the t.bone : Lucan System Piano Bundle
the t.bone Lucan System CC 200 RC Microphone pour instrument à condensateur-
Installatio...(+) the t.bone Lucan System CC 200 RC Microphone pour instrument à condensateur-
Installation facile avec différents supports pour de nombreux instruments différents (non inclus)-
Col de cygne flexible de 120 mm pour un placement aisé sur l'instrument-
Câble détachable avec contact à vis-
Mini-fiche XLR 3 broches pour une utilisation avec les systèmes sans fil t.bone (convient également aux systèmes sans fil Sirus et AKG)-
Directivité : cardioïde-
Réponse en fréquence : 30 - 20000 Hz-
Sensibilité : -38 dB +/- 2 dB-
SPL Max. : 130 dB-
Rapport signal/bruit : 71 dB-
Impédance : 100 Ohm-
facteur de distorsion : | |
the t.bone : Lucan System Multi Clip Bundle
the t.bone Lucan System CC 200 RC Microphone pour instrument à condensateur-
Installatio...(+) the t.bone Lucan System CC 200 RC Microphone pour instrument à condensateur-
Installation facile avec différents supports pour de nombreux instruments différents (non inclus)-
Col de cygne flexible de 120 mm pour un placement aisé sur l'instrument-
Câble détachable avec contact à vis-
Mini-fiche XLR 3 broches pour une utilisation avec les systèmes sans fil t.bone (convient également aux systèmes sans fil Sirus et AKG)-
Directivité : cardioïde-
Réponse en fréquence : 30 - 20000 Hz-
Sensibilité : -38 dB +/- 2 dB-
SPL Max. : 130 dB-
Rapport signal/bruit : 71 dB-
Impédance : 100 Ohm-
facteur de distorsion : | |
the t.bone : Ovid System Piano Bundle
the t.bone Ovid System CC 100 Micro à condensateur pour système Ovid-
Installation faci...(+) the t.bone Ovid System CC 100 Micro à condensateur pour système Ovid-
Installation facile avec différentes attaches d'instruments (disponibles en option)-
Directivité: cardioïde-
Réponse en fréquence: 20 - 20,000 Hz-
Col de cygne flexible pour un positionnement facile-
Bonnette en mousse-
Connecteur 3 broches mini-XLR pour une utilisation avec systèmes sans fil t.bone (aussi pour systèmes sans fil AKG)-
Adaptateur XLR fantôme (nécessite une alimentation Phantom)-
Longueur du col de cygne: 130 mm-
Longueur de câble: 2m the t.bone Ovid System Piano Clip Système d'attache pour piano Ovid-
Installation facile avec une bande adhésive the t.bone Ovid System Case Mallette de transport pour système Ovid-
Mallette en plastique-
Compartiments pour micro CC 100 et toutes les pinces Ovid-
Dimensions externes: 30 x 23 x 7,5 cm | |
the t.bone : Lucan System Complete Bundle
the t.bone Lucan System CC 200 RC Microphone pour instrument à condensateur-
Installatio...(+) the t.bone Lucan System CC 200 RC Microphone pour instrument à condensateur-
Installation facile avec différents supports pour de nombreux instruments différents (non inclus)-
Col de cygne flexible de 120 mm pour un placement aisé sur l'instrument-
Câble détachable avec contact à vis-
Mini-fiche XLR 3 broches pour une utilisation avec les systèmes sans fil t.bone (convient également aux systèmes sans fil Sirus et AKG)-
Directivité : cardioïde-
Réponse en fréquence : 30 - 20000 Hz-
Sensibilité : -38 dB +/- 2 dB-
SPL Max. : 130 dB-
Rapport signal/bruit : 71 dB-
Impédance : 100 Ohm-
facteur de distorsion : | |
the t.bone : Lucan System CC 200 PH (12 comments)
Attache de piano pour le système Lucan CC 200 RC- Convient pour la fixation sur des piano...(+) Attache de piano pour le système Lucan CC 200 RC- Convient pour la fixation sur des pianos ou des instruments similaires à l'aide d'un aimant puissant | |
NEUMANN MCM 114 STEREO SET PIANO
Ensemble micro complet pour piano ou un piano à queue STEREO SET PIANOSet stéréo comple...(+) Ensemble micro complet pour piano ou un piano à queue STEREO SET PIANOSet stéréo complet pour l'utilisation du système Neumann Miniature Clip Mic MCM dans/sur un piano ou un piano à queue. Contient deux de chaque : Capsule KK 14, col de cygne SH 150, support de câble KC 1, câble AC 31, étage de sortie MCM 100, bonnette anti-vent WS 110, clip MC 8. Livré dans deux étuis souples très pratiques.Le vrai son Neumann pour la prise de son rapprochée d'instruments acoustiques en direct.Points forts Élève le principe des électrets au niveau des normes sonores Neumann. La durabilité décuple le retour sur investissement. Une seule capsule pour les instruments forts et doux Fonctionne avec les boîtiers d'émetteurs clésLA NOUVELLE RÉFÉRENCE EN MATIÈRE DE PRISE DE SON RAPPROCHÉELe système Miniature Clip Mic MCM place la barre plus haut pour les capsules à électret. Et comme un vrai Neumann, il capte le son typique de tous les instruments acoustiques dans les applications live. Il redéfinit la norme en matière de son naturel, de praticité, de fiabilité de montage et de longévité. Le système comprend neuf clips de montage spécifiques pour une grande variété d'instruments acoustiques. La construction modulaire permet des remplacements faciles et garantit un faible coût de possession.LA CAPSULE : 8 PARTS DE PERFECTIONUn nouveau niveau d'équilibre tonal, plus de corps, en particulier dans les basses et les moyennes fréquences, et de la transparence dans les aigus : La nouvelle capsule cardioïde KK 14 surmonte les anciennes limites des principes de l'électret et capture la signature sonore d'une large gamme de sources acoustiques. Pour y parvenir, Neumann a développé une conception basée sur des couches. Chacun des huit composants clés de la capsule est conçu pour une performance optimale, fabriqué indépendamment et assemblé à la main par la suite. Le contrôle strict de la qualité garantit également un niveau inégalé de cohérence tonale. Chaque capsule a exactement le même son et délivre un son neutre de type Neumann, ce qui permet de gagner du temps lors de la configuration et du réglage de l'égaliseur, en particulier lorsque plusieurs microphones sont utilisés simultanément.Avec un bruit propre ultra faible de 23 dBA et un niveau sonore maximal extrêmement élevé de 153 dB SPL, le KK 14 donne des résultats parfaits, qu'il s'agisse d'instruments très silencieux ou très forts.Le boîtier en titane est résistant à la route et protège les parties les plus sensibles pendant des années. SE CONNECTE À TOUS LES SYSTÈMES SANS FILLe système MCM comprend des options de câbles interchangeables avec des connecteurs jack 3,5 mm, Lemo, mini-XLR 4 broches et MicroDot - aucun adaptateur n'est nécessaire. Le microphone peut également fonctionner avec une connexion