| Bricasti Design : M10
Pour Bricasti M7- Boîtier usiné à partir d'aluminium anodisé solide- Contrôle jusqu'Ã...(+) Pour Bricasti M7- Boîtier usiné à partir d'aluminium anodisé solide- Contrôle jusqu'à 8x Bricasti M7- Connexion facile via RS422- Affichage simple et précis- Pas d'alimentation séparée nécessaire |
|
| Expert Sleepers : MIDI breakout (4 comments)
Entrée/sortie MIDI pour modules compatibles avec "Breakout Header", tels que Disting mk4,...(+) Entrée/sortie MIDI pour modules compatibles avec "Breakout Header", tels que Disting mk4, General CV et FH-2- Largeur: 4 HP- Profondeur: 27 mm |
|
| Bricasti Design : M7 (17 comments)
100x pré-réglages de reverb- Véritable réverbération stéréo- 12x paramètres par pr...(+) 100x pré-réglages de reverb- Véritable réverbération stéréo- 12x paramètres par programme- 100x mémoires utilisateur- 4x "Favoris" en façade- Entrées sorties MIDI- Entrées sorties numériques 24 bit AES- AES single-wire 192 kHz- 6 puces DSP Analog Devices- Entrées et sorties analogiques XLR symétriques- Format rack 19" - 1U |
|
| XVive : PX-H Hub - Breakout Box
XVive PX-H Hub - Breakout Box; Breakout box for 5 PX-A connections, expands the Xvive PX S...(+) XVive PX-H Hub - Breakout Box; Breakout box for 5 PX-A connections, expands the Xvive PX System by distributing three channels of audio from one PX-B Snake to up to ve PX-A Mixers via Cat 5 cables, for use with one Xvive PX-B Snake, and up to ve PX-A Mixers and EC25 Ethernet cables, if a 9V/2A center-negative DC power supply is plugged into the connected PX-B Snake, it can power up to ve PX-A Mixers through PoE (Power over Ethernet), impact-resistant metal housing, 1x Ethernet input, 5x Ethernet output, weight 691 g / 1.52 lbs, incl. 19" 1U rackmount kit |
|
| Avid : MTRX Breakout Cable 8 AES I/O
Avid Pro Tools Breakout Cable für MTRX 8 AES I/O; optional accessory cable, suitable for ...(+) Avid Pro Tools Breakout Cable für MTRX 8 AES I/O; optional accessory cable, suitable for Art. 580015 Avid Pro Tools MTRX 8 AES I/O card; AES LFHsub to 8x XLR female and 8x XLR male; length: 3 m |
|
| 9.solutions : Barracuda clamp (3 comments)
La pince Barracuda est la pince la plus polyvalente sur le marché- S'adapte aux formes ro...(+) La pince Barracuda est la pince la plus polyvalente sur le marché- S'adapte aux formes rondes, carrées ou plates- Cette pince s'ouvre plus et pince plus fort que la concurrence- Répartition de la surface en contact pour plus de prise- Verrouillage avec goupille- Pince pour éléments de 0 à 60 mm- Charge max: 20 kg- Connexions: 1x réceptacle 5/8", 1x filetage femelle 3/8"-16, 1x filetage femelle 1/4"-20, 2x filetages femelles M6, 4x filetages femelles M5- 1 point d'ancrage pour câble ou élingue- Poids: 550 g |
|
| RME : HDPSe AoX-D
RME HDPSe AoX-D; PCIe x4 audio interface with DANTE-compatible AVB; 512/256/128 channels a...(+) RME HDPSe AoX-D; PCIe x4 audio interface with DANTE-compatible AVB; 512/256/128 channels at 48/96/192 kHz sample rate; Steady Clock; TotalMix; expandable up to four MADI ports (optional expansion card, not included); connectors: 2x RJ45, word clock input and output BNC, AES3 input and output via DB9 to XLR breakout cable, MIDI input and output via DB9 to 2x DIN breakout cable, stereo headphone output 6.3 mm jack; Design: PCIe card |
|
| RME : HDPSe AoX-M
