| Thon : Inlay 2/2 ew Series (42 comments)
Suitable for a 2U rack with a fully extendable pullout drawer or a Thon inlay system case-...(+) Suitable for a 2U rack with a fully extendable pullout drawer or a Thon inlay system case- For 2 x Sennheiser handheld transmitters / pocket transmitter from the ew Series with E935 / 945 / 965 capsule- Dual-coloured foam: black / red- Accessory compartment- Milled compartment for replacement batteries- Dimensions (WxDxH): 405 x 375 x 60 mm- Made in Germany |
|
| Thon : Inlay 2/2 Shure QLXD/ULXD (34 comments)
Suitable for 2 U rack with full pullout drawers or Thon inlay system case- For 2 Shure han...(+) Suitable for 2 U rack with full pullout drawers or Thon inlay system case- For 2 Shure handheld transmitter/ belt pack ULXD1, ULXD2, QLXD2 / QLXD1 with SM58/ 86/ Beta58/ 87 capsule- Foam in two colours black/ red- Accessory compartment- Milled compartment for replacement batteries- Dimensions (WxDxH): 405 x 375 x 60 mm- Made in Germany |
|
| Thon : Inlay 0/6 ew Series (23 comments)
Suitable for a 2U rack drawer with a fully-extendable pullout drawer or a Thon inlay syste...(+) Suitable for a 2U rack drawer with a fully-extendable pullout drawer or a Thon inlay system case- Suitable for 6 x Sennheiser handheld transmitters from the ew series- Dual-colour foam: Black /Red- 1 x Accessory compartments- Milled compartment for spare batteries- Dimensions (WxDxH): 405 x 375 x 60 mm- Made in Germany |
|
| Thon : Inlay 8/8 ew Series
Suitable for 2 U rack with pullout drawers or Thon inlay system case- For 8 Sennheiser ew-...(+) Suitable for 2 U rack with pullout drawers or Thon inlay system case- For 8 Sennheiser ew-series IEM bodypacks and 8 inEars- Foam in two colours: Black/ Red- Milled compartment for spare batteries- Dimensions (WxDxH): 405 x 375 x 60 mm- Made in Germany |
|
| Thon : Wireless-Systems Case 2U (107 comments)
For handheld transmitters, bodypack transmitters and 19" receivers- 2 U Usable height- 25 ...(+) For handheld transmitters, bodypack transmitters and 19" receivers- 2 U Usable height- 25 cm Installation depth- Material: 7 mm plywood- Stepless rack rails front and rear- 22 x 22 mm and 25 x 25 mm aluminium profile- 4 Drawbolts- 1 Steel strap handle- 4 Large rubber feet- Small steel ball corners- 28 cm Body depth- Padded accessory compartment in the rear lid, internal dimensions (W x H x D): 44 x 8 x 13 cm- External dimensions (W x H x D): 53.5 x 14.5 x 51 cm- Weight: 7 kg- Colour: Phenol Brown- Includes fixing material- Made in Germany |
|
| Thon : Inlay 0/12 Univ Pockettr. (23 comments)
Suitable for 2 U rack with pullout drawers or Thon inlay system case- For 12 handheld tran...(+) Suitable for 2 U rack with pullout drawers or Thon inlay system case- For 12 handheld transmitters- Foam in two colours black/ red- Accessory compartment- Milled compartment for handheld transmitter (W x D x H): approx. 118 x 31 x 50 mm- Dimensions (WxDxH): 405 x 375 x 60 mm- Made in Germany |
|
| Thon : Case t.bone Speech 100M 16xC/D
