| EMG : 1 or 2 Pickups Wiring Kit (164 comments)
- Kit with everything you need for the installation of 1 or 2 active EMG solderless pickup...(+) - Kit with everything you need for the installation of 1 or 2 active EMG solderless pickups- Contains pots with fluted shaft in standard length- Only suitable for active pickups- 2 Volume knobs- 2 Tone potentiometer- 1 Pickup Buss- 1 Power Buss- 1 12B output jack with battery clip- 1 Output cable- 4 Interconnect cable- 2 Pickup cable |
|
| EMG : 45Hz BassPickup (1 comments)
- Passive- Suitable for bridge and neck position- Warm tone with soft attack and wide midr...(+) - Passive- Suitable for bridge and neck position- Warm tone with soft attack and wide midrange- Max. string spacing: 95.25 mm- Housing length: 115 mm- Made in USA- EMG exclusive solderless installation system- 1x 250k volume potentiometer- 1x 250k tone potentiometer- 1x Mono output jack- 2 Pairs of mounting screws- 1x Bridge ground plug- 1x Pick-up cable- 2x Connecting cable- 1x Output cable- 1x Bridge ground wire |
|
| David Gage : The Realist Bass Copperhead (237 comments)
- For 3/4 and 4/4 double bass- With copper-reduction element- Extraordinary pizzicato & ar...(+) - For 3/4 and 4/4 double bass- With copper-reduction element- Extraordinary pizzicato & arco sound achieved by placing the pickup between bridge and sound board |
|
| Fishman : Fluence Bass 5 Soapbar Set (11 comments)
- 2 Active multi-voice humbucker pickups- Splittable- Voice 1: Classic (passive)- Voice 2:...(+) - 2 Active multi-voice humbucker pickups- Splittable- Voice 1: Classic (passive)- Voice 2: Full frequency spectrum (active)- Voice 2: Funk (active with mid contour)- Magnet material: Ceramic- Colour: Black- Includes a 2-band EQ with treble and bass, blend pot, push-pull pot for volume/coil split, 3-way mini toggle switch and material for mounting |
|
| EMG : Geezer Butler PJHZ Black (140 comments)
- Geezer Butler signature set- Passive- 1 P-style split-coil and 1 J-style with specially ...(+) - Geezer Butler signature set- Passive- 1 P-style split-coil and 1 J-style with specially wound split coils for interference-free and hum-free operation as well as more power and volume- Alnico 5 magnets- Solderless connection- Colour: Black- 2x 250k Volume potentiometers- 1x 250k Tone potentiometer- 1 Mono output jack- Mounting screws- 1x Bridge connector- 2x Pickup cable- 2x Connection cable- 1x Output cable- 1x Bridge connection cable |
|
| Seymour Duncan : Quarter Pound 5 BK (11 comments)
- F-style- Passive split coil pickup for 5-string precision bass- Vintage output- 0.25" Al...(+) - F-style- Passive split coil pickup for 5-string precision bass- Vintage output- 0.25" Alnico V rod magnets- 14 kOhm DC resistance- Two-wire shielded connection cable- Sealed airtight with wax- Forbon bobbin- Colour: Black- Handmade in USA |
|
| EMG : J5 Set (14 comments)
- For 5-string J-Style electric bass- Output: Medium- The original EMG J set for 5 string ...(+) - For 5-string J-Style electric bass- Output: Medium- The original EMG J set for 5 string bass, which became an immediate success with its harmonic overtones, pressure and low noise- Classic jazz bass characteristic with a wider sound frequency range- Connections: Solderless- Magnetic material: Ceramic- Cap colour: Black- Made in USA- Includes: EMG exclusive Solderless (solderless) installation system: 2x 25k volume pots, 1x 25k tone pots, 1x battery bus, 1x stereo output socket, 4x pair of mounting screws, 2x pickup cable, 2x connection cable, 1x output cable, 1x battery cable |
|
| Fishman : V-200-Pickup (60 comments)
