| the t.bone : MB 78 Beta (539 comments)
Ideal for vocals and acoustic guitars- Very clean sound- Low cut switch- Polar pattern: Ca...(+) Ideal for vocals and acoustic guitars- Very clean sound- Low cut switch- Polar pattern: Cardioid- Frequency range: 20 - 20,000 Hz- Impedance 200 Ohm- Sensitivity: -48 dB, 4mV / Pa- Maximum sound pressure level: (k = 1%): 136 dB- Audio connector: 3-pin XLR connector- Requires 9-52 V phantom power- Without switch- Incl. Mount and storage box for transport- Weight: 240 g, light |
|
| the t.bone : Ovid System CC 100 (1410 comments)
Directional characteristic: Cardioid- Frequency response: 20 - 20,000 Hz- Flexible goosene...(+) Directional characteristic: Cardioid- Frequency response: 20 - 20,000 Hz- Flexible gooseneck for an easy instrument setup- 3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)- Gooseneck length: 130 mm- Cable length: 2 m- Easy to install and can be used with different instrument clips (not included, must be ordered separately)- Includes an XLR phantom power adapter (phantom power required) and a foam windshield |
|
| the t.bone : SC 140 Stereoset (913 comments)
Matched pair condenser microphones the t.bone SC140- With 18 mm capsules- Cardioid- Ideal ...(+) Matched pair condenser microphones the t.bone SC140- With 18 mm capsules- Cardioid- Ideal for recording of drum set (overhead, hihat), acoustic guitar or piano- Frequency range: 20 - 20.000 Hz- 48V Phantom power required- With low cut (-3 dB @ 75 Hz o. 150Hz) and pad switch (-10 dB o. -20dB)- Sensitivity: -38 dBV (12.6mV/ Pa)- Max. SPL: 130 dB- Incl. shock mount, wind shields and stereo bar- Delivered in a aluminium case |
|
| the t.bone : MB 78 Beta Bundle
the t.bone MB 78 Beta Condenser Microphone-
Ideal for vocals and acoustic guitars-
Very ...(+) the t.bone MB 78 Beta Condenser Microphone-
Ideal for vocals and acoustic guitars-
Very clean sound-
Low cut switch-
Polar pattern: Cardioid-
Frequency range: 20 - 20,000 Hz-
Impedance 200 Ohm-
Sensitivity: -48 dB, 4mV / Pa-
Maximum sound pressure level: (k = 1%): 136 dB-
Audio connector: 3-pin XLR connector-
Requires 9-52 V phantom power-
Without switch-
Incl. Mount and storage box for transport-
Weight: 240 g, light Roadworx Mic Stand Tripod Boom Microphone stand with boom arm-
Length: ca. 92 to 150 cm-
Boom arm length : 70 cm-
Thread: 3/8" and with a 5/8" adapter-
Weight: 2.2 kg-
Colour: Black the sssnake SM10BK Microphone Cable-
XLR 3-pin male < - > XLR 3-pin female-
Length: 10 m-
Diameter: 6 mm-
Wire cross-section: 2 x 0.22 mm²-
Colour: Black |
|
| the t.bone : Lucan System Clarinet Bundle
the t.bone Lucan System CC 200 RC Condenser instrument microphone-
Easy installation with...(+) the t.bone Lucan System CC 200 RC Condenser instrument microphone-
Easy installation with various instrument holders for many different instruments (not included)-
Flexible gooseneck 120 mm for easy alignment on the instrument-
Detachable cable with screw contact-
3-pin mini XLR plug for use with t.bone wireless systems (also suitable for Sirus and AKG wireless systems)-
Polar pattern: Cardioid-
Frequency range: 30 - 20.000 Hz-
Sensitivity: -38 dB +/- 2 dB-
Max. SPL: 130 dB-
Signal-to-noise ratio: 71 dB-
Impedance 100 Ohm-
Distortion factor: < 1%-
Cable length approx. 2 m-
Incl. Windscreen, phantom power adapter (phantom power required) and hard case (with space for an optional holder)-
Dimensions of the hard case (L x W x H): 26 x 13 x 7 cm the t.bone Lucan System CC 200 CH Microphone Holder-
Clarinet-clip for the Lucan System CC 200 RC-
For fixing on clarinets or similar instruments with a strong hook-and-loop tape up to a diameter of 65 mm |
|
| the t.bone : Lucan System CC 200 RC (73 comments)
Easy installation with various instrument holders for many different instruments (not incl...(+) Easy installation with various instrument holders for many different instruments (not included)- Flexible gooseneck 120 mm for easy alignment on the instrument- Detachable cable with screw contact- 3-pin mini XLR plug for use with t.bone wireless systems (also suitable for Sirus and AKG wireless systems)- Polar pattern: Cardioid- Frequency range: 30 - 20.000 Hz- Sensitivity: -38 dB +/- 2 dB- Max. SPL: 130 dB- Signal-to-noise ratio: 71 dB- Impedance 100 Ohm- Distortion factor: < 1%- Cable length approx. 2 m- Incl. Windscreen, phantom power adapter (phantom power required) and hard case (with space for an optional holder)- Dimensions of the hard case (L x W x H): 26 x 13 x 7 cm |