Suitable for t.bone Speech 100M Conference System- With detachable 2 U rack for the contro...(+) Suitable for t.bone Speech 100M Conference System- With detachable 2 U rack for the control unit- Detachable tray with 4 foam inlays for the microphone units (16 delegates or president) and microphones- Space for cables and accessories- Material: 6.8 mm phenolic resin-coated plywood- 30 x 30 mm Aluminium edges- 4 Medium butterfly latches- 4 Medium folding handles- 4 Medium ball corners- 4 Medium ball corners with L-corner- 4 Swivel castors, 2 of which have brakes- Foam padding- Accessory compartment- External dimensions (W x D x H): Approximately 705 x 595 x 782 mm- Weight: 33.8 kg- Colour: Brown- Made in Germany- Suitable extension modules (not included): Article no. 508615, Article no. 508617 |
|
| Thon : Case 4U Sirus Quad 4CH (1 comments)
With inlay for 4 handheld or 4 pocket transmitters and batteries- 2U Rack rail on top for ...(+) With inlay for 4 handheld or 4 pocket transmitters and batteries- 2U Rack rail on top for 1x 4-way receiver and 1x antenna panel- Installation depth 340 mm- Felt and hook-and-loop fastener at the back for a power supply unit- Mesh pocket in the lid for headset- 7 mm multiplex wood, phenolic resin coated- 22 x 22 mm aluminium edge- 1 Case handle- 4 Drawbolts with eyelet- 8 Small ball corners- 4 Rubber feet- Foam inlay- Foam padding- Exterior dimensions (W x D x H): 530 x 460 x 225 mm- Weight: 6.7 kg- Colour: Brown- Incl. set of screws- Made in Germany |
|
| Thon : Wireless-Systems Case 3U (5 comments)
For handheld transmitters, bodypack transmitters and 19" receivers- Usable height: 3 U- 7 ...(+) For handheld transmitters, bodypack transmitters and 19" receivers- Usable height: 3 U- 7 mm plywood- 22 x 22mm and 25 x 25mm aluminium profile- 4 Drawbolts- 1 Steel strap handle- 4 Large rubber feet- Small steel ball corners- Stepless rack rail- Installation depth (rack rail to rack rail): 25 cm- Installation depth of cabinet from rack rail: 28 cm- Padded accessory compartment in rear lid- External dimensions: 525 x 510 x 190 mm- Weight: 7.6 kg- Includes fixing material- Made in Germany |
|
| Thon : Truhencase T-Bone Speech 100M
Suitable for T-Bone Speech 100M conference system- Case with removable 2U rack for the con...(+) Suitable for T-Bone Speech 100M conference system- Case with removable 2U rack for the control unit- Removable tray with 2 foam inlays for the microphone units (9 delegates or president) and microphones- Space for cables and accessories- Material: 6.5 mm multiplex- 30 x 30 mm Aluminium edge- 2 Medium-sized butterfly latches- 2 Large locking hinges- 4 Medium-sized folding handles- 4 Medium-sized ball corners- 4 Ball corners with L-corner medium- 4 Swivel castors, 2 with brakes- Foam padding- External dimensions (W x D x H): 705 x 595 x 605 mm- Weight: 28.7 kg- Colour: Phenol brown- Made in Germany |
|
| Thon : Inlay 6/0 ew Series (19 comments)
Suitable for 2 U rack with pullout drawers or Thon inlay system case- For 6 Sennheiser ha...(+) Suitable for 2 U rack with pullout drawers or Thon inlay system case- For 6 Sennheiser handheld transmitter ew-(incl. EW-D) series with capsule- Foam in two colours black/ red- 2 Accessory compartments- Milled compartment for replacement batteries- Dimensions (WxDxH): 405 x 375 x 60 mm- Made in Germany |
|
| Thon : Case 6U Sirus Quad 8CH
