| GFI System : Cabzeus Cab Sim/DI
(4 comments)
- Powerful speaker simulator and D.I. pedal- 2 Independent channels- Add a short delay to ...(+) - Powerful speaker simulator and D.I. pedal- 2 Independent channels- Add a short delay to a channel- Mix two simulation channels- Independent volume, and phase control- 2 Operating modes: 2 x speakers or 2 x microphones- Controls: Edge / Center L, Edge / Center R, Simulator, Headphone Level- Switch: Input Gain L & R (0, -20, -30 dB)- LED: Effect On- Footswitch: Effect Bypass- Input L & R (2 x 6.3 mm jack)- Thru L & R: (2 x 6.3 mm jack)- Output L & R (XLR)- MIDI In- Headphone output (3.5mm stereo mini jack)- Power adapter connector (coaxial connection 5.5 x 2.1 mm, negative polarity inside)- Current consumption: 150 mA- Power supply via 9 V DC power supply (not included, matching power supply: Art.409939)- Dimensions (W x D x H): 120 x 90 x 55 mm- Weight: 544 g |
|
| LD Systems : LDI 02
(385 comments)
Active DI Box- XLR/KLI in- KLI link pad -20 dB- XLR out- Ground lift- PAD- Galvanic isolat...(+) Active DI Box- XLR/KLI in- KLI link pad -20 dB- XLR out- Ground lift- PAD- Galvanic isolation- Sturdy metal housing with corner protectors- Battery / phantom power |
|
| DSM and Humboldt : Simplifier Amp/Cab Simulator
(60 comments)
- Pre-amplifier, power amplifier and cabinet simulator- Fully analog preamplifier with 3 c...(+) - Pre-amplifier, power amplifier and cabinet simulator- Fully analog preamplifier with 3 classic voicings: AC-Brit (British Class A 2x12" Combo), American (American Blackface Combo) and MS Brit (British Stack)- Zero watt stereo power amplifier: a precise approximation of the interaction between the power tubes, the output transformer and the global feedback that creates a specific frequency response for various tubes and speakers- 3 Tube voicings: 6L6, EL34 & KT88- Spread Control to get a "double box" sound with realistic physical separation- Stereo speaker simulation with 3 voicings: 1 x 12", 2 x 12" & 4 x 12" and microphone position controller on each side- The speaker simulation can be switched to the jack outputs to use it either as a DI out or with an additional amplifier- Controls: Gain, Volume, Bass, Mid, Treble, Presence, Resonance, Mic Position, Phones Level- Switch: Pre-Amp Voicing: Ac Brit / American / MS Brit- Switch Tubes Voicing: 6L6 / EL34 / KT88- Cab Voicing L & R switch (2 x): 1x 12", 2x 12", 4x 12"- Bags for spread on / off and ground lift- LED: On- Input: 6.3 mm jack- Output L & R: 2x XLR and 2x 6.3 mm jack- FX Send: 6.3 mm jack- FX Return L & R / Mono: 2x 6.3 mm jack- Aux in: 3.5 mm stereo jack- Phones: 3.5 mm stereo jack- Power supply connection: barrel connector 5.5 x 2.1 mm, negative polarity inside- Current consumption: 80 mA- Power supply via 9 V DC power supply (not included - suitable power supply: Art.409939)- Dimensions (W x D x H): 115 x 65 x 55 mm- Weight: 430 g- Made in Chile |
|
| Palmer : PAN 04A
(15 comments)
- Switchable pad: 0/-30 dB- 2 Jack inputs- 2 Jack link outputs- 2 Balanced XLR outputs- Ba...(+) - Switchable pad: 0/-30 dB- 2 Jack inputs- 2 Jack link outputs- 2 Balanced XLR outputs- Balanced XLR mix output- Switchable ground lift per channel- Input impedance: 1 MOhm- Output impedance: 200 Ohm- Max. input level: +45 dBu- Max. output level: +11 dBu- Transformer ratio: 0.125694444- Frequency range: 10 - 40,000 Hz- Operation with external 9-15 V DC power supply or 48 V phantom power supply- Robust metal housing- Dimensions (W x H x D): 116 x 110 x 45 mm- Weight: 0.47 kg- Colour: Black |