RME HDPSe AoX-M; PCIe x4 audio interface with Milan-compatible AVB; 512/256/128 channels a...(+) RME HDPSe AoX-M; PCIe x4 audio interface with Milan-compatible AVB; 512/256/128 channels at 48/96/192 kHz sample rate; Steady Clock; TotalMix; expandable up to four MADI ports (optional expansion card, not included); connectors: 2x RJ45, word clock input and output BNC, AES3 input and output via DB9 to XLR breakout cable, MIDI input and output via DB9 to 2x DIN breakout cable, stereo headphone output 6.3 mm jack; Design: PCIe card |
|
| DirectOut : Breakout.AN8
Pour la résolution des entrées et sorties analogiques de 8x canaux- Chacun avec DSUB25 (...(+) Pour la résolution des entrées et sorties analogiques de 8x canaux- Chacun avec DSUB25 (format analogique Tascam) 8x XLR mâle, 8x XLR femelle |
|
| iRig Pro Duo I/O
Mobile 2-Channel Audio/MIDI Interface. IK Hardware. IRig Pro Duo I/O makes capturing prof...(+) Mobile 2-Channel Audio/MIDI Interface. IK Hardware. IRig Pro Duo I/O makes capturing professional-quality recordings easier than ever. It works out of the box with all your devices, with included USB-C , USB and Lightning cables for iPhone, iPad, Android and Mac & PC.
Designed and manufactured in Italy, iRig Pro Duo I/O offers 2 combo mic/instrument inputs, with improved Class-A preamps for a wider gain range, 1/4 TRS outputs and a headphone out with independent level control. Monitor direct (for use with video apps) or post-device, to listen back to processed audio. iRig Pro Duo I/O also offers MIDI input & output on 2.5mm jacks, with included breakout cables.
Flexible power options let you run iRig Pro Duo I/O from 2 included AA batteries, USB bus power or an optional power supply.
Features include:
2 combo instrument/mic inputs with Class A mic preamps and phantom power
TRS balanced outputs and headphone out with switchable direct/processed monitoring
Includes USB-C, Lightning and USB cables for iPhone, iPad, Android & Mac/PC
Works with all your favorite recording, podcasting, streaming and social media apps
Runs off 2 AA batteries (included) USB power or optional PSU. |
|
| Marshall Electronics : CV228 HD Lipstick Camera IP67
Marshall Electronics CV228 HD Lipstick Camera IP67; Compact all-weather camera; Diameter: ...(+) Marshall Electronics CV228 HD Lipstick Camera IP67; Compact all-weather camera; Diameter: only 19.5 mm; Length: 62.5mm; suitable for outdoor shooting and environments with dust, dirt, rain, mud or snow; 3G/HD-SDI (BNC); 2.2 Megapixel sensor (1:2.8") (4:2:2 color); 3m breakout cable with BNC (3GSDI), RS485 remote and lockable 12V power connector; Remote adjustment via RS485 (Visca) or OSD menu joystick; compatible with CV-RCP-V2 touch screen; free camera control software; wide range of image adjustment settings including white balance, color, gain control, pedestal (black), white clip, exposure, gamma, image stabilization and more; Technical specifications:; Image sensor: 2.2 megapixels 1 / 2.8" Sony sensor IMX327 (latest generation); Total Pixels: 1981 (H) x 1288 (V) / 2,551,528 (pixels); active pixels: 1944 (H) x 1212 (V) / 2,356,128 (pixels); Scan system: 16:9 progressive scan; Video output: 3G/HD-SDI; Resolution / Frame rates: 1920 x 1080p-60/59/50/30/29/25/24/23.98, 1920 x 1080i-60/59/50, 1280 x 720p-60/59/50/30/29/ 25; Lens mount: 4.0mm F2.0 M12 mount - interchangeable without cap; Electric Shutter: Manual (1/30 or 1/25 ~ 1/30,000 sec); Degree of protection: IP67; Operating Temperature: -10~50 °C; Power Supply: 12VDC 1.0A; Power: 12VDC (7 to 15VDC), max 6W; Dimensions (W x H x D): 19.5 x 19.5 x 62.5 mm; Material: metal; Weight: approx. 195 g with cable |