- Attaches inside the violin bridge- Output jack mounts on the side of the instrument with...(+) - Attaches inside the violin bridge- Output jack mounts on the side of the instrument with chinrest-style hardware |
|
| Sadowsky : Onboard Bass Preamp (32 comments)
- Prewired onboard bass preamp for J-style basses- With a metal control plate- Active prea...(+) - Prewired onboard bass preamp for J-style basses- With a metal control plate- Active preamp for passive pickups- 4-Knob Layout with controls for: Master Volume / Balance / Vintage Tone Control (P/P) / Treble and Bass (stacked)- Push/Pull function on the VTC control for preamp bypass- Can be installed with either the included control plate or with an electronics panel- Frequency esponse: 5 - 50,000 Hz- Bass control offers +18 dB boost at 40 Hz- Treble control offers +18 dB boost at 4 kHz- Total harmonic distortion (THD): 0.18% at 1 kHz- Input impedance: 1 Mohm- Output impedance: 1 kohm- Powered via a 9 V battery (not included)- Power consumption: 9 mA- Installation depth: 29 mm- Dimensions of motherboard (L x W x D): 30 x 21 x 25 mm- Up to 870 hours of battery life |
|
| Journey Instruments : JourneyTek Passive 3-piezo (26 comments)
- Construction: Undersaddle Piezo- Installation does not require any changes except drilli...(+) - Construction: Undersaddle Piezo- Installation does not require any changes except drilling for the trim socket and gluing the elements to the bridge plate- 3 symmetrical, German-made ceramic piezo elements, each 20 mm in diameter- Incl. Trim socket |
|
| Lollar : J-Bass 5S Set (5 comments)
- 2 Single coils- Output: Vintage- Full, clear sound- Reverse-wound, reverse-polarity (RWR...(+) - 2 Single coils- Output: Vintage- Full, clear sound- Reverse-wound, reverse-polarity (RWRP) technology for humming suppression when both pickups are combined- Shed wax- Connections: 2-Wire- DC resistance: Bar 10.0 kOhm - throat 9.1 kOhm- Magnetic material: AlNiCo 5- Cap colour: Black- Hand-wrapped in USA |
|
| EMG : P5J-Set (2 comments)
- Consisting of P-style and J-style for 5-string electric bass- Provides players flexibili...(+) - Consisting of P-style and J-style for 5-string electric bass- Provides players flexibility and a wide range of tone combinations- Incl. Solderless installation material |
|
| Fender : Vintage P-Bass Bridge Cover (207 comments)- Colour: Chrome- Hole spacing: 10 cm |
|
| Headway : The Band Violin (76 comments)
- For a natural sound with a large dynamic range- Easy installation without drilling or mo...(+) - For a natural sound with a large dynamic range- Easy installation without drilling or modifications to the instrument- Warm, clear sound- No disturbing bow noises- Batteries or a preamplifier are not required- 6.3 mm Jack socket |
|
| Höfner : Pickup H511-TAB (4 comments)
- Humbucker- Fits most Höfner basses from 1965 - 1967- Standard tab assembly- Dimensions:...(+) - Humbucker- Fits most Höfner basses from 1965 - 1967- Standard tab assembly- Dimensions: 66 x 32 x 14.5 mm |
|
| Fishman : Full Circle 6X 1mm (50 comments)
- For 6x 1 mm metric thread- Pickup encased in a solid aluminium height adjuster wheel, mo...(+) - For 6x 1 mm metric thread- Pickup encased in a solid aluminium height adjuster wheel, mounted between bridge foot and midsection- Fine-tuning feature via adjuster wheel lets you quickly choose between an open, resonant response or a more focused tone to match your instrument style- With jack output socket- Suitable for the following bridge models: Art.282255, Art.282254, Art.117188, Art.424308, Art.421809 (not included) |
|