filaire en utilisant l'étage de sortie haut de gamme MCM 100 et le câble jack 3,5 mm.MONTAGE : DOUX POUR LES SURFACES - FIABLE POUR LES INGÉNIEURSUn élément fondamental du Système MCM est une palette exhaustive d'options de montage qui permettent un positionnement simple et fiable du microphone sur n'importe quel instrument. Leur mécanisme ménage même les surfaces les plus sensibles et fait du montage une question de secondes, ne nécessitant qu'une seule main pour la plupart des instruments. Le support col de cygne tourne sur un ou deux axes et se bloque par incréments de 45° pour permettre un réglage précis.ENSEMBLES D'INSTRUMENTSTous les composants du système sont disponibles séparément. Pour de nombreuses applications courantes, il existe également des ensembles complets dans une mallette souple avec tous les composants nécessaires.CE PACK COMPRENDS 2 x KK 14 2 x SH 150 2 x KC 1 2 x AC 31 (1.8 M) 2 x WS 110 2 x MCM 100 2 x MC 6 2 x Guide de sécurité 2 x Guide rapide 2 x Étui soupleCHARACTÉRISTIQUES : Capsule KK 14 avec étage de sortie MCM 100 Principe de fonctionnement acoustique : Transducteur de gradient de pression. Configuration polaire : Cardioïde Réponse en fréquence : 20 Hz...20 kHz Impédance nominale : 50 ohms Impédance de charge nominale : 1000 ohms Rapport signal/bruit (4), CCIR (5) : 63 dB Rapport signal/bruit (4), pondéré A (5) : 71 dB Niveau de bruit équivalent, CCIR (5) : 31 dB Niveau de bruit équivalent, pondéré A (5) : 23 dB-A Max. SPL (6) pour THD < 0,5 % : 153 dB SPL Alimentation électrique : 48 V ± 4V (P48, IEC 61938) Consommation de courant : 3,5 mA Connecteurs requis : XLR 3 F Conditions atmosphériques admissibles (1) : Température de fonctionnement : 0 °C ... +40 °C Humidité de fonctionnement : 0 %...90 % rel. hum. Température de stockage : -20 °C ... +70 °C Humidité de stockage : 0 %...95 % rel. hum. 94 dB SPL 1 Pa = 10 bar 0 dB 20 Pa1) Toutes les valeurs sont pour une humidité sans condensation. Les valeurs sont valables pour des microphones ou des capsules de microphones propres et bien entretenus, respectivement. Toute forme de pollution des capsules et des membranes peut restreindre lesdites valeurs.2) à 1 kHz dans une impédance de charge nominale de 1 kohms, tolérance ± 2 dB4) à partir de 94 dB SPL5) selon IEC 60268-1 ; pondération CCIR selon CCIR 468-3, quasi-crête ; pondération A selon IEC 61672-1, RMS6) THD de l'amplificateur du microphone à une tension d'entrée équivalente à la sortie de la capsule au SPL spécifié. | |
FOCUSRITE CLARETT+ OCTOPRE
FOCUSRITE CLARETT OCTOPRE+Profitez du son classique de Focusrite, avec le mode Air tout an...(+) FOCUSRITE CLARETT OCTOPRE+Profitez du son classique de Focusrite, avec le mode Air tout analogiqueRetournez aux sources de Focusrite grâce au circuit analogique à relais haut de gamme équipant chaque préampli. Il émule le classique ISA 110, celui qu\'on trouvait sur la Console de studio originale de Focusrite. Lorsque le mode Air est activé, l\'impédance passe à 2,2 k et deux high shelves cumulatifs boostent les hautes fréquences de 4 dB au total. Capturez la version la plus pure de votre son avec le préampli micro Clarett+Obtenez des enregistrements d\'une parfaite netteté, séance après séance.Avec une plage dynamique de 118 dB et un niveau de bruit équivalent (EIN) de 129 dBu, l\'intégrité des signaux sources est préservée. Le trajet de signal entièrement symétrique garantit des signaux entrants parfaitement nets, avec un niveau de bruit minime vous profitez ainsi du son de studio professionnel de Focusrite à chaque séance d\'enregistrement. Des inserts sur chaque canalLes huit inserts dédiés présents sur le Clarett+ OctoPre vous permettent d\'enregistrer au travers de vos processeurs externes préférés et d\'en capturer tout le caractère.Ajoutez aisément des équipements analogiques au trajet du signal grâce à notre design d\'inserts flexible.Un multitracking précis grâce aux convertisseurs A/N optimisés Enregistrez plusieurs sources simultanément en toute confiance et gérez n\'importe quelle séance d\'enregistrement, quelle que soit son ampleur. Grâce à ses niveaux de bruit et de distorsion ultra-faibles, le convertisseur A/N du Clarett+ OctoPre, combiné aux puissants préamplis, vous permettra d\'effectuer des prises de qualité professionnelles, prêtes à être mixées.Préservez votre style grâce aux convertisseurs N/A améliorésL\'exceptionnel convertisseur N/A qui équipe le Clarett+ OctoPre permet aux ingénieurs(es) du son de traiter facilement les prises en y apportant leur touche de style. Ils et elles seront sûrs que la qualité sonore sera préservée quand ils et elles enverront l\'audio dans des compresseurs, égaliseurs et effets analogiques. Branchez le Clarett+ OctoPre à une Clarett+ 8Pre via ADAT et envoyez 16 canaux à une console de mixage. La meilleure qualité sonore en ADAT Ajoutez le Clarett+ OctoPre à une 2Pre, 4Pre ou 8Pre via ADAT et profitez d\'un plus grand nombre d\'E/S en toute simplicité. Ceux et celles qui n\'utilisent pas de Clarett+ peuvent faire évoluer leur configuration et profiter du son classique professionnel de Focusrite en branchant le préampli à une interface compatible avec l\'ADAT. Ils et elles bénéficieront ainsi de la qualité supérieure offerte par le Clarett+ OctoPre.Préservez le son naturel de votre guitareCapturez toutes les nuances sonores de votre guitare grâce aux entrées instruments à JFET du Clarett+ OctoPre. La généreuse largeur de bande de ces entrées préserve la pureté des hautes fréquences. Vous aurez l\'impression de brancher votre guitare directement à un ampli. Bundle logicielsObtenez des résultats de qualité professionnelle grâce au bundle Hitmaker Expansion. Il inclut des plug-ins de mixage et des instruments virtuels. Focusrite Plug-in Collective Enregistrez votre matériel pour recevoir régulièrement des réductions et des versions exclusives des logiciels les plus innovants.Extension HitmakerBrainworx® bx_console Focusrite SCLes préamplis qui ont fait de Focusrite une marque incontournable pour votre musique. Aucun autre plug-in ne reproduit le caractère exceptionnel de notre console grand format mythique, avec ses préamplis ISA 110 l\'origine du célèbre mode \'Air\' que l\'on trouve encore aujourd\'hui sur les interfaces de Focusrite. Le plug-in bx_console Focusrite SC est une tranche de console complète qui réunit un égaliseur, un dé-esseur, un compresseur, un limiteur, un gate