| the t.racks : DBMeter
(180 comments)
DB Meter- For rack mounting - Measures the decibel level of the sum signal - Produces inte...(+) DB Meter- For rack mounting - Measures the decibel level of the sum signal - Produces interesting lighting in your amplifier rack - LED indicator changes from green to yellow - Sensitivity adjustment for right and left channel - 2 Separate LED modes: dot and bar - Demo mode for activating the LED without audio signal - Including 12 V DC 500 mA, UL approved power supply - High level inputs: RCA jacks left / right and XLR jacks left / right for balanced signal transmission - High level outputs: RCA jacks left / right and XLR jacks left / right for balanced signal transmission - Power consumption: 10 W - Dimensions (L x W x H): 483 x 44.5 x 44.5 mm - Weight: 0.85 kg |
|
| the t.racks : VM-100 Voltage Meter
(511 comments)
Voltage Meter- LED Power indicator - With pull-out lamps as rack lighting - 8x Integrated ...(+) Voltage Meter- LED Power indicator - With pull-out lamps as rack lighting - 8x Integrated IEC sockets on the rear panel (switchable by switches on front) - Filter to protect the connected equipment from interference and voltage peaks - Resettable electronic 10 A fuse against overloading - Control of the supply voltage by three-color LED chain - Width: 19" - Height: 1U - Replacement lamps available under Article Nr 106424 |
|
| the t.racks : Phase Checker
(1 comments)
Phase Tester- For checking acoustic transducers (loudspeakers, microphones) as well as ele...(+) Phase Tester- For checking acoustic transducers (loudspeakers, microphones) as well as electrical audio accessories - Consists of a signal generator and a detector - Generator with acoustic and electrical output - Output level adjustable - Detector with acoustic and electrical input (Mic int./Line in / Mic ext switchable) - LED display - Power supply (per device): 1x 9 V battery (not included) |
|
| the t.racks : DS2418
(261 comments)
Audio splitter- 2 in 4 or 1 in 8 - Each output can be controlled separately - XLR inputs/o...(+) Audio splitter- 2 in 4 or 1 in 8 - Each output can be controlled separately - XLR inputs/outputs - Design: 19", 1U - Installation depth: 12 cm |
|
| the t.racks : Eight
Microphone splitter- 8 Channels - 8x XLR inputs - 16x XLR out - Direct output and a galvan...(+) Microphone splitter- 8 Channels - 8x XLR inputs - 16x XLR out - Direct output and a galvanic isolated output per transformer on each channel - Transit of phantom power to the main output - Ground-lift switch for the isolated output - Input link switch - Dimensions: 19", 1U |
|
(Change geographical area)
ACCESSORIES - STUDIO/LIVE
