitable for Harley Benton AC PRO 60- High-quality waterproof nylon- Made in Germany |
|
| Thomann : Cover Bugera V22/V22 Infinium (119 comments)
Suitable for the Bugera V22 and V22 Infinium Combo- Water resistant high quality nylon- Di...(+) Suitable for the Bugera V22 and V22 Infinium Combo- Water resistant high quality nylon- Dimensions (W x H x D): 572 x 453 x 270 mm- Made in Germany |
|
| Thomann : Cover HB-80R (41 comments)
Suitable for Harley Benton HB-80R guitar combo- Made of water repellent and very high qual...(+) Suitable for Harley Benton HB-80R guitar combo- Made of water repellent and very high quality nylon fabric- Dimensions (W x H x D): 52.5 x 44.5 x 26.5 cm- Made in Germany |
|
| Thomann : USB Stick Kemper (102 comments)
More than 130 official amp sounds for Kemper on USB stick- Made in a professional recordin...(+) More than 130 official amp sounds for Kemper on USB stick- Made in a professional recording studio- To use only with a Kemper amp |
|
| Thomann : Cover Bugera V5/V5 Infinium (99 comments)
Suitable for Bugera V5 and V5 Infinium- Water resistant high quality nylon- Measurements (...(+) Suitable for Bugera V5 and V5 Infinium- Water resistant high quality nylon- Measurements (W x H x D): 35 x 37.5 x 21.5 cm- Made in Germany |
|
| Thomann : TAD Casters Set
For amplifiers (amplifier casters)- Suitable for Fender- Package contents: 4 pieces- Inclu...(+) For amplifiers (amplifier casters)- Suitable for Fender- Package contents: 4 pieces- Includes flange and mounting material |
|
| Thomann : Battery 12V 7,2Ah
Fits HBAC-30, Phil Jones Briefcase, db Opera 110 Mobile, Samson XP40i- 12 V / 7.2 Ah- Dime...(+) Fits HBAC-30, Phil Jones Briefcase, db Opera 110 Mobile, Samson XP40i- 12 V / 7.2 Ah- Dimensions (L x W x H): 151 x 65 x 98 mm |
|
| Thomann : Cover Vox AC15 C1 (122 comments)
Suitable for Vox AC15 C1- Made of high-quality water resistant nylon- Manufactured in Germ...(+) Suitable for Vox AC15 C1- Made of high-quality water resistant nylon- Manufactured in Germany |
|
| Thomann : SW1045 latched Footswitch (108 comments)
Metal- With 6 solder lugs- Side connections- Max. 250V, 2A- Installation diameter: 12 mm- ...(+) Metal- With 6 solder lugs- Side connections- Max. 250V, 2A- Installation diameter: 12 mm- Case dimensions: 17 x 14 x 20 mm- Shaft length: 14 mm- Total height: 44 mm |
|
| Thomann : SW1045PC Footswitch (91 comments)
Suitable for many Marshall base boards- PCB mounting- Material: Metal- With 6 solder pins-...(+) Suitable for many Marshall base boards- PCB mounting- Material: Metal- With 6 solder pins- Max. 250V, 2A- Installation diameter: 12 mm- Case dimensions: 17 x 14 x 20 mm- Shaft length: 14 mm |
|
| Thomann : Kemper Head Bag
3 External pockets- 1 Internal pocket in the lid- With handles and shoulder strap- Interna...(+) 3 External pockets- 1 Internal pocket in the lid- With handles and shoulder strap- Internal dimensions (W x H x D): 38 x 22 x 17.5 cm- Colour: Black |
|