et un extenseur.Brainworx® bx_masterdeskLe système de mastering analogique haut de gamme qui apporte la touche finale à vos morceaux. Alliant l\'art du mastering à un environnement de travail intuitif, il permet aussi bien aux réalisateurs(trices) artistiques en herbe qu\'aux professionnels(les) chevronnés d\'obtenir rapidement et aisément des résultats dignes des plus grands studios.Brainworx® bx_oberhausenLa reproduction virtuelle à l\'identique d\'un synthé polyphonique américain classique. Le plug-in bx_oberhausen modélise chaque composant de cette icône analogique. Et avec ses 32 voix, cette version logicielle fournit le double de ce qu\'offrent les plus importants synthés entièrement analogiques du marché actuel à vous les magnifiques accords et les énormes unissons !Suite de plug-ins Focusrite Red 2 & 3Ce duo modélise les égaliseur et compresseur mythiques qui ont fait la légende de Focusrite. Si vous avez écouté des albums majeurs ces 30 dernières années, vous connaissez les Red 2 et 3.Antares® Auto-Tune® AccessDe la correction tonale en temps quasi-réel pour des prises vocales naturelles impeccables, jusqu\'au pitch-shifter ultra-rapide de style hip-hop pour réinventer vos morceaux, il sait tout faire.Relab LX480 EssentialsProfitez de quatre réverbes modélisées à partir des processeurs matériels présents dans le Hit Factory NYC. Retrouvez avec LX480 Essentials le son d\'un studio qui a accueilli Springsteen, les Stones, Kool and the Gang, The Weeknd, Pharell, Katy Perry, etc.Softube® Marshall® Silver Jubilee 2555L\'évolution moderne du mythique JCM800 développée par les experts de la modélisation d\'équipements analogiques, Softube®. Le Silver Jubilee produit aussi bien un son clair chaleureux qu\'un crunch classique et le son à lampes moderne à haut niveau de gain.XLN Audio® Addictive KeysFaites résonner un magnifique son de piano dans vos compositions grâce à l\'une des quatre modélisations professionnelles des instruments de Steinway®, Yamaha® et du classique Rhodes®. Branchez votre clavier MIDI et commencez à jouer. Vous serez immédiatement transporté(e) dans un studio d\'enregistrement professionnel configuré pour capturer le son de l\'un de ces splendides pianos sans sortir de votre studio.XLN Audio® Addictive Drums 2: Studio RockProfitez du son d\'un batteur professionnel en toute simplicité, grâce aux samples de batteries Tama et Pearl et de cymbales Paiste et Sabian enregistrées aux Decibel Studios à Stockholm.Focusrite Plug-in CollectiveRecevez plusieurs fois par an un nouveau plug-in et des offres exclusives d\'un nouveau partenaire.CaractéristiquesFocusrite Clarett+ OctoPrePréampli micro 8 canaux/convertisseur ligne AD/DA avec 2 entrées instrument JFETConversion A/N et N/A 24 bits avec une fréquence d\'échantillonnage jusqu\'à 192 kHzCircuitAirentièrement analogique contrôlé par relais dans chaquePréampli, pour émuler le Focusrite ISA 110 classiquePlage dynamique de 118 dB et 129 dBu ONChemin de signal entièrement équilibré8x inserts de canal dédiésAlimentation fantôme +48 V (commutable dans les groupes 1-4 et 5-8)Indicateur de niveau à LED à 8 segments et LED de clip de canal2 entrées combo micro/instrument XLR/jack 6,3 mm6 entrées combo micro/ligne XLR/jack 6,3 mm8x insert jack 6,3 mm1x sortie ligne sub-D25 (8 canaux)Entrée et sortie word clock BNC2x entrée et sortie ADATHitmaker Expansion Software Bundle (Ableton Live Lite, 3 mois d\'abonnement à Splice Sounds et Plugin Bundle pour l\'écriture, le mixage et le mastering)Plugins d\'extension Hitmaker : Softube Marshall Silver Jubilee 2555, XLN Audio, Addictive Keys, XLN Audio Addictive Drums 2, Brainworx bx_oberhausen, Accès Antares Auto-Tune, Brainworx Bx_console Focusrite SC, Focusrite Red 2 & 3, Plug-in Suite, LX480 Essentials de Relab, Brainworx bx_masterdeskFormat : 19/ 1 UDimensions : 482 x 286 x 44,5 mmPoids : 4,15 kg | |
DPA KIT-4099-DC-4R
4099 Extreme SPL Touring Kit DPA microphones KIT-4099-DC-4RMaintenant avec la technologie ...(+) 4099 Extreme SPL Touring Kit DPA microphones KIT-4099-DC-4RMaintenant avec la technologie CORE by DPALe microphone d'instrument 4099 est déjà la norme reconnue pour ce type de microphone et la version CORE ajoute juste une autre couche de qualité sonore qui démarque encore plus ce micro de ses concurrents.Le 4099 apporte plus de clarté et de détails à votre musique, sur toute la gamme dynamique. Tous ceux qui recherchent la plus haute qualité sonore devraient choisir le CORE de DPA - tous les musiciens, les ingénieurs du son en direct et tous ceux qui sont fiers de la qualité audio.CORE by DPA est une nouvelle technologie puissante au cœur des microphones miniatures DPA. Nous avons minimisé la distorsion. Du pianissimo au forte, vous bénéficierez d'une clarté et d'une ouverture accrues. En savoir plus sur CORE by DPA. Pour en savoir plus sur CORE by DPA, cliquez ici.Du piano à la guitare, des cordes aux bois, des cuivres aux percussions, la série 4099 est aussi impressionnante sur tous ces instruments. Ce modèle de microphone unique peut magnifiquement renforcer un orchestre entier. Vous pouvez déplacer le micro sur un autre instrument ; assurez-vous simplement d'avoir le bon type de pince pour le monter correctement.La série 4099 primée vous offre un son beaucoup plus naturel que n'importe quel microphone ou micro à pince. Ce microphone à condensateur rejette les bruits indésirables et capture avec précision la véritable voix de votre instrument acoustique.Ce microphone est livré avec la version :4099 CORE Mic, Extreme SPL - utilisé pour le micro rapproché d'instruments extrêmement bruyants, tels que les tambours et certains cuivres.Le 4099 CORE est également doté d'une conception améliorée de monture antichoc, offrant une excellente isolation des bruits de manipulation et des grondements. Les câbles détachables sont disponibles en version lourde ou légère, selon l'application - les deux sont conçus pour résister aux rigueurs d'une utilisation quotidienne. Une rallonge col de cygne intégrée et polyvalente permet un montage facile et répétable. La série 4099, maintes fois primée, vous offre un son beaucoup plus naturel que n'importe quel microphone ou micro interne. Ce microphone à condensateur rejette les bruits indésirables et capture avec précision la véritable voix de votre instrument acoustique. Ces micros sont disponibles en kits de 4 ou 10 pièces avec les accessoires correspondants