| Palmer : Macht 402 (132 comments)
Especially for electric guitar- Output Power: 2 x 200 W @ 4 Ohm, 2x 100W bridged @ 8 Ohm: ...(+) Especially for electric guitar- Output Power: 2 x 200 W @ 4 Ohm, 2x 100W bridged @ 8 Ohm: 1x 400W @ 8 Ohm- Class D dynamic circuit- Frequency range: 20 - 20,000 Hz- Protection: soft start, short-circuit, DC, overheating, overvoltage- Controls: on/ off, volume, high, low, mode (bridge/ parallel/ stereo), ground lift, limiter sensitivity- Line input: 2x XLR and 2x 6.3 mm jack- Speaker output: 2x speaker twist and 3x 6.3 mm jack- Dimensions (W x H x D): 482 x 44 x 244 mm |
|
| Harley Benton : GPA-400 (214 comments)
Lightweight Class-D technology with switch-mode power supply- 2x 200 W @ 4 Ohm- 2x 100 W @...(+) Lightweight Class-D technology with switch-mode power supply- 2x 200 W @ 4 Ohm- 2x 100 W @ 8 Ohm- 2x 50 W @ 16 Ohm- Bridged 400 W @ 8 Ohm and 200 W @ 16 Ohm- Frequency range: 20 Hz - 20 kHz- Input sensitivity: 335 mV- Damping factor: > 80- Signal- noise ratio: > 90 dB- Total harmonic distortion (thd): < 0.15%- Power consumption: 18 W (standby current)- Dimensions (W x D x H): 482 x 250 x 44 mm- Format: 19"/ 1 HE- Weight: 3 kg |
|
| Seymour Duncan : Power Stage 170 (76 comments)
Suitable for amplifying effect pedals- Small enough for pedalboards- Power: 170 W at 4 Ohm...(+) Suitable for amplifying effect pedals- Small enough for pedalboards- Power: 170 W at 4 Ohms- 3-Band EQ- 13 dB boost/cut in each frequency band- Controls for volume, bass, mid and treble- Power switch on the back- 1/4" mono-jack input/output on the back- Cold device plug on the back- Power status LED- Temperature status LED- O.C. status LED- Output impedance: 4-16 Ohms- Input voltage: 220-240V AC- Dimensions (L x W x H): 127 x 133 x 72 mm- Weight: 910 g- Made in USA |
|
| Seymour Duncan : Power Stage 700 (15 comments)
Suitable for direct connection with effects devices- Power: 700 W @ 4 Ohms/350 W @ 8 Ohms-...(+) Suitable for direct connection with effects devices- Power: 700 W @ 4 Ohms/350 W @ 8 Ohms- 3-Band EQ- 13 dB boost/cut in each frequency band- Speaker simulation- Controls for volume, bass, mid and treble- Power switch on the back- 1/4" Mono-jack (L/R) inputs on the backside- 2 (L/R) Speaker Twist/6.3 mm combo outputs on the rear- 2 (L/R) XLR outputs on the backside- 2 Cab Sim switches (one for each XLR output) on the rear- Cold device plug on the back- Power status LED- Temperature status LED- O.C. status LED- Output impedance: 4-8 Ohms- Input voltage: 100-230V AC- Dimensions (L x W x H): 292 x 176 x 56 mm- Weight: 2.860 g- Made in USA |
|
| Mooer : Baby Bomb 30 W (88 comments)
Complete power amplifier in micro pedal form- Maximum output: 30 W- Suitable for direct co...(+) Complete power amplifier in micro pedal form- Maximum output: 30 W- Suitable for direct connection to effects devices- Delivers pleasant post-stage overdrive at higher volumes- Master volume control- Warm/bright toggle switch for adjusting the presence settings- Status LED- Output impedance: 8-16 Ohms- Power via 24 V DC power supply with 2.1 x 5.5 mm AC adapter and polarity (-) inside (included)- Battery operation is not supported- Dimensions (L x W x H): 94 x 42 x 52 mm- Weight: 144 g |
|
| Mooer : Tube Engine
