| Lr Baggs 2lanthem Microphone Anthem And Piezo And Preamp (1 comments)
Présentation : C'est après 30 ans de recherche que LR Baggs a mis au point un micro capa...(+) Présentation : C'est après 30 ans de recherche que LR Baggs a mis au point un micro capable de capturer l'essence de la guitare.Le micro Anthem LR Baggs est vendu avec un piezo Element. L'Anthem permet d'obtenir un son naturel et il fait ressortir le caractère de la guitare avec une haute résistance au feedback. Alors que, le piezo Element prend en charge les graves que le micro ne capte pas. La balance ajustée au milieu offre donc l'avantage de chacun de ces éléments.D'autre part, l'Anthem libère le naturel du jeu du musicien. Il est donc possible de jouer de la même façon, que l'on soit branché ou non. On trouve aussi au coeur de l'Anthem un nouveau type de micro éliminateur de bruit, qui permet de se débarrasser de tous les sons parasites et indésirables pour ne laisser passer que le véritable son de la guitare. Le micro Anthem est un véritable microphone, en effet il n'utilise aucune technologie de modélisation, c'est donc bien le véritable son de la guitare amplifiée que l'on entend.De plus, le fait que l'Anthem soit placé 3mm au dessus de la table de la guitare permet de bénéficier de l'effet boundary, et donc de réduire les interférences.Fiche technique :Type : Micro pour instrument acoustique Livré avec : - Un micro Anthem - Un boitier de commande : volume, balance, phase et niveau de batterie- Un étui en nylon pour y ranger la pile. - Un Element Actif LR Baggs avec micro piezo et un préampli jack faisant office d'attache courroie- Des bandes double face pour fixer les pièces sans les altérer.Alimentation : Pile 9V, non fournie Fixation :- L'Anthem se place en-dessous et au milieu du chevalet. Il est nécessaire de se servir des bandes adhésives double face pour le fixer, et non de la super glu, qui pourrait endommager le micro.- Le micro piezo se place sous le sillet. - La sortie jack femelle s'insère dans le trou, où se situait l'attache courroie d'origine. Attention : L'installation du jack peut amener à agrandir le trou déjà existant, ainsi il est conseillé de faire installer l'Anthem par un professionnel. - Le boitier de contrôle se place facilement au niveau de la rosace, face intérieure.- Il est conseillé de placer l'étui pour la pile à un endroit facile d'accès. Spécificité : Le boitier de contrôle permet de contrôler le volume et la balance entre le micro et le piezo à l'aide de molettes distinctes, la phase avec un switch, et il vous informe du niveau de batterie grâce aux témoins d'usure. Contrairement à l'Anthem-SL LR Baggs qui permet de contrôler le volume à l'aide d'une molette, et la balance entre le micro et le piezo grâce à une vis de tête cruciforme. |
|
| Acoustic Guitars Pickups Lr Baggs Anthem-sl
Présentation : C'est après 30 ans de recherche que LR Baggs a mis au point un micro capa...(+) Présentation : C'est après 30 ans de recherche que LR Baggs a mis au point un micro capable de capturer l'essence de la guitare.Le micro Anthem LR Baggs est vendu avec un piezo Element. L'Anthem permet d'obtenir un son naturel et il fait ressortir le caractère de la guitare avec une haute résistance au feedback. Alors que, le piezo Element prend en charge les graves que le micro ne capte pas. La balance ajustée au milieu offre donc l'avantage de chacun de ces éléments.D'autre part, l'Anthem libère le naturel du jeu du musicien. Il est donc possible de jouer de la même façon, que l'on soit branché ou non. On trouve aussi au coeur de l'Anthem un nouveau type de micro éliminateur de bruit, qui permet de se débarrasser de tous les sons parasites et indésirables pour ne laisser passer que le véritable son de la guitare. Le micro Anthem est un véritable microphone, en effet il n'utilise aucune technologie de modélisation, c'est donc bien le véritable son de la guitare amplifiée que l'on entend.De plus, le fait que l'Anthem soit placé 3mm au dessus de la table de la guitare permet de bénéficier de l'effet boundary, et donc de réduire les interférences.Fiche technique :Type : Micro pour instrument acoustique Livré avec : - Un micro Anthem - Un boitier de commande : volume- Un étui en nylon pour y ranger la pile. - Un Element Actif LR Baggs avec micro piezo et un préampli jack faisant office d'attache courroie- Des bandes double face pour fixer les pièces de l'Anthem sans les altérer.Alimentation : Pile 9V, non fournie Fixation :- L'Anthem se place en-dessous et au milieu du chevalet. Il est nécessaire de se servir des bandes adhésives double face pour le fixer, et non de la super glu, qui pourrait endommager le micro.