pour faciliter le micro d'un groupe, d'un groupe ou d'un orchestre.Un kit parfait pour vos besoinsDeux types de kits différents sont disponibles et ils peuvent chacun être achetés avec 4 ou 10 microphones. Prêt à être utilisé sur la route par les sociétés de location, les musiciens ou les théâtres, le kit 4099 Classic Touring offre des microphones et une sélection d'accessoires choisis pour une utilisation typique dans un cadre de musique acoustique. Ce kit comprend un certain nombre de microphones d'instrument 4099 CORE pour SPL élevé, qui sont parfaits pour une utilisation sur une large gamme d'instruments - de la flûte à la guitare, et tout ce qui se trouve entre les deux.Le kit de tournée rock 4099 propose un certain nombre de microphones à condensateur 4099 et une sélection d'accessoires sélectionnés pour une utilisation typique dans un environnement de musique rock en direct. Avec un SPL maximum, pic avant écrêtage de 152 dB, le microphone d'instrument 4099 CORE pour les instruments à SPL extrême a été conçu pour être utilisé sur les batteries, les percussions et d'autres instruments bruyants, comme la trompette et le saxophone.A propos des microphones d'instrument 4099 CORELes versions Loud- et Extreme-SPL du 4099 CORE ont toutes deux un diagramme polaire supercardioïde pour une réjection élevée et un gain avant Larsen supérieur. Le micro conserve également une réponse en fréquence hors axe uniforme pour garantir une performance live claire et énergique.Le 4099 CORE est également doté d'un support antichoc amélioré, offrant une excellente isolation des bruits de manipulation et des grondements. Les câbles sont disponibles en version lourde ou légère, selon l'application - les deux sont conçus pour résister aux rigueurs d'une utilisation quotidienne. Une rallonge col de cygne intégrée et polyvalente permet un montage facile et répétable.Les micros peuvent être facilement déclipsés et repositionnés ou déplacés vers un autre instrument. Le système de montage est conçu pour ne jamais abîmer ou rayer la finition de votre instrument. La conception flexible permet une grande variété de montages et de positionnements.Microphone casque subminiature 6066 DPA MicrohponesLa capsule du micro-casque subminiature 6066 CORE ne mesure que 3 mm de diamètre, mais elle renferme la puissance audio de micros DPA plus grands et primés. Malgré sa petite taille, il regorge de clarté, de cohérence et de durabilité - trois qualités qui comptent vraiment. En réduisant notre nouvelle technologie CORE by DPA, nous nous assurons que vous n'avez pas à faire de compromis sur le son pour vous concentrer sur l'esthétique. Au-delà de cette taille réduite et de ce potentiel sonore maximisé, ces micros sont également dotés d'un casque entièrement redessiné, léger et de taille unique qui se fixe sur les oreilles pour un confort maximal. Des griffes d'oreille à 3 points avec des mécanismes à ressort permettent de s'accrocher sous les oreilles et sur le côté de la tête pour plus de sécurité. Un système de perche réglable dans les deux sens (longueur et hauteur) avec un mécanisme anti-rotation rend ce nouveau casque très facile à adapter. Un nouveau système de gestion du câble à 90° protège le câble et le dirige vers le bas du dos de l'utilisateur, où il ne peut être vu.Entre la qualité sonore et le confort, une fois que vous l'aurez essayé, nous sommes sûrs que vous ne voudrez plus jamais porter une autre solution micro-casque.FONCTIONNALITÉS : - Technologie étonnante des capsules 3 mm CORE by DPA- Le son DPA renommé dans une capsule 60% plus petite- Taille unique, le casque s'adapte de manière sûre et confortable.Perche réglable en 2 sens, non réfléchissante, avec système de verrouillage- Système unique et confortable de prise en main en 3 points au-dessus, au-dessous et derrière l'oreille.- Nouvelle gestion du câble à 90° construite pour guider le câble et minimiser les ruptures de câble.CHARACTÉRISTIQUES TECHNIQUES : - Schéma directionnel : Omnidirectionnel- Principe de fonctionnement : Pression- Principe de fonctionnement : Pression- Réponse en fréquence : 20 Hz - 20 kHz- Plage de fréquence effective ±2 dB : 40 Hz - 20 kHz avec soft boost de 4 dB à 8 - 20 kHz- Sensibilité, nominale, ±3 dB à 1 kHz : 6 mV/Pa ; -44 dB re. 1 V/Pa- Niveau de bruit équivalent, pondéré A : Typ. 26 dB(A) re. 20 Pa (max. 28 dB(A))- Distorsion, THD < 1% : 125 dB SPL RMS, 128 dB SPL crête- Plage dynamique : Typ. 102 dB- Max. SPL, THD 10% : 144 dB SPL crête- Impédance de sortie nominale : 30 - 40 - Capacité de transmission par câble : jusqu'à 300 m avec l'adaptateur XLR DAD6001-BC.- Alimentation électrique (pour des performances optimales) : Pour les systèmes sans fil : Min. 5 V - max. 10 V via l'adaptateur DPA- Avec DAD6001-BC : P48 (alimentation fantôme). Fonctionne à partir de 12 V- Consommation de courant : Typ. 1,5 mA (microphone). 3,5 mA avec l'adaptateur XLR DAD6001-BC- Connecteur : MicroDot, TA4F Mini-XLR, LEMO 3 broches, Mini-Jack- Couleur : beige- Poids : 11 g (0.4 oz), câble et connecteur MicroDot inclus- Taille de la tête du microphone (h x l x p) : 3,4 / 8,9 mm (0,13 / 0,35 in)- Diamètre de la capsule : 3 mm (0.12 in)- Longueur du câble : 1,3 m (4,3 ft)- Polarité : Une augmentation positive de la pression sonore produit une tension positive sur la broche du MicroDot.- Plage de température : -40°C à 45°C (-40°F à 113°F)- Humidité relative (RH) : Jusqu'à 90% | |
Royer Labs Sf-24 Stereo Active Ribbon Microphone Professional Home Studio Sf 24 Sf24