|
| Palmer Mi : enz
- Palmer enz; passive 2-channel line isolation box; housing made of extruded aluminum; ide...(+) - Palmer enz; passive 2-channel line isolation box; housing made of extruded aluminum; ideal for hi-fi, presentations and installations; reliably eliminates hum loops and noise signals; no sound losses; galvanic isolation through transformer; with ground lift switch; transformer ratio: 1:1; connections: input: 2x unbalanced RCA, output: 2x unbalanced RCA; no power supply needed; weight: 0.42 kg; dimensions (WxHxD): 50 x 140 x 68 mm; included in delivery: 1x Palmer enz, 1x rubber feet, 1x label (tour label); engineered in Germany |
|
| Proco : CB-1
Passive DI Box- In a strong metal housing for portable applications- Convert from high-imp...(+) Passive DI Box- In a strong metal housing for portable applications- Convert from high-impedance to low-impedance- From instrument connection to microphone inputs- 1x jack in - 1x parallel out, 1x isolated XLR out- High-quality ProCo transformer CBT-1 (20 kOhm / 150 Ohm)- Ground lift switch prevents ground loops |
|
| Behringer : GI100 ULTRA-G
(330 comments)
Active Guitar DI Box- With a speaker emulation developed by Juergen Rath 4x 12"- Jack inpu...(+) Active Guitar DI Box- With a speaker emulation developed by Juergen Rath 4x 12"- Jack input- Direct link out- XLR out- Galvanic isolation- -20/ 40dB PAD (up to 3000 W)- Operatable via battery (9V) or phantom power (15 - 52 V)- Gnd lift- Battery off switch- Rugged floor box with isolating feet |
|
| Palmer : PLI 04 USB
(26 comments)
- Type B USB input for audio transmission with laptop or PC- 1 Adjustable headphone jack w...(+) - Type B USB input for audio transmission with laptop or PC- 1 Adjustable headphone jack with 3.5 mm stereo jack- Switchable monosumming- 2 Balanced XLR outputs- Switchable sample rates (24 bits): 44.1, 48 And 96 kHz for converting USB audio to XLR- Dimensions: 140 x 95 x 35 mm- Weight: 0.68 kg |
|
| Palmer : PGA04-16 Passive Mono DI-Box
(6 comments)- Speaker simulation with load box (16 Ohm)- Design: 19", 1U- 5 Year warranty! |
|
| Radial Engineering : Pro-D8
(7 comments)
- For keyboards and a player device- 2x Jack in per channel- Insert and thru- 15 dB Pad pe...(+) - For keyboards and a player device- 2x Jack in per channel- Insert and thru- 15 dB Pad per channel- XLR out- Switchable GND Lift per channel- 180° Phase reverse per channel- Rotatable rackmount- 19"/1U |
|
| IMG Stageline : DIB-102
(15 comments)
- For signal transmission from musical instruments to mixing console or amplifier- Disturb...(+) - For signal transmission from musical instruments to mixing console or amplifier- Disturbances such as humming loops are avoided by transformer coupling- Galvanically isolated inputs and outputs- 3-Way attenuator switch (0/-20/-40 dB)- Ground lift switch- Instrument loop-through output- Broadband balancing transformer- Frequency range: 15-30000 Hz- Input impedance: 50 kOhm- Output impedance: 600 Ohm (symm.), 50 kOhm (asymm.)- Gain: 0/-20/-40 dB- Gear ratio: 10:1- Inputs: 2 x 6.3 mm Jack, asymmetrical- Outputs: 2 x 6.3 mm Jack, asymmetrical, 2 x parallel out XLR, balanced- Metal housing- Dimensions (W x H x D): 148 x 50 x 130 mm- Weight: 0.76 kg |
|
| Palmer : PLI 04
(71 comments)