|
| Botex : Chainhoist Controller CHC-4 (12 comments)
Pour contrôle direct de 4 moteurs de palan à chaîne- Contrôle indépendant possible de...(+) Pour contrôle direct de 4 moteurs de palan à chaîne- Contrôle indépendant possible de chaque moteur- 1,9 kW max. par moteur (2.7 A / 400 V)- 9 kW max. (13 A / 400 V)- Connexion via 4 prises CEE 4 broches ou 1 connecteur multibroches de 16 broches pour Breakout Box- Alimentation: CEE 32 A 400 V / 50 Hz- Format rack 19"/4U- Interrupteur d'arrêt d'urgence intégré- Commutateur de contrôle avec Up/Down et Off par sortie- Bouton Run pour un fonctionnement précis des palans à chaîne connectés- Fusible pour bouton Run et bouton Stop (6 A C)- Fusible principal de 13 A D par canal- 3 voyants de phase lumineux- Dimensions: 483 x 278 x 178 mm- Poids: 8,75 kg- Boîte de dérivation 4 canaux optionnelle non-fournie (N° d'article 472025) |
|
| Botex : CHC-8-B Chainhoist Controller
Botex CHC-8-B Chainhoist Controller Box, motor control for up to eight motorised chain hoi...(+) Botex CHC-8-B Chainhoist Controller Box, motor control for up to eight motorised chain hoists, in convenient carrying case; for directly controlled chain hoists, independent control of up to eight motors possible, max. 1.9 kW per motor (2.7 A / 400 V), maximum total load: 9 kW (13 A / 400 V), connection via four 4-pin CEE connectors or two 16-pin multipin connectors for use with a breakout box, power supply: CEE 32 A 400 V / 50 Hz, integrated emergency stop switch, control switch with up / down and off per output, run button for precise movement of the connected chain hoists, fuse for run switch and stop button (6 A C), main fuse with 13 A D per channel, three phase control lamps, with shoulder strap; dimensions incl. case:524 mm × 423 mm × 203 mm, weight: 12 kg; Matching break-out box for multipin: #472025. |
|
| Yamaha : Stage Custom Hip Shell Set CLW
Stage Custom Series- Matt lacquered 6-ply birchwood shells- Chrome hardware- 1.5 mm Triple...(+) Stage Custom Series- Matt lacquered 6-ply birchwood shells- Chrome hardware- 1.5 mm Triple Flange steel hoops- JSBP0F4HCLW- Colour: Classic White- Includes CL940LB tom holder- 20" x 08" Bass drum- 10" x 05" Tom tom- 13" x 08" Floor tom with 20-spiral snare wires- 13" x 05" Snare drum |
|
| PUR : Vision One Black (1 comments)
PUR Vision One Black, Vision One series, frontplate made of black stained african aningre ...(+) PUR Vision One Black, Vision One series, frontplate made of black stained african aningre wood, resonant body heavy 15mm soundoptimized birchwood with black stained ash veneer, resonant hole on backside with pitch converter to adjust the bass sound, unique snare system allows easy adjustment of the snare sound, clap corners feature another sound option on the corners of the frontplate, clear and direct snareattack over dynamic bass sounds, typically for pur is the good separation between bass and snare sound, handmade in Austria, shipped included PUR cushion and cajon systeminfo, H 47,5cm - W 30,4cm - D 29,9cm |