Le micro stéréo coïncident SF-24 est la version alimentée par fantôme de notre célè...(+) Le micro stéréo coïncident SF-24 est la version alimentée par fantôme de notre célèbre micro à ruban SF-12. Il combine la séparation et l'image stéréo exceptionnelles et les performances sonores de haute qualité offertes par ce dernier à notre circuit actif pour micros à ruban. Le niveau de sortie du SF-24 ( 38 dB) est supérieur à celui du SF-12 (-52 dB), ce qui lui permet de rivaliser avec les micros à condensateur alimentés par fantôme. Le SF-24 est muni d'un circuit novateur et de transistors de conception spéciale permettant de bénéficier d'un niveau de bruit hyper faible (niveau de bruit induit inférieur à 18 dB).Tout comme le SF-12, le SF-24 est composé de deux micros à ruban appairés montés l'un sur l'autre et formant une paire coïncidente, chacun orienté selon un angle de 45 degrés à partir du centre (configuration Blumlein classique). Les deux rubans de 1,8 micron disposent d'une structure aimant/élément polaire garantissant une réponse en fréquence étendue et linéaire, sans crête ou chute importante, ainsi qu'une réponse transitoire remarquable. Ceci permet d'offrir une réponse en fréquence excellente avec n'importe quel angle de positionnement, ainsi qu'une coloration hors axe minimale.Le câble d'extension du SF-24 est fourni avec un adaptateur en Y muni de deux connecteurs XLR mâle 3 broches (Upper et Lower, pour les capsules supérieure et inférieure, lorsque le micro est placé à la verticale). Gain : Nos micros à ruban actifs (SF-24 et R-122) offrent une sensibilité comparable à celle d'un micro à condensateur, ce qui vous permet d'utiliser pratiquement n'importe quel préamplificateur micro ou préamplificateur de console. Les micros à ruban conventionnels offrent une sensibilité inférieure (de 15 à 30 dB) à celle des micros à condensateur, et ils nécessitent des préamplificateurs micro à gain élevé de haute qualité pour l'enregistrement de sources sonores produisant des niveaux plus faibles (comme les instruments acoustiques et les chants) et les prises d'ambiance des pièces. Le SF-24 dispose de deux circuits de préamplification discrets entièrement symétriques munis d'un transformateur toroïdale à bobinage spécial et de transistors à niveau de bruit ultra faible, pouvant offrir une sensibilité exceptionnelle (-38 dB !). Vous pouvez ainsi utiliser le SF-24 avec n'importe quel préamplificateur et bénéficier de suffisamment de gain pour l'enregistrement de tous les instruments.Il est important de noter que le niveau de sensibilité considérable du SF-24 ne produit pas de bruits de fond. En effet, le gain du SF 24 est entièrement généré par le transformateur toroïdal surdimensionné à bobinage spécial, qui permet de produire cette chose merveilleuse qu'est le gain libre. Le gain au niveau du transformateur est donc plus élevé qu'au niveau de la sortie du micro. Le circuit d'alimentation fantôme n'applique aucun gain et ne produit pas de bruit. Nous avons passé des années à perfectionner ce circuit, dont le brevet est en instance. Adaptation d'impédance : Le circuit actif du SF-24 applique une impédance parfaitement adaptée au ruban, permettant ainsi au micro de fournir son plein potentiel sonore, sans être affecté par les caractéristiques du circuit d'entrée du préamplificateur micro. Grâce à sa sortie faible impédance, le SF-24 peut être connecté à des câbles extrêmement longs, sans aucune perte de qualité.Il est primordial que l'impédance soit parfaitement adaptée pour que vous puissiez tirer pleinement profit des possibilités offertes par les micros à ruban. Une différence d'impédance implique qu'une charge inappropriée est appliquée au ruban, ce qui compromet la performance sonore en provoquant une atténuation des basses fréquences, une perte de texture et une réduction de la sensibilité. Le SF-24 bénéficie d'une impédance adaptée et n'est pas affecté par le préamplificateur. Les performances sonores ne sont donc jamais compromises par les différences d'impédance. De plus, le ruban ne peut pas être endommagé par l'alimentation fantôme, les transitoires électriques ou les câbles défectueux. Enregistrement avec le SF-24 : Tout comme le SF-12, le SF-24 permet des enregistrements stéréo incroyablement naturels, restituant non seulement le son de l'instrument, mais aussi, selon la position du micro, certaines caractéristiques de l'environnement acoustique. De plus, la sensibilité supérieure et le circuit d'adaptation permettent des performances sonores exceptionnelles avec une multitude de préamplificateurs, dans la plupart des environnements acoustiques. Enregistrement mono : La compatibilité de phase est excellente entre les deux capsules du SF-24, ce qui permet de combiner leurs signaux pour enregistrer en mono sans aucun problème de déphasage. Ceci s'avère particulièrement utile lorsque vous devez faire une prise mono d'un champ acoustique étendu, comme lorsqu'un chanteur est constamment en mouvement devant un micro mono. Les deux côtés du SF-24 peuvent également être utilisés séparément en mono.Le SF-24 est le micro par excellence pour le piano classique, les Overheads de batterie, les enregistrements d'ensembles et d'orchestres, une grande variété de percussions, pratiquement tous les instruments acoustiques, les petits ensembles de chants, les chorales, etc. Caractéristiques : - Circuit alimenté par fantôme offrant un niveau de sortie élevé et une impédance adaptée- Micro permettant des enregistrements stéréo (Blumlein et M-S)- Capacité à supporter les niveaux sonores élevés- Aucune distorsion avant les niveaux SPL maximum- Niveau de bruit résiduel hyper faible- Ruban résistant à la chaleur et à l'humidité- Absence de distorsion de phase dans les hautes fréquences- Faces avant et arrière disposant de la même sensibilité- Réponse en fréquence linéaire, peu importe la distance- Transformateur d'adaptation toroïdal à haut rendement- Dispersion magnétique très faible Applications recommandées : - Overheads de batterie- Percussions- Cuivres et bois- Sections de cor- Piano acoustique- Harpe- Chorales- Cordes (solo)- Sections de cordes- Orchestres- Guitares électriques et acoustiques- Choeurs (extrait MP3)- Prise de son d'ambiance- Prise de son stéréo ou mono Caractéristiques techniques : - Principe de fonctionnement : Micro électrodynamique à gradient de pression avec circuit actif- Structure polaire : réponse en 8 croisée- Élément : Ruban en aluminium (1,8 micron)- Réponse en fréquence : 40 Hz - 15 kHz /- 2 dB- Sensibilité : -38 dBv (référence : 1 V/pa /-1 dB)- Niveau de bruit induit : 130 dB- Connecteur de sortie : XLR mâle 5 broches (stéréo*)- Alimentation fantôme : 48 V seulement- Courant d'alimentation : 4 A par canal- Dimensions : 270 mm X 39 mm (base), 25 mm (partie supérieure)- Poids : 583 g- Fini : Noir optique/or 18 carats (en option) | |
DPA 4099-DC-1-101-A