- Le micro piezo se place sous le sillet. - La sortie jack femelle s'insère dans le trou, où se situait l'attache courroie d'origine. Attention : L'installation du jack peut amener à agrandir le trou déjà existant, ainsi il est conseillé de faire installer l'Anthem par un professionnel. - Le boitier de contrôle se place facilement au niveau de la rosace, face intérieure.- Il est conseillé de placer l'étui pour la pile à un endroit facile d'accès. Spécificité : Le boitier de contrôle permet de contrôler le volume à l'aide d'une molette, et la balance entre le micro et le piezo grâce à une vis de tête cruciforme.Divers :Notes : Existe aussi avec un boitier de contrôle, qui se place au niveau de la rosace et qui permet de contrôler le volume et la balance entre le micro et le piezo à l'aide de molettes distinctes, la phase avec un switch, et qui vous informe du niveau de batterie grâce aux témoins d'usure. (2LANTHEM) |
|
| the t.bone : Lucan System Multi Clip Bundle
the t.bone Lucan System CC 200 RC Microphone pour instrument à condensateur-
Installatio...(+) the t.bone Lucan System CC 200 RC Microphone pour instrument à condensateur-
Installation facile avec différents supports pour de nombreux instruments différents (non inclus)-
Col de cygne flexible de 120 mm pour un placement aisé sur l'instrument-
Câble détachable avec contact à vis-
Mini-fiche XLR 3 broches pour une utilisation avec les systèmes sans fil t.bone (convient également aux systèmes sans fil Sirus et AKG)-
Directivité : cardioïde-
Réponse en fréquence : 30 - 20000 Hz-
Sensibilité : -38 dB +/- 2 dB-
SPL Max. : 130 dB-
Rapport signal/bruit : 71 dB-
Impédance : 100 Ohm-
facteur de distorsion : |
|
| the t.bone : RB 500 FetAmp Bundle
the t.bone RB 500 Micro à ruban-
Directivité: figure en 8-
Réponse en fréquence: 30 ...(+) the t.bone RB 500 Micro à ruban-
Directivité: figure en 8-
Réponse en fréquence: 30 Hz - 18 kHz-
Sensibilité: -60 dB = 1 mV / Pa (0 dB= 1 V / Pa)-
SPL max: 148 dB-
Ruban aluminium 2" 2 microns-
Filtre anti-pop recommandé (article 164835)-
Pince micro et câble intégré Thomann FetAmp Préamplificateur de microphone-
Amplificateur JFet de classe A à très faible bruit-
Convient pour les microphones dynamiques et à ruban-
2 paires de transistors JFet appairés-
Entrée : XLR 3 broches femelle symétrique-
Sortie : XLR 3 broches mâle symétrique-
Impédance d'entrée : 20 kOhm-
Gain : 28 dB (à une impédance de source de 3 kOhm)-
Réponse en fréquence : 10 - 50000 Hz (+/- 1 dB)-
Nécessite une alimentation fantôme : 24 - 48 V-
Dimensions (L x l) : 77 x 22 mm-
Poids : 35 g-
Développe et produit en Allemagne |
|
| the t.bone : RB 500
Directivité: figure en 8- Réponse en fréquence: 30 Hz - 18 kHz- Sensibilité: -60 dB = ...(+) Directivité: figure en 8- Réponse en fréquence: 30 Hz - 18 kHz- Sensibilité: -60 dB = 1 mV / Pa (0 dB= 1 V / Pa)- SPL max: 148 dB- Ruban aluminium 2" 2 microns- Filtre anti-pop recommandé (article 164835)- Pince micro et câble intégré |
|
| Acoustic Guitars Pickups Lr Baggs Anthem-slcl
Présentation : Le Anthem SL CL est la version destinée aux guitares classiques (cordes n...(+) Présentation : Le Anthem SL CL est la version destinée aux guitares classiques (cordes nylon) de l'Anthem SL.Le micro Anthem LR Baggs est vendu avec un piezo Element. L'Anthem permet d'obtenir un son naturel et il fait ressortir le caractère de la guitare avec une haute résistance au feedback. Alors que, le piezo Element prend en charge les graves que le micro ne capte pas. La balance ajustée au milieu offre donc l'avantage de chacun de ces éléments.D'autre part, l'Anthem libère le naturel du jeu du musicien. Il est donc possible de jouer de la même façon, que l'on soit branché ou non. On trouve aussi au coeur de l'Anthem un nouveau type de micro éliminateur de bruit, qui permet de se débarrasser de tous les sons parasites et indésirables pour ne laisser passer que le véritable son de la guitare. Le micro Anthem est un véritable microphone, en effet il n'utilise aucune technologie de modélisation, c'est donc bien le véritable son de la guitare amplifiée que l'on entend.De plus, le fait que l'Anthem soit placé 3mm au dessus