- 2x Jack in- 2x RCA in- 1x 3.5 mm Stereo jack in- 2x XLR Balanced out- Especially for hi-...(+) - 2x Jack in- 2x RCA in- 1x 3.5 mm Stereo jack in- 2x XLR Balanced out- Especially for hi-fi equipment and PCs- 5 Year manufacturer's warranty |
|
| Palmer : PMB-L Merge box
(12 comments)
Line summer/merger, isolated signal combiner- Input 1: Balanced XLR/f via a galvanically i...(+) Line summer/merger, isolated signal combiner- Input 1: Balanced XLR/f via a galvanically isolated transformer. Balanced decoupling via resistors. Total resistance: 2 kOhm- Maximum sound level for THD |
|
| Radial Engineering : Pro AV2
(52 comments)
- 2x 6.3 mm Jack for instruments- 3.5 mm Jack and RCA connectors for -10dB consumer hardwa...(+) - 2x 6.3 mm Jack for instruments- 3.5 mm Jack and RCA connectors for -10dB consumer hardware- 2x Balanced XLR out |
|
| ART : Dual RDB
(35 comments)
- Re-amping interface for multiple sources- Stereo / Dual Direct Box- Pad circuitry for mi...(+) - Re-amping interface for multiple sources- Stereo / Dual Direct Box- Pad circuitry for mic / instrument inputs- 2x XLR (balanced) / 1/4 "TRS line inputs- Transformer-balanced XLR output (microphone level)- Transformer-balanced 6.3 mm jack output (instrument)- Frequency response: 20 Hz - 20 kHz- Mute function- Style: Desktop |
|
| Radial Engineering : J 48 Stereo
(25 comments)
- Jack In and Thru- XLR out- Switchable low cut, -15 dB pad and phase reverse- Ground lift...(+) - Jack In and Thru- XLR out- Switchable low cut, -15 dB pad and phase reverse- Ground lift- Requires 48 V phantom power |
|
| Klark Teknik : DI 20P
- Midas transformer- 2x 6.3 mm jack inputs- 2x -15 dB pad switch- Ground lift- Neutrik XLR...(+) - Midas transformer- 2x 6.3 mm jack inputs- 2x -15 dB pad switch- Ground lift- Neutrik XLR outputs- Sturdy, compact aluminium housing with protective, hard rubber corners- Frequency range (±1 dB): 20 Hz - 30 kHz- Input impedance: 500 kOhm (10 kOhm/PAD)- Output impedance: 150 Ohm (at 1 kHz)- Signal-to-noise ratio: 108 dBu- Dimensions (W x H x D): 118 x 64 x 112 mm- Weight: 0.54 kg |
|
| Klark Teknik : DN200 V2 Active DI
(1 comments)
- Neutrik XLR/jack combo sockets with HiZ input- Stereo mini jack input- Phantom power can...(+) - Neutrik XLR/jack combo sockets with HiZ input- Stereo mini jack input- Phantom power can be switched separately for each channel- Sum switch routes both inputs to both outputs- Split switch routes left input to both outputs- 20 dB input pad and ground lift switchable- Dimensions (W x H x D): 118 x 63 x 142 mm- Weight: 0.65 kg |
|
| Telefunken : TDP-2
(5 comments)
- OEP / Carnhill transformer- Switch for pad -15 dB- Switch for ground lift- Solid alumini...(+) - OEP / Carnhill transformer- Switch for pad -15 dB- Switch for ground lift- Solid aluminium construction- WIMA and Nichicon capacitors- Input: 6.3 mm jack (per channel)- Outputs: XLR & 6.3 mm jack (Thru) (per channel)- Metal film resistors 1% 1/4W- Frequency range: 10 Hz - 40 kHz, ± 2 dB- Input-output impedance: > 100 kOhm- Maximum input level: > 18 dBV- Dimensions (W x H x D): 100 x 50 x 100 mm- Weight: 578 g- Made in the UK |
|
| Radial Engineering : J 33
(33 comments)
- With RIAA equalization- Incl. DI box function- Connections: RCA in, RCA jack out, Stereo...(+) - With RIAA equalization- Incl. DI box function- Connections: RCA in, RCA jack out, Stereo- Power via 48V phantom or power supply |
|
ACCESSORIES - STUDIO/LIVE