Kit stéréo 2x 4099 CORE Microphone pour accordéon 4099 CORE DPA microphones 4099-DC-1-1...(+) Kit stéréo 2x 4099 CORE Microphone pour accordéon 4099 CORE DPA microphones 4099-DC-1-101-AMaintenant avec la technologie CORE by DPALe 4099 CORE est déjà la norme reconnue pour ce type de microphone et la version CORE ajoute juste une autre couche de qualité sonore qui distance encore plus ce micro de ses concurrents. Le 4099 CORE CORE apporte plus de clarté et de détails à votre musique, sur toute la gamme dynamique. Tous ceux qui recherchent la plus haute qualité sonore devraient choisir CORE - tous les musiciens, les ingénieurs du son en direct et tous ceux qui sont fiers de la qualité audio.CORE de DPA est une nouvelle technologie puissante au cœur des microphones miniatures DPA. Nous avons minimisé la distorsion. Du pianissimo au forte, vous bénéficierez d'une clarté et d'une ouverture accrues. En savoir plus sur CORE by DPA.Du piano à la guitare, des cordes aux bois, des cuivres aux percussions, la série 4099 CORE est aussi impressionnante sur tous ces instruments. Ce modèle de microphone unique peut magnifiquement renforcer un orchestre entier. Vous pouvez déplacer le micro sur un autre instrument ; assurez-vous simplement d'avoir le bon type de pince pour le monter correctement.La série 4099 CORE primée vous offre un son beaucoup plus naturel que n'importe quel microphone ou micro à pince. Ce microphone à condensateur rejette les bruits indésirables et capture avec précision la véritable voix de votre instrument acoustique.Le 4099 CORE CORE est également doté d'une conception améliorée de support antichoc, offrant une excellente isolation des bruits de manipulation et des grondements. Les câbles détachables sont disponibles en version lourde ou légère, selon l'application - les deux sont conçus pour résister aux rigueurs d'une utilisation quotidienne. Une rallonge col de cygne intégrée et polyvalente permet un montage facile et répétable.Certifié IP58Tous les microphones de la technologie CORE by DPA, y compris le 4099 CORE CORE, sont certifiés IP58. Cette durabilité est obtenue grâce à un certain nombre de mécanismes de défense :- Nano-revêtement hydrofuge du couvercle et du boîtier.- Scellement hermétique de l'amplificateur sensible situé au cœur du micro.- Double plaquage or du diaphragme.Le d:vote CORE 4099 CORE est livré avec un connecteur XLR comme adaptateur. Le microphone peut facilement être connecté à un système sans fil via un adaptateur de notre vaste gamme d'adaptateurs sans fil.Les micros peuvent être facilement déclipsés et repositionnés ou déplacés vers un autre instrument. Le système de montage est conçu pour ne jamais abîmer ou rayer la finition de votre instrument. La conception flexible permet une grande variété de possibilités de montage et de positionnement.Vous pouvez acheter un seul 4099, avec ou sans clip pour instrument spécifique, ou vous pouvez choisir un kit conçu spécifiquement pour les applications rock ou classiques. Ces kits se présentent sous la forme d'ensembles de 4 ou 10 pièces combinés avec les adaptateurs, clips et câbles appropriés qui facilitent l'installation de votre scène.Les micros de cette série existent en deux versions. Le 4099, Loud SPL est parfait pour une utilisation sur un large éventail d'instruments - de la flûte à la guitare, et tout ce qui se trouve entre les deux. Avec un SPL maximum, pic avant écrêtage de 152 dB, le 4099, Extreme SPL a été conçu pour être utilisé sur des batteries, des percussions et d'autres instruments très forts comme, par exemple, la trompette. Les deux versions de ce micro ont un diagramme polaire supercardioïde pour une réjection élevée et un gain avant Larsen supérieur. Le 4099 CORE conserve également une réponse en fréquence hors axe uniforme pour garantir une performance live claire et pleine d'énergie.Laissez votre instrument choisir le microLe 4099 CORE CORE a été conçu pour obtenir les meilleures performances de votre instrument, alors assurez-vous de choisir la bonne version. Nous avons créé des clips et des supports pour s'adapter à une large gamme d'instruments populaires. Même si votre instrument ne figure pas dans la liste ci-dessous, il existe probablement une solution qui répondra à vos besoins.Veuillez noter que pour chaque type d'instrument, nous avons présélectionné pour vous les pièces suivantes :- Type de support- Type de microphone, c.-à-d. SPL fort ou extrême Type de câble de microphone ; Ø1,6 mm (0,06 in) ou Ø2,2 mm (0,09 in)- Type d'adaptateur XLR : DAD4099 CORE (avec coupe-bas intégré) ou DAD6001 (sans coupe-bas).Avec chaque paquet, vous êtes instantanément prêt à jouer de votre instrument avec le microphone attaché.Rallonge de col de cygne optionnelleLa longueur standard du col de cygne est de 140 mm (5,5 in). L'unité d'extension de col de cygne en option est également disponible. Elle ajoute environ 50 % de longueur supplémentaire, ce qui permet d'atteindre le point idéal pour certains instruments.Câbles détachablesLes microphones pour instruments de la série 4099 CORE CORE sont équipés de câbles détachables du col de cygne. Il est ainsi plus pratique de monter le micro sur un instrument avant de le connecter. Vous pouvez également choisir entre différentes qualités de câble, ce qui permet d'adapter votre micro à une tâche spécifique. Le câble robuste de 2,2 mm (0,09 in) est idéal pour la sonorisation et les concerts. Le câble miniature plus fin de 1,6 mm (0,06 in) est plus approprié pour un montage personnel sur les instruments. Les deux types de câbles sont solides et durables, avec une âme interne en Kevlar.Changer le support, pas le microLe micro d'instrument 4099 CORE est très adaptable, grâce au large choix d'options de montage ingénieuses proposées. Guitare, cuivres, flûte, piano ; il n'y a aucun problème pour monter le micro sur n'importe quel instrument. Ainsi, trouver un son cohérent pour votre mixage n'a jamais été aussi facile. Le microphone pour instruments d:vote CORE 4099 CORE est livré avec une grande variété de clips pour une utilisation avec des instruments spécifiques. Basse, cuivres, batterie, violon et plus encore !Un peu plus sur les supercardioïdesUn microphone supercardioïde est similaire à un cardioïde - il est plus sensible au son arrivant à l'avant et est moins sensible à l'arrière. Les micros supercardioïdes ont tendance à avoir un angle de sensibilité beaucoup plus étroit - ce qui les rend encore plus focalisés qu'un micro cardioïdenormal. Ce son hors axe sera plus ou moins coloré et amorti - et, en raison de l'angle de focalisation étroit, la zone de son amorti est augmentée de manière significative. La technique unique de la capsule DPA permet cependant de ne pas colorer le son provenant des côtés ou de l'arrière du micro et réduit simplement la sensibilité à ces angles, offrant ainsi des scènes sonores