de la table de la guitare permet de bénéficier de l'effet boundary, et donc de réduire les interférences.Fiche technique :Type : Micro pour guitare classique Livré avec : - Un micro Anthem - Un boitier de commande : volume- Un étui en nylon pour y ranger la pile. - Un Element Actif LR Baggs avec micro piezo et un préampli jack faisant office d'attache courroie- Des bandes double face pour fixer les pièces de l'Anthem sans les altérer.Alimentation : Pile 9V, non fournie Fixation :- L'Anthem se place en-dessous et au milieu du chevalet. Il est nécessaire de se servir des bandes adhésives double face pour le fixer, et non de la super glu, qui pourrait endommager le micro.- Le micro piezo se place sous le sillet. - La sortie jack femelle s'insère dans le trou, où se situait l'attache courroie d'origine. Attention : L'installation du jack peut amener à agrandir le trou déjà existant, ainsi il est conseillé de faire installer l'Anthem par un professionnel. - Le boitier de contrôle se place facilement au niveau de la rosace, face intérieure.- Il est conseillé de placer l'étui pour la pile à un endroit facile d'accès. Spécificité : Le boitier de contrôle permet de contrôler le volume à l'aide d'une molette, et la balance entre le micro et le piezo grâce à une vis de tête cruciforme.Divers :Notes : Existe aussi avec un boitier de contrôle, qui se place au niveau de la rosace et qui permet de contrôler le volume et la balance entre le micro et le piezo à l'aide de molettes distinctes, la phase avec un switch, et qui vous informe du niveau de batterie grâce aux témoins d'usure. (2LANTHEM) |
|
| Guitar Preamps Isp Theta Pro Dsp Preamp New Product
Préampli numérique entièrement programmable avec implémentation du logiciel de DSP du ...(+) Préampli numérique entièrement programmable avec implémentation du logiciel de DSP du Theta Preamp pour des gains très élevés et zero aliasing. La puissance de traitement disponible permet à l'algorithme Decimator Time Vector d'obtenir des retombées de notes en sustain très douces et un tracking ultra-rapide. Il a 2 sections, une en pré-distorsion et l'autre en post, chacune avec une égalisation très complète. Il possède des sorties en stéréo pour le brancher à un ampli de puissance et des baffles, des sorties XLR symétriques avec simulation de haut-parleur et une sortie casque également avec simulation. Cette simulation offre les mêmes temps et réponses en fréquence que les amplis vintage avec possibilité d'ajuster le placement de micro. Il possède aussi une librairie d'effets numériques 32 bits incluant wah, compresseur, phaser stéréo, flanger stéréo, chorus à 4 voix, délai 1300ms et réverb studio. Ses 224 presets programmables peuvent être arrangés en 124 songs. |
|
| Lewitt Lct 140 Air Condenser Microphone Lct140
Préférez-vous que votre instrument sonne 100% naturel ou préférez-vous un peu d'éclat...(+) Préférez-vous que votre instrument sonne 100% naturel ou préférez-vous un peu d'éclat en plus Le LCT 140 AIR peut faire les deux. Il présente deux caractéristiques sonores, AIR et FLAT. Vous pouvez facilement passer au son qui correspond à votre objectif. AIR ajoute un éclat haut de gamme, tandis que FLAT reproduit votre son tel quel. Essayez les deux et capturez les performances comme vous le souhaitez.AIR offre un caractère ouvert et étincelant. Le bon choix si vous avez besoin d'un son exceptionnel sans passer de temps en post-production. FLAT fournit une réponse en fréquence linéaire pour la reproduction «telle quelle» des batteries, cordes, guitares acoustiques et ch urs. Il est parfait si vous visez des images sonores réalistes.Les transitoires sont l'ADN du son de votre instrument. Pour conserver la musicalité naturelle de vos instruments, le LCT 140 AIR offre une excellente réponse transitoire. Les caractéristiques naturelles des cymbales sont capturées avec précision. Dans tous les cas, vous obtenez une reproduction percutante mais chaleureuse du son unique de votre instrument.Caractéristiques :- Transducteur à gradient de pression- Directivité : cardioïde- Capsule polarisée de 17 mm- Plage dynamique : 115 dB- Limite de pression sonore : 135 dB- EQ préréglé commutable : Plat / Air- Pré-atténuation commutable : 0 dB / 12 dB- Filtre passe-bas commutable : linéaire ou 80 Hz avec pente de 12 dB / octave- Sortie symétrisée sans transformateur- Livré avec sac, pince pour microphone et bonnette anti-vent |
|