|
| Purelink : PureTools PT-SW-HD41USB
Made of steel- Inputs: 4x HDMI-A- Outputs: 1x HDMI-A- 1x analogue stereo (3,5mm jack)- Con...(+) Made of steel- Inputs: 4x HDMI-A- Outputs: 1x HDMI-A- 1x analogue stereo (3,5mm jack)- Control ports: 4x host USB (USB-B)- 3x device USB (USB-A, max. 1A) 1x RS232 (3 pin Phoenix), 4x breakout (3 pin Phoenix), 1x firmware (Micro USB)- Max. resolution: 4K UltraHD @60Hz (4:4:1) resolution: 4K UltraHD @60Hz (4:4:4), HDR10, Dolby Vision- Bandwidth: 18 Gbps- Dimensions: 200 x 40 x 100 mm- Weight: 0.685 kg- Colour: Black- 1x PT-SW-HD41USB 4x1 4K 18Gbps HDMI Switcher with KVM and audio decoupling- 1x mounting set (2x mounting ears with 4 screws, 4x plastic pads)- 4x 3-pin Phoenix screw terminals- 1x power supply, 12V/2A |
|
| PUR : Vision Pro Satin Nut
PUR Cajon, Vision Pro Series, frontplate black made of satin nut wood, resonant body: 15mm...(+) PUR Cajon, Vision Pro Series, frontplate black made of satin nut wood, resonant body: 15mm soundoptimized birchwood with black stained ash veneer, heel-off snare system to set snare on/off while playing, system can be stored inside, resonant hole on backside with pitch converter to adjust the bass sound, four built-in "sound windows" on the sides of the cajon gives you extra sound options with different wooden tonesunique snare system allows easy adjustment of the snare sound, clap corners feature another sound option on the corners of the frontplate, clear and direct snareattack over dynamic bass sounds, typically for pur is the good separation between bass and snare sound, handmade in Austria, included PUR cushion and cajon systeminfo, H 47,5cm - W 30,4cm - D 29,9cm |
|
| Rigport : RPL32-MKII Breakout Box
Avec fusible à réinitialisation automatique- Entrée/sortie 32A CEE- 3 prises Power Twis...(+) Avec fusible à réinitialisation automatique- Entrée/sortie 32A CEE- 3 prises Power Twist- Options de montage pour Safety, Standard Coupler, RPLClamp ou colliers de serrage- Indice de protection: IP54 (utilisation en extérieur possible)- Section de conducteur: 6 mm²- Température max.: 55°C- Courant maximum: 3 x 16A Out, 3 x 32A Thru- En tôle d'acier- Dimensions: 321 x 90 x 100 mm- Poids: 1,6 kg |
|
| Endorphin.es : Plus 3
Endorphin.es Plus 3; Desktop Expression and Sustain Controller; 50mm Expression slider wit...(+) Endorphin.es Plus 3; Desktop Expression and Sustain Controller; 50mm Expression slider with TRS jack (6.3mm) for use on the expression inputs of synthesizers, MIDI controllers and effect unit; Sustain button with TS jack (6.3mm) for use on sustain pedal inputs; switchable hold-mode for the sustain button; switchable polarity for the expression jack; included TRS breakout cable for the use with semi-modular synthesizers or Eurorack systems as an attenuator for CV signals and as a manual Gate button; included TRS expression cable (1m) and TS sustain cable (1m); rugged metal enclosure; dimensions (WxDxH): 50 x 110 x 40 mm; weight: 150 g |
|
| Marshall Electronics : CV-BSE-10FT Breakout Cable
Câble adaptateur
Longueur: 3,05 m
Prise Hirose 12 broches vers 1x RS-485, 1x prise d'alim...(+) Câble adaptateur
Longueur: 3,05 m
Prise Hirose 12 broches vers 1x RS-485, 1x prise d'alimentation 12V 2,1 mm et 1x TRS niveau micro/ligne audio
Convient aux caméras CV34X / CV36X / CV50X / CV56X (pas pour CV50X-WP) |
|