parfaites. La quantité d'amortissement dépend des spécifications exactes du micro.En raison de leur nature, les micros supercardioïdes sont souvent utilisés sur la scène - aussi bien lors de concerts que d'événements parlés, pour capturer le son concentré d'un instrument ou d'une voix. L'angle de sensibilité étroit permet de minimiser le bruit de fond des autres sons sur une scène très fréquentée. Une chose à noter avec les microphones supercardioïdes est l'effet de proximité, qui entraîne une augmentation de la réponse des basses plus le microphone est rapproché de la source sonore. En outre, les micros supercardioïdes sont beaucoup plus sensibles au vent, aux pops et aux bruits de manipulation que les micros omnidirectionnels, il faut donc prendre des précautions pour s'en prémunir.Le système d'adaptateur vous donne de la flexibilité.Les adaptateurs pour systèmes sans fil vous offrent des possibilités flexibles, simples et abordables. Vous n'êtes plus lié à un seul système sans fil. Si les circonstances changent, vous pouvez simplement changer d'adaptateur, au lieu d'encourir le coût d'un tout nouveau microphone. Lorsque vous changez d'adaptateur, vous n'observez aucune perte ou modification de la qualité sonore.Les microphones miniatures DPA fonctionnent avec toutes les principales solutions de microphones sans fil, telles que Sennheiser, Shure, Sony, Wisycom, Lectrosonics, Zaxcom et bien d'autres. L'ingénieux système d'adaptateur de DPA Microphones est unique en son genre dans l'industrie. Il protège votre investissement dans un son fantastique pour les années à venir.AccordéonCette solution micro permet d'obtenir facilement un haut niveau d'isolation sur scène. Elle offre également une qualité de son stéréo propre et transparente avec une dynamique réaliste. C'est un système complet, qui comprend une paire de 4099 CORE CORE for Loud SPL sélectionnés sur la sensibilité à ±1,5 dB près. Les deux clips micro inclus peuvent être fixés de façon permanente à l'instrument à l'aide de vis.Points forts :- Technologie CORE by DPA à l'intérieur- Microphone à condensateur supercardioïde- Supporte les niveaux de pression acoustique élevés- Gain avant Larsen supérieur Montage souple et facile- Souple et facile à monter sur l'instrument Câble détachable et prolongateur de col de cygne polyvalentCHARACTÉRISTIQUES TECHNIQUES : - Diagramme directionnel : Supercardioïde- Principe de fonctionnement : Gradient de pression- Type de cartouche : Condensateur pré-polarisé- Réponse en fréquence : 20 Hz - 20 kHz- Plage de fréquence effective ±2 dB, à 20 cm (7.9 in) : 80 Hz - 15 kHz avec une accentuation douce de 2 dB à 10-12 kHz. Filtre coupe-bas de second ordre à 80 Hz avec DAD4099-BC- Sensibilité, nominale, ±3 dB à 1 kHz : 6 mV/Pa ; -44 dB re. 1 V/Pa- Niveau de bruit équivalent, pondéré A : Typ. 23 dB(A) re. 20 Pa (max. 26 dB(A))- Distorsion, THD < 1% : 128 dB SPL RMS, 131 dB SPL crête- Plage dynamique : Typ. 108 dB- Max. SPL, THD 10% : 142 dB SPL crête- Impédance de sortie nominale : De MicroDot : 30 - 40 . Du DAD4099-BC ou DAD6001-BC : 100 .- Capacité de transmission par câble : Jusqu'à 300 m avec l'adaptateur XLR DAD6001-BC/DAD4099-BC.- Principe d'équilibrage de la sortie : Signal équilibré avec l'adaptateur XLR DAD4099-BC ou DAD6001-BC.- Rapport de rejet en mode commun (CMRR) : > 60 dB de 50 Hz à 15 kHz avec l'adaptateur XLR DAD4099-BC ou DAD6001-BC- Alimentation électrique (pour des performances optimales) : Pour les systèmes sans fil : Min. 5 V - max. 10 V via l'adaptateur DPA, Avec DAD6001-BC ou DAD4099-BC : P48 (alimentation fantôme). Fonctionne à partir de 12 V- Consommation de courant : Typ. 1,5 mA (microphone). 3,5 mA avec l'adaptateur XLR DAD4099-BC ou DAD6001-BC- Connecteur : MicroDot- Couleur : Noir- Poids : Microphone : 17 g (0,60 oz)- Clip de microphone pour accordéon (AC4099) : 5 g (0,18 oz) : Clip de microphone universel pour instrument (UC4099) : 15 g (0,53 oz)- Support pour pied de micro (MS4099) : 27,5 g (0,97 oz) : Support pour griffe froide avec filetage standard 1/4(CS4099) : 5 g (0,18 oz)- Diamètre du microphone : 5,7 mm (0,22 in)- Longueur du microphone : 45 mm (1,8 in)- Longueur du câble : 1,8 m (5,9 ft)- Diamètre du câble : 1,6 mm (0,06 in) / 2,2 mm (0,09 in)- Polarité : +V à la broche MicroDot pour une pression acoustique positive (et broche 2 sur l'adaptateur XLR DAD4099-BC ou DAD6001-BC)- Plage de température : -40°C à 45°C (-40°F à 113°F)- Humidité relative (RH) : jusqu'à 90%.- Longueur du col de cygne : 140 mm (5.5 in)- Tolérance de sélection de la sensibilité (à 1 kHz) : ±1 dB | |
DPA 4099-DC-1-101-MS 4099 CORE clip microphone avec fixation sur pied de micro DPA microhpones 4099-DC-1-101-MS | |
DPA 4099-DC-1-101-CM
4099 Microphone CORE, SPL fort avec pince de fixation microphones DPA 4099-DC-1-101-CM.Mai...(+) 4099 Microphone CORE, SPL fort avec pince de fixation microphones DPA 4099-DC-1-101-CM.Maintenant avec la technologie CORE by DPALe 4099 est déjà la norme reconnue pour ce type de micro et la version CORE ajoute juste une autre couche de qualité sonore qui éloigne encore plus ce micro de ses concurrents. Le 4099 CORE apporte plus de clarté et de détails à votre musique, sur toute la gamme dynamique. Tous ceux qui recherchent la plus haute qualité sonore devraient choisir CORE - tous les musiciens, les ingénieurs du son en direct et tous ceux qui sont fiers de la qualité audio.CORE de DPA est une nouvelle technologie puissante au c ur des microphones miniatures DPA. Nous avons minimisé la distorsion. Du pianissimo au forte, vous bénéficierez d'une clarté et d'une ouverture accrues. En savoir plus sur CORE by DPA.Du piano à la guitare, des cordes aux bois, des cuivres aux percussions, la série 4099 est aussi impressionnante sur tous ces instruments. Ce modèle de microphone unique peut magnifiquement renforcer un orchestre entier. Vous pouvez déplacer le micro sur un autre instrument ; assurez-vous simplement d'avoir le bon type de pince pour le monter correctement.La série 4099 primée vous offre un son beaucoup plus naturel que n'importe quel microphone ou micro à pince. Ce microphone à condensateur rejette les bruits indésirables et capture avec précision la véritable voix de votre instrument acoustique.Le 4099 CORE est également doté d'une conception améliorée de support antichoc, offrant une excellente isolation des bruits de manipulation et des grondements. Les câbles détachables sont disponibles en version lourde ou légère, selon l'application - les deux sont conçus pour résister aux rigueurs d'une utilisation quotidienne. Une rallonge col de cygne intégrée et polyvalente permet un montage facile et répétable.Certifié IP58Tous les microphones de la technologie CORE by DPA, y compris le 4099 CORE, sont certifiés IP58. Cette durabilité est obtenue grâce à un certain nombre de mécanismes de défense : - Nano-revêtement hydrofuge du couvercle et du boîtier.