Suitable for connection directly to effect units- Class A / B tube circuit- Output power: ...(+) Suitable for connection directly to effect units- Class A / B tube circuit- Output power: 20 watts- Suitable for operation of guitar cabinets with 8-16 ohms.- 1 x 12AXz (ECC83) and 1x AT7 (ECC81) pre-amp tubes- 2 x Matched EL84 power amp tubes- 2 x Input gain settings- Transparent warm sound- Controls for master and presence- Hi / Low toggle switch to select the input impedance (Hi = 1 MOhm / Low = 220 kOhm)- Standby toggle switch- Power toggle switch- Front-side 6.3 mm mono jack input- Rear 1 x 8 ohms / 2 x 16 ohm 1/4" Mono-jack speaker outputs- Rear 1 x 16 Ohm 1/4" Mono Jack Speaker Output- Rear IEC AC IEC socket- Rear AC Voltage Switch for Selecting Input Voltage (100 ~ 120V / 220 ~ 240V)- Status LED- Dimensions (L x W x H): 335 x 203 x 91 mm- Weight: 5.25 kg- Includes rack mounting ears and carrying handle |
|
| Engl : E840/50 Poweramp (30 comments)
Power: 2 x 50 W- Tubes: 3x ECC 83 and 4x 5881- Stereo channels: left/ right- Input gain sw...(+) Power: 2 x 50 W- Tubes: 3x ECC 83 and 4x 5881- Stereo channels: left/ right- Input gain switch- Volume control per channel- Presence A and B controller- Standby switch per stereo side- 8 and 16 Ohm output for each stereo channel- Foot pedal connector- Dimensions: 48 x 8.8 x 30 cm- Weight: 12 kg |
|
| MOOER TUBE ENGINE
Amplificateur TUBE ENGINE20W à lampes (EL84) Class A/Bchâssis métal légerpoignée de t...(+) Amplificateur TUBE ENGINE20W à lampes (EL84) Class A/Bchâssis métal légerpoignée de transportlivré avec fixation pour mise en rackdimensions: 33.5 x 20.3 x 9.1 cmpoids: 5.3 kg. |
|
| Guitar Power Amps Engl E 840 Tube Poweramp 840/50 Ampli 2x50w Rack 2u
E 840 Tube Poweramp 840/50ampli 2x50W lampesrack 2U2x 50W (4x 5881)Master A et BPresence A...(+) sssE 840 Tube Poweramp 840/50ampli 2x50W lampesrack 2U2x 50W (4x 5881)Master A et BPresence A et BRéglage Depth A et BEntrée stéréo L/RSorties 8 & 16 OhmsFormat rack 2 unités 19 |
|
| Guitar Power Amps Seymour Duncan Powerstage-200 Poweramp 200 Watts Namm 2020
Vous connaissiez déjà les Powerstage 170 et 700 qui ont réellement fait leurs preuves s...(+) sssVous connaissiez déjà les Powerstage 170 et 700 qui ont réellement fait leurs preuves sur les scènes mondiales.Seymour Duncan annonce au NAMM 2020 un entre-deux, Le PowerStage 200 !Cest un ampli de puissance monté dans un boîtier toujours plus élégant, compact et puissant pour les joueurs qui utilisent des appareils de modélisation, des pédales ou la combinaison des deux.Il possède toutes les fonctionnalités dont vous avez besoin : une alimentation fiable et propre, un égaliseur commutable, une simulation de haut-parleur et des capacités dentrée auxiliaire et de casque pour être le parfait outil de concert, de répétition et de studio. |
|
| Guitar Power Amps Orange Pedal Baby 100 Namm2019 New Product
PrésentationDescription : L'Orange Pedal Baby 100 est un ampli de puissance de 100 W de c...(+) sssPrésentationDescription : L'Orange Pedal Baby 100 est un ampli de puissance de 100 W de classe A/B, compact, doté d'une égalisation deux bandes et d'un réglage de volume. Pensé pour les musiciens en tournée et ceux qui utilisent des processeurs d'effets et/ou des pédaliers à modélisation !Fiche TechniquePuissance : 100 W de puissance sous 8 Ohms70 W sous 16 OhmsContrôles : Réglages du volume, des graves et des aigusImpédance : 1 x 8 Ohms1 x 16 Ohms2 x 16 OhmsSorties : 2 sorties HPPoids : 3,2 kgDimensions (cm) : 30cm x 7.7cm x 19.5cm |
|