The 5051 combines a classic three band EQ based on Rupert’s vintage designs with the power and flexibility of the Portico II compressor. Utilizing a fully-discrete, class-A signal path and high performance input and output transformers, the 5051 delivers the performance and musicality expected from a Rupert Neve Design.The EqualizerThe EQ design on the 5051 evokes sonic similarities with some of Rupert’s classic EQs. The 5051 uses a custom tapped inductor with selected capacitors to form the mid range equalizer band, and the shelf curves are based on Rupert’s vintage modules, including very similar frequency choices. Each EQ section also uses low feedback class-A discrete electronics to prevent low level artifacts and harshness from detracting from the tonal shaping. The EQ, however, is a modern design with advantages offered by techniques that were not possible 35 years ago along with improvements in electronic components currently available, and should not be considered a clone – it just has heritage.Both the High and Low Band can be switched from Shelf to Peak curves and offer 15 dB of boost or cut. The High can be switched from 8 kHz to 16 kHz and the Low Band selected at 35 Hz, 60 Hz, 100 Hz or 220 Hz. The inductor based Mid Band offers 6 center frequencies; 200 Hz, 350 Hz, 700 Hz, 1.5 kHz, 3 kHz and 6 kHz. The Mid Band also has a High Peak switch to narrow the bandwidth or increase the Q of the filter. The 5051 includes an 18 dB/octave High Pass Filter with two corner frequencies on a lit button that toggles through “OFF, 60 Hz then 120 Hz indicated by a blue or red LED respectively. Additionally, the EQ can be switched Pre or Post the compressor. Normally the EQ precedes the compressor but the order can be selected so that the EQ follows after the Compressor. The 5051 also has two XLR balanced inputs that can be switched from the front panel. This allows the user, for example, to have a mic preamplifier and line input from a DAW to be pre-patched and easily selectable.The CompressorThe 5051 Compressor also features a discrete class A signal path proven used in the Portico Series, withindividually controllable threshold, attack, release, makeup gain, ratio, side chain HPF, Feed-Forward / Feed-back selection and Peak/RMS detection modes. With the compressor inactive, the 5051 may be used as a transformer-coupled, high-performance line amplifier, and two 5051′s may be linked for stereo operation as well.How the Compressor WorksIn order to control gain, a V.C.A. or Voltage Controlled Amplifier (or Attenuator) is used. There are many types of V.C. including the use of tubes, discrete and integrated solid state circuits and naturally non-linear devices, each one having its characteristic behavior that reflects sonically on the final performance, and gives it a character or signature that can be musically attractive or not! The Portico 5051 compressor makes use of a very accurate, low noise, low distortion V.C.A. having, essentially, no signature of its own.A part of the audio signal is rectified and smoothed to produce a suitable control voltage for the V.C.A. which has to respond very quickly and have low distortion. If the response is too fast, low frequency signals will themselves, be gain controlled! If the response is too slow, the signal will overshoot and the first few cycles will not get compressed. The speed and accuracy of the response, known as the “attack”, and the time frame that gain remains under the initial control, known as “release” or “recovery” and plays a large part in the way a compressor sounds.Feed-Forward or Feed-Back The 5051 also has the ability to switch between feed-forward and feed-back modes. If the V.C.A. Control voltage is taken from the 5051 output, (i.e. after the V.C.A.) it cannot act immediately on the V.C.A. because it has already been modified by settings of the V.C.A. and circuits through which it has passed. This is known as a “Feed-Back” compressor. The two compression characteristics are quite different; there is more “Overshoot” and both the attack and recovery ramps are changed, providing the user with powerful choices. In most of Mr. Rupert Neve earliest designs, feed-back detection controlling the VCA with a rectified voltage from the unit output was intrinsic to the musical dynamic response. However, the very nature of a feedback compressor limits the attack time of the compression circuit. To offer faster, more technically accurate response times, feed-forward detection was implemented on Mr. Rupert Neve’s more modern designs. With the FF / FB switch, both classic and modern VCA responses are available. Ratio and ThresholdAbove a given “THRESHOLD” signals are reduced by an adjustable amount ranging from 1:1, (which is linear, or no reduction at all), to more than 40:1 which is a very high ratio, equivalent to that of a Limiter. RATIO is sometimes referred to as “Slope” because when depicted on a graph, the slope of the graph representing Output versus Input, is what changes.Ratio and Threshold are closely inter-dependent. If a RATIO as high as 40:1 has been set, then if the THRESHOLD is set at 0 dBu, even when a massive signal of +40 dBu (unlikely!) is presented to the input, the output signal will only be +1 dBu. RATIOS as high as this would normally be set somewhere above 0 dBu – say at +14 dBu, in order to prevent the output signal level exceeding just over +14 dBu to protect, for example, a digital recorder. Similarly, if a RATIO of 5:1 has been set, an input signal which is 10dB above THRESHOLD will only rise by 2dB above that THRESHOLD at the output.THRESHOLD control covers the Range from below -30dB to +22dBu. When THRESHOLD set at a low level, with a fairly high RATIO the amount of gain reduction will be considerable and it may be necessary to use some GAIN after the compressor to restore the apparent signal level.Attack TimeThe ATTACK time is the time taken for the compression circuits to start compressing. A long ATTACK