- Scellement hermétique de l'amplificateur sensible situé au c ur du micro.- Double plaquage or du diaphragme.Le d:vote CORE 4099 est livré avec un connecteur XLR comme adaptateur. Le microphone peut facilement être connecté à un système sans fil via un adaptateur de notre vaste gamme d'adaptateurs sans fil.Les micros peuvent être facilement déclipsés et repositionnés ou déplacés vers un autre instrument. Le système de montage est conçu pour ne jamais abîmer ou rayer la finition de votre instrument. La conception flexible permet une grande variété de possibilités de montage et de positionnement.Vous pouvez acheter un seul 4099, avec ou sans clip pour instrument spécifique, ou vous pouvez choisir un kit conçu spécifiquement pour les applications rock ou classiques. Ces kits se présentent sous la forme d'ensembles de 4 ou 10 pièces combinés avec les adaptateurs, clips et câbles appropriés qui facilitent l'installation de votre scène.Les micros de cette série existent en deux versions. Le 4099, Loud SPL est parfait pour une utilisation sur un large éventail d'instruments - de la flûte à la guitare, et tout ce qui se trouve entre les deux. Avec un SPL maximum, pic avant écrêtage de 152 dB, le 4099, Extreme SPL a été conçu pour être utilisé sur des batteries, des percussions et d'autres instruments très forts comme, par exemple, la trompette. Les deux versions de ce micro ont un diagramme polaire supercardioïde pour une réjection élevée et un gain avant Larsen supérieur. Le 4099 conserve également une réponse en fréquence hors axe uniforme pour garantir une performance live claire et pleine d'énergie.Laissez votre instrument choisir le microLe 4099 CORE a été conçu pour obtenir les meilleures performances de votre instrument, alors assurez-vous de choisir la bonne version. Nous avons créé des clips et des supports pour s'adapter à une large gamme d'instruments populaires. Même si votre instrument ne figure pas dans la liste ci-dessous, il existe probablement une solution qui répondra à vos besoins.Veuillez noter que pour chaque type d'instrument, nous avons présélectionné pour vous les pièces suivantes :- Type de support- Type de microphone, c.-à-d. SPL fort ou extrême Type de câble de microphone ; Ø1,6 mm (0,06 in) ou Ø2,2 mm (0,09 in)- Type d'adaptateur XLR : DAD4099 (avec coupe-bas intégré) ou DAD6001 (sans coupe-bas).Avec chaque paquet, vous êtes instantanément prêt à jouer de votre instrument avec le microphone attaché.Rallonge de col de cygne optionnelleLa longueur standard du col de cygne est de 140 mm (5,5 in). L'unité d'extension de col de cygne en option est également disponible. Elle ajoute environ 50 % de longueur supplémentaire, ce qui permet d'atteindre le point idéal pour certains instruments.Câbles détachablesLes microphones pour instruments de la série 4099 CORE sont équipés de câbles détachables du col de cygne. Il est ainsi plus pratique de monter le micro sur un instrument avant de le connecter. Vous pouvez également choisir entre différentes qualités de câble, ce qui permet d'adapter votre micro à une tâche spécifique. Le câble robuste de 2,2 mm (0,09 in) est idéal pour la sonorisation et les concerts. Le câble miniature plus fin de 1,6 mm (0,06 in) est plus approprié pour un montage personnel sur les instruments. Les deux types de câbles sont solides et durables, avec une âme interne en Kevlar.CARACTÉRISTIQUES- Technologie CORE by DPA à l'intérieur- Microphone à condensateur supercardioïde- Gère les SPL élevés- Gain supérieur avant Larsen Montage flexible et facile- Doux et facile à monter sur l'instrument Câble détachable et rallonge de col de cygne polyvalenteCHARACTÉRISTIQUES TECHNIQUES : - Directivité : Supercardioïde- Principe de fonctionnement : Gradient de pression- Type de cartouche : Condensateur pré-polarisé- Réponse en fréquence : 20 Hz - 20 kHz- Plage de fréquence effective ±2 dB, à 20 cm (7,9 in) : 80 Hz - 15 kHz avec 2 dB soft boost à 10-12 kHz. Filtre coupe-bas du second ordre à 80 Hz avec DAD4099-BC- Sensibilité, nominale, ±3 dB à 1 kHz : 6 mV/Pa ; -44 dB re. 1 V/Pa- Niveau sonore équivalent, pondéré A : Typ. 23 dB(A) re. 20 Pa (max. 26 dB(A))- Distorsion, THD < 1% : 128 dB SPL RMS, 131 dB SPL crête- Plage dynamique : Typ. 108 dB- Max. SPL, THD 10% : 142 dB SPL crête- Impédance de sortie nominale : Depuis MicroDot : 30 - 40 . Depuis DAD4099-BC ou DAD6001-BC : 100 - Capacité d'entraînement par câble : jusqu'à 300 m (984 pi) avec l'adaptateur XLR DAD6001-BC/DAD4099-BC- Principe de balance de sortie : Signal équilibré avec adaptateur XLR DAD4099-BC ou DAD6001-BC- Taux de réjection en mode commun (CMRR) : > 60 dB de 50 Hz à 15 kHz avec adaptateur XLR DAD4099-BC ou DAD6001-BC- Alimentation (pour des performances optimales) : Pour les systèmes sans fil : min. 5 V - max. Adaptateur 10 V via DPA, avec DAD6001-BC ou DAD4099-BC : P48 (alimentation fantôme). Fonctionne à partir de 12 V- Consommation de courant : Typ. 1,5 mA (microphone). 3,5 mA avec adaptateur XLR DAD4099-BC ou DAD6001-BC- Connecteur : MicroDot- La couleur noire- Poids : Microphone : 17 g (0,60 oz)- Pince pour microphone instrument pour accordéon (AC4099) : 5 g (0,18 oz) : Pince universelle pour microphone instrument (UC4099) : 15 g (0,53 oz)- Support de pied de micro (MS4099) : 27,5 g (0,97 oz) : Support de sabot froid avec filetage standard 1/4(CS4099) : 5 g (0,18 oz)- Diamètre du microphone : 5,7 mm (0,22 po)- Longueur du microphone : 45 mm (1,8 po)- Longueur du câble : 1,8 m (5,9 pieds)- Diamètre du câble : 1,6 mm (0,06 in) / 2,2 mm (0,09 in)- Polarité : +V sur la broche MicroDot pour une pression sonore positive (et broche 2 sur l'adaptateur XLR DAD4099-BC ou DAD6001-BC)- Plage de température : -40°C à 45°C (-40°F à 113°F)- Humidité relative (HR) : Jusqu'à 90%- Longueur du col de cygne : 140 mm (5,5 po)- Tolérance de sélection de sensibilité (à 1 kHz) : ±1 dB | |
© 2000 - 2024
Home - New realises - Composers
Legal notice - Full version