|
| the t.bone : Ovid System Violin Bundle (6 comments)
the t.bone Ovid System CC 100 Condenser lip Microphone for Ovid System-
Directional char...(+) the t.bone Ovid System CC 100 Condenser lip Microphone for Ovid System-
Directional characteristic: Cardioid-
Frequency response: 20 - 20,000 Hz-
Flexible gooseneck for an easy instrument setup-
3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)-
Gooseneck length: 130 mm-
Cable length: 2 m-
Easy to install and can be used with different instrument clips (not included, must be ordered separately)-
Includes an XLR phantom power adapter (phantom power required) and a foam windshield the t.bone Ovid System Violin Clip Modular violin microphone holder for the Ovid system-
Easy installation without tools-
Black rubber end pieces protect the instrument from damage-
Adjustable up to approx. 4.5 cm body width-
Thumbscrew-
Also suitable for mandolin and similar instruments the t.bone Ovid System Case Plastic Case-
With recess for all Ovid system microphone clamps and the CC 100 microphone-
Outer Dimensions: 30 x 23 x 7.5 cm |
|
| the t.bone : SC 400
1" Gold membrane- Polar pattern: Super-cardioid- Frequency range: 20 - 20,000 Hz- Sensitiv...(+) 1" Gold membrane- Polar pattern: Super-cardioid- Frequency range: 20 - 20,000 Hz- Sensitivity: 23.3 mV / Pa- Equivalent noise level: 18 dB (A)- Output impedance: 120 Ohm- Peak SPL: 132 dB- Internal low cut switch at 100 Hz with 6 dB- Requires +48 V phantom power- Weight of the microphone: 351 g- Colour: Black- Shock mount and bag included |
|
| the t.bone : Ovid System Cello Bundle
the t.bone Ovid System CC 100 Condenser lip Microphone for Ovid System-
Directional char...(+) the t.bone Ovid System CC 100 Condenser lip Microphone for Ovid System-
Directional characteristic: Cardioid-
Frequency response: 20 - 20,000 Hz-
Flexible gooseneck for an easy instrument setup-
3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)-
Gooseneck length: 130 mm-
Cable length: 2 m-
Easy to install and can be used with different instrument clips (not included, must be ordered separately)-
Includes an XLR phantom power adapter (phantom power required) and a foam windshield the t.bone Ovid System Cello Clip Modular cello microphone holder for Ovid System-
Easy installation without tools-
Black rubber end caps protect the instrument from damaging-
Set screw-
Width: 59 mm the t.bone Ovid System Case Plastic Case-
With recess for all Ovid system microphone clamps and the CC 100 microphone-
Outer Dimensions: 30 x 23 x 7.5 cm |
|
| the t.bone : EM 9900 (166 comments)
Polar pattern: hyper cardioid/ lobar- Frequency range: 30 Hz - 20 kHz- Switchable low cut ...(+) Polar pattern: hyper cardioid/ lobar- Frequency range: 30 Hz - 20 kHz- Switchable low cut @ 180 Hz (12dB/ Oct.)- Impedance: 200 Ohm- Max. SPL: 130 dB- Required phantom power: 9 - 52V- XLR Connector- Diameter: 21 mm- Length: 413.5 mm- Incl. wind shield and clamp |
|
| the t.bone : Lucan System Violin Bundle
the t.bone Lucan System CC 200 RC Condenser instrument microphone-
Easy installation with...(+) the t.bone Lucan System CC 200 RC Condenser instrument microphone-
Easy installation with various instrument holders for many different instruments (not included)-
Flexible gooseneck 120 mm for easy alignment on the instrument-
Detachable cable with screw contact-
3-pin mini XLR plug for use with t.bone wireless systems (also suitable for Sirus and AKG wireless systems)-
Polar pattern: Cardioid-
Frequency range: 30 - 20.000 Hz-
Sensitivity: -38 dB +/- 2 dB-
Max. SPL: 130 dB-
Signal-to-noise ratio: 71 dB-
Impedance 100 Ohm-
Distortion factor: < 1%-
Cable length approx. 2 m-
Incl. Windscreen, phantom power adapter (phantom power required) and hard case (with space for an optional holder)-
Dimensions of the hard case (L x W x H): 26 x 13 x 7 cm the t.bone Lucan System CC 200 VH Microphone Mount-
Violin clip for the Lucan System CC 200 RC-
Suitable for clamping to violins or similar instruments with a thickness of 35 to 55 mm |
|
| the t.bone : Lucan System Multi Clip Bundle
the t.bone Lucan System CC 200 RC Condenser instrument microphone-
Easy installation with...(+) the t.bone Lucan System CC 200 RC Condenser instrument microphone-