With inlay for maximum 8 handheld or 8 bodypack transmitters and batteries- 3U rack rail o...(+) With inlay for maximum 8 handheld or 8 bodypack transmitters and batteries- 3U rack rail on top for 2x 4-way receivers and 1x antenna panel- Installation depth 340 mm- Felt and hook-and-loop fastener at the back for a power supply unit- Mesh pocket in lid for headset- 7 mm multiplex wood, phenolic resin coated- 22 x 22 mm aluminium edge- 1 Case handle- 2 Folding handles- 4 Drawbolts with eyelet- 8 Small ball corners- 4 Rubber feet- Foam inlay- Foam padding- Hook-and-loop fastener- External dimensions (W x D x H): 530 x 460 x 316 mm- Weight: 8.1 kg- Colour: Brown- Incl. screw set- Made in Germany |
|
| Thon : Ext. Module Speech 100M 16xC/D
Suitable for t-bone Speech 100M Conference System- Case can be placed on base case Thon Ca...(+) Suitable for t-bone Speech 100M Conference System- Case can be placed on base case Thon Case t.bone Speech 100M- 16xC/D (Article no. 508608)- 4 Removable foam inlays for the microphone units (16 delegates or president) and microphones- Space for cables and accessories- 6.8 mm phenolic resin-coated plywood- 30 x 30 mm Aluminium edges- 4 Medium butterfly latches- 4 Medium folding handles- Foam padding- Accessory compartment- Outer dimensions (W x D x H): Approximately 705 x 595 x 514 mm- Weight: Approximately 19.5 kg- Colour: Brown- Made in Germany |
|
| Thon : Double Door Shure BLX24/SM58 (2 comments)
Suitable for 4 Shure BLX24/SM58 sets- Made of 6.8 mm phenolic resin-coated plywood- 22 x 2...(+) Suitable for 4 Shure BLX24/SM58 sets- Made of 6.8 mm phenolic resin-coated plywood- 22 x 22 mm Aluminium edges- 4 Drawbolts- 1 Suitcase handle on the lid- 8 Small ball corners- 4 Rubber feet: 38 x 20 mm- Foam padding for 4 BLX receivers- Felt at the back for attaching the power supply units- Matching inlay in the rear lid for 4 handheld transmitters- Outer dimensions (W x D x H): Approximately 530 x 405 x 187 mm- Weight: Approximately 6 kg- Colour: Brown- Made in Germany |
|
| Thon : Inlaycase BK ew 2
Thon Case Live for Inlay System BK Custom-Made Case for Inlay System-
For the Thon Inlay ...(+) Thon Case Live for Inlay System BK Custom-Made Case for Inlay System-
For the Thon Inlay System-
Material: 7 mm coated plywood-
22 x 22 mm Aluminium edges-
2 Small butterfly latches-
1 Suitcase handle-
2 Locking hinges-
8 Steel ball corners-
Convoluted foam in the lid-
Internal dimensions (W x D x H): 405 x 375 x 60 mm-
External dimensions (W x D x H): Approximately 445 x 415 x 130 mm-
Weight: Approximately 4.6 kg-
Colour: Black-
Made in Germany Thon Inlay 2/2 ew Series Milled foam inlay-
Suitable for a 2U rack with a fully extendable pullout drawer or a Thon inlay system case-
For 2 x Sennheiser handheld transmitters / pocket transmitter from the ew Series with E935 / 945 / 965 capsule-
Dual-coloured foam: black / red-
Accessory compartment-
Milled compartment for replacement batteries-
Dimensions (WxDxH): 405 x 375 x 60 mm-
Made in Germany |
|
| Thon : Mike's Joker Set
Thon Mike's Joker Case Case for Microphones / Accessories-
Made of 6.5 mm plywood with di...(+) Thon Mike's Joker Case Case for Microphones / Accessories-
Made of 6.5 mm plywood with different colour coatings (colour not freely selectable)-
22 x 22 mm Aluminium edges-
1 Lightweight case handle-
2 Drawbolts-
2 Small locking hinges-
8 Small ball corners-
Outer dimensions: 477 x 130 x 362 mm-
Weight: Approximately 4 kg-
Made in Germany-
Matching microphone insert for 7 microphones: Article no. 460023 (not included) Thon Mike's Inlay 7 Foam Inlay for Microphone Cases-
Packing set consists of: 1x compression cut 440 x 320 x 65 mm and 1x convoluted foam 450 x 320 x 22/8 mm (type PE 5023) |
|
| Thon : Inlaycase BK Shure PSM
Thon Case Live for Inlay System BK Custom-Made Case for Inlay System-
For the Thon Inlay ...(+) Thon Case Live for Inlay System BK Custom-Made Case for Inlay System-
For the Thon Inlay System-
Material: 7 mm coated plywood-
22 x 22 mm Aluminium edges-
2 Small butterfly latches-
1 Suitcase handle-
2 Locking hinges-
8 Steel ball corners-
Convoluted foam in the lid-
Internal dimensions (W x D x H): 405 x 375 x 60 mm-
External dimensions (W x D x H): Approximately 445 x 415 x 130 mm-
Weight: Approximately 4.6 kg-
Colour: Black-
Made in Germany Thon Inlay 8/8 Shure PSM Series Milled foam inlay-
Fits 2 U rack drawer with full extension or Thon Inlay System case-
For 8 Shure IEM bodypacks and 8 in-ear receivers-
Suitable receivers: P3RA, P9RA+, P10R+ or transmitters from the QLX-D and ULX-D Axient digital-
Two-colour foam black/red-
Accessory compartment-
Cut-out for spare batteries-
Dimensions (WxDxH): 405 x 375 x 60 mm-
Made in Germany |
|
| Thon : Inlaycase BK Univ
Thon Case Live for Inlay System BK Custom-Made Case for Inlay System-
For the Thon Inlay ...(+) Thon Case Live for Inlay System BK Custom-Made Case for Inlay System-
For the Thon Inlay System-
Material: 7 mm coated plywood-
22 x 22 mm Aluminium edges-
2 Small butterfly latches-
1 Suitcase handle-
2 Locking hinges-
8 Steel ball corners-
Convoluted foam in the lid-
Internal dimensions (W x D x H): 405 x 375 x 60 mm-
External dimensions (W x D x H): Approximately 445 x 415 x 130 mm-
Weight: Approximately 4.6 kg-
Colour: Black-
Made in Germany Thon Inlay 0/12 Univ Pockettr. Milled foam inlay-
Suitable for 2 U rack with pullout drawers or Thon inlay system case-
For 12 handheld transmitters-
Foam in two colours black/ red-
Accessory compartment-
Milled compartment for handheld transmitter (W x D x H): approx. 118 x 31 x 50 mm-
Dimensions (WxDxH): 405 x 375 x 60 mm-
Made in Germany |
|
| Thon : Inlaycase BK QLXD/ULXD 1
Thon Case Live for Inlay System BK Custom-Made Case for Inlay System-
For the Thon Inlay ...(+) Thon Case Live for Inlay System BK Custom-Made Case for Inlay System-
For the Thon Inlay System-
Material: 7 mm coated plywood-
22 x 22 mm Aluminium edges-
2 Small butterfly latches-
1 Suitcase handle-
2 Locking hinges-
8 Steel ball corners-
Convoluted foam in the lid-
Internal dimensions (W x D x H): 405 x 375 x 60 mm-
External dimensions (W x D x H): Approximately 445 x 415 x 130 mm-
Weight: Approximately 4.6 kg-
Colour: Black-
Made in Germany Thon Inlay 2/2 Shure QLXD/ULXD Milled foam inlay-
Suitable for 2 U rack with full pullout drawers or Thon inlay system case-
For 2 Shure handheld transmitter/ belt pack ULXD1, ULXD2, QLXD2 / QLXD1 with SM58/ 86/ Beta58/ 87 capsule-
Foam in two colours black/ red-
Accessory compartment-
Milled compartment for replacement batteries-
Dimensions (WxDxH): 405 x 375 x 60 mm-
Made in Germany |
|
| Thon : Microphone Flight Case 14 PB
For 14 microphones- 7 mm Polyboard- 22 x 22 mm Aluminium edge- 1 Case handle- 2 Drawbolts-...(+) For 14 microphones- 7 mm Polyboard- 22 x 22 mm Aluminium edge- 1 Case handle- 2 Drawbolts- 2 Locking hinges- Small ball corners- Additional accessory compartment- Interior dimensions (W x H x D): 630 x 95 x 445 mm- Outer dimensions (W x H x D): 660 x 128 x 485 mm- Weight: 6.3 kg- Colour: Black- Made in Germany |
|