time allows short duration peaks to “escape” and go through uncompressed. This may cause overload on subsequent digital circuits. A very short attack time sounds un-natural and robs the signal of “life” by removing transients. Some transients are extremely fast and have little effect on the sound quality. Setting a long attack time often means that almost no gain reduction occurs because the transient is history (!) before compression has had time to operate. However, even the fastest circuits take time to operate which means that there is always some “Overshoot”. Small amounts of “Overshoot” are musically desirable – there are exceptions, of course.Setting the right values of RELEASE and ATTACK is what compression is all about! Once the principles are understood a Compressor-Limiter such as the 5051 provides a powerful tool that actually appears to enhance the dynamic range of a recording and so provide greater musical enjoyment.Release / RecoveryThe notes above explain how the 5051 handles signals of constant amplitude such as pure tones. Real program signals, however, are continually changing in level. The way in which a compressor deals with actual program material depends upon the magnitude and duration of peaks in the program level.If the RELEASE TIME is set to be very short, a short duration signal will be compressed but the gain will return to normal very quickly, giving a fluctuating and un-natural sound known as “Pumping” when the background, or other signals, are forced up and down. The gain will also tend to follow the wave form of low frequency signals. RELEASE TIME should be set long enough for the gain to remain reasonably constant between each bass note or between speech syllables.The Power SupplyThe 5051 is intended for 5088 consoles or 5285 vertical frames. There are two +/- 24V power supply options; The 5-way supply is designed to sit in the bottom of a rack, and the 25-way supply is a 2U enclosure. The external +/- 24V supply provides exceptionally clean power, and reduces heat build-up within modules associated with DC-DC up-conversion.

The Shelford 5052 echoes the simple and definitive 1073 feature set with a vertically-oriented mic pre, high pass filter, and 3-band inductor EQ, while also incorporating modern capabilities like the variable Silk / Texture control from the Portico II Series and simultaneous pre / post “tape” operation. Utilizing class-A, discrete, +/- 24V topologies with custom-wound transformers and inductors, Rupert Neve designed the 5052 as a vintage-style channel strip that captures the soul of his classic designs, without the previous compromises.The Mic PreLike Rupert’s designs from his time in Shelford, the 5052 preamplifier has 72dB of discrete, class-A gain coupled with serious square-core transformers. Unlike the classics however, the output transformer features the Silk Red / Blue and Texture controls from the Portico II Series to hone the harmonic content and tonality of the output stage. By engaging these controls and sufficiently driving the output, the 5052 can produce up to 4-5% THD (primarily 2nd order, some 3rd order), bringing a richness and thickness to tracks when desired with no danger of overloading the output stage. With Silk disengaged, the output is modern and pristine, yet still retains Rupert’s signature larger-than-life transformer sound. The mic pre section also includes a sweepable 20-250Hz high-pass filter, Mic / Line selection, 48V phantom power, and polarity reverse.Dual I/O PathsFollowing the preamplifier, the 5052 has a transformer-coupled output, which allows the 5052 to feed a tape machine or DAW directly from the mic pre while still using the EQ and Silk / Texture in a dedicated analogue mix path such as that found with a 5088, 5060 or vintage console. This output can also be used to insert a separate compressor between the mic pre and the EQ, or it can allow the 5052 to work with two separate sources. When the “TO EQ” button is engaged, the mic pre signal is routed directly into the EQ such that the mic / line input signal flows through to the main output as a single channel strip.The “best of the classics” EQThe 3-band, custom-tapped inductor EQ on the 5052 was inspired by RND’s favorite portions of Rupert’s vintage EQ designs. The low frequency band is primarily based on the 1064, which is renowned for its creamy, resonant bass. Unlike the 1064 however, the LF band on the 5052 can be used as either a shelf or a peak filter, adding punch, dimension, and immense control to your low end. The 5052’s inductor midrange band is based on his prized 1073 EQ, which is ideal for sweetening vocals and instruments while bringing them forward in a mix. Additionally, the mid frequency band’s proportional “Q” response makes it well-suited for minimizing problematic frequencies in a source. The 5052’s high frequency band is a hybrid vintage / modern design, blending inductor circuitry from the 1073 with capacitor-based topologies to achieve the vintage tones with enhanced control. As Rupert originally intended with his most prized classic designs, each EQ section uses low-feedback, class-A discrete electronics to prevent low-level artifacts and harshness from detracting from the tonal shaping. The EQ circuit itself, however, is a decidedly modern updated design using techniques and components that were simply not available 35 years ago, and should not be considered a “clone”.Power, Connections and MountingThe 5052 receives +/- 24V rails from an external DC power supply using a 4-pin connection. There are currently two options available: the RND 5-way brick supply and the RND 25-way 2U rack-mount supply. The back panel of the 5052 includes three XLR-F connections for Mic In, Line In, and EQ In, and two XLR-M connections for Mic Out and Main Out. The 5052 chassis is a “half-rack” format, and can be mounted in RND’s new 2 –way and 4-way vertical racks in addition to the existing 9-way racks and the 5088 penthouse.