Easy installation with various instrument holders for many different instruments (not included)-
Flexible gooseneck 120 mm for easy alignment on the instrument-
Detachable cable with screw contact-
3-pin mini XLR plug for use with t.bone wireless systems (also suitable for Sirus and AKG wireless systems)-
Polar pattern: Cardioid-
Frequency range: 30 - 20.000 Hz-
Sensitivity: -38 dB +/- 2 dB-
Max. SPL: 130 dB-
Signal-to-noise ratio: 71 dB-
Impedance 100 Ohm-
Distortion factor: < 1%-
Cable length approx. 2 m-
Incl. Windscreen, phantom power adapter (phantom power required) and hard case (with space for an optional holder)-
Dimensions of the hard case (L x W x H): 26 x 13 x 7 cm the t.bone Lucan System CC 200 MH Microphone Mount-
Multi-Clip for the Lucan System CC 200 RC-
Suitable for clipping onto cello, saxophone, trombone, cornet or similar instruments with a thickness up to 23 mm |
|
| the t.bone : Ovid System Complete Bundle
the t.bone Ovid System CC 100 Condenser lip Microphone for Ovid System-
Directional char...(+) the t.bone Ovid System CC 100 Condenser lip Microphone for Ovid System-
Directional characteristic: Cardioid-
Frequency response: 20 - 20,000 Hz-
Flexible gooseneck for an easy instrument setup-
3-Pin Mini XLR connector for operation with t.bone wireless systems (also suitable for AKG wireless systems)-
Gooseneck length: 130 mm-
Cable length: 2 m-
Easy to install and can be used with different instrument clips (not included, must be ordered separately)-
Includes an XLR phantom power adapter (phantom power required) and a foam windshield the t.bone Ovid System Piano Clip Microphone Clip-
Modular piano microphone clip for Ovid systems-
Easy to install without tools with enclosed adhesive tape the t.bone Ovid System Cello Clip Modular cello microphone holder for Ovid System-
Easy installation without tools-
Black rubber end caps protect the instrument from damaging-
Set screw-
Width: 59 mm the t.bone Ovid System Bass Clip Modular double bass microphone clip for Ovid systems-
Easy to install without tools-
Black rubber end caps protect the instrument from damage-
Locking screw-
Width 47 mm the t.bone Ovid System Flute Clip Modular Flute Microphone Clip-
For Ovid systems-
Easy to install without tools-
Also suitable for transverse flute, clarinet etc. the t.bone Ovid System Sax Clip Modular saxophone microphone clip for Ovid systems-
Easy to install without tools-
Black rubber end caps protect the instrument from damage-
Locking screw-
Also suitable for trumpet, trombone etc.-
Not suitable for soprano saxophone the t.bone Ovid System Violin Clip Modular violin microphone holder for the Ovid system-
Easy installation without tools-
Black rubber end pieces protect the instrument from damage-
Adjustable up to approx. 4.5 cm body width-
Thumbscrew-
Also suitable for mandolin and similar instruments the t.bone Ovid System Guitar Clip Modular Guitar Microphone Clip for Ovid systems-
Easy to install without tools-
Black rubber end caps protect the instrument from damage-
Locking screw-
Max body width 12.5 cm the t.bone Ovid System Case Plastic Case-
With recess for all Ovid system microphone clamps and the CC 100 microphone-
Outer Dimensions: 30 x 23 x 7.5 cm |
|
| the t.bone : Lucan System Guitar Bundle
the t.bone Lucan System CC 200 RC Condenser instrument microphone-
Easy installation with...(+) the t.bone Lucan System CC 200 RC Condenser instrument microphone-
Easy installation with various instrument holders for many different instruments (not included)-
Flexible gooseneck 120 mm for easy alignment on the instrument-
Detachable cable with screw contact-
3-pin mini XLR plug for use with t.bone wireless systems (also suitable for Sirus and AKG wireless systems)-
Polar pattern: Cardioid-
Frequency range: 30 - 20.000 Hz-
Sensitivity: -38 dB +/- 2 dB-
Max. SPL: 130 dB-
Signal-to-noise ratio: 71 dB-
Impedance 100 Ohm-
Distortion factor: < 1%-
Cable length approx. 2 m-
Incl. Windscreen, phantom power adapter (phantom power required) and hard case (with space for an optional holder)-
Dimensions of the hard case (L x W x H): 26 x 13 x 7 cm the t.bone Lucan System CC 200 GH Microphone Mount-
Guitar clip for the Lucan System CC 200 RC-
Suitable for clamping onto guitars or similar instruments with a thickness between 73 and 120 mm |
|