Active 300-Watt 2-Way 10 PA Speaker System with Wireless Option B110D - High-power 300-Watt 2-way PA sound reinforcement speaker system for live and playback applications - Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels - Wireless-ready for high-quality BEHRINGER digital wireless system (not included) - Ultra-low noise Mic/Line input with Volume control and Clip LED - Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection - Additional Line output allows linking of additional speaker systems - Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight - Extremely powerful 10'' long-excursion driver provides incredibly deep bass and acoustic power - State-of-the-art 1'' phenolic compression driver for exceptional high-frequency reproduction - Ultra-wide dispersion, large-format exponential horn - Additional Line output allows linking of additional speaker systems - Versatile trapezoidal enclosure design allows different positioning: - Stand mounting with 35-mm pole socket - Tilts on its side for use as a floor monitor - Ergonomically shaped handles for easy carrying and setup - Conceived and designed by BEHRINGER Germany The EUROLIVE B110D is a super-compact, exceptional 2-way, 300-Watt PA sound-reinforcement loudspeaker with Wireless Option that is ideal for live sound, portable PA, monitor wedge and House of Worship applications. This amazingly-versatile active loudspeaker is ultra-lightweight thanks to our revolutionary Class-D amplifier technology and it comes Wireless-ready for use with our incredible ULM Digital Wireless Microphones. A convenient Line Output allows you to connect multiple B110D speakers, or any of our other high-quality active loudspeakers. Sound reinforcement has never been so easy! Own the Stage with Digital Wireless Get wireless-ready with the built-in, dedicated connectivity of our ULTRALINK ULM Series wireless microphone system (to be ordered separately). Wireless gives you maximum freedom and mobility without the need to run cables. The highest-quality sound is provided thanks to the ULM s digital, license-free 2.4 GHz frequency spectrum. The ULM wireless system combines professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Just plug in the ULM receiver dongle , and instantly you have an exceptional wireless mic system. Freeing you from cables is the simply easy way to own the stage. Front End Flexibility Flexibility rules the day on the B110D, with input options for your choice of an ultra-low noise Mic or Line input with a dedicated Volume control and Clip LED. Tone shaping options such as a dedicated 2-band EQ plus integrated sound processor are included for the ultimate in system control, as well as speaker protection. The additional Line Output allows you to connect multiple B110D units, or any of our other high-quality active loudspeakers. Class-D - Massive Power, Perfect Sound Thanks to our revolutionary Class-D amplifier technology, we are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely-powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment. Superb Sound Quality The B110D features a powerful 10 long-excursion low-frequency driver for solid bass, a 1.35'' aluminum-diaphragm compression driver mounted on an ultra-wide dispersion, large-format exponential horn for crystal-clear high-frequency reproduction. These speaker components were designed specifically as a perfect match for the amplifiers that drive them, ensuring excellent performance and amazing sound every time! Future Proof Versatile and extraordinarily user-friendly, the B110D offers convenient expandability, allowing your sound system to grow as your coverage requirements change. Thanks to the trapezoidal enclosure design, the B110D can also be used as a monitor wedge, making this solution ideal for a wide range of applications. The additional Line Output allows linking multiple speaker systems to form a larger array, and the 35-mm pole socket allows mounting on speaker stands at the optimal height for maximum coverage. As your system needs grow, you can easily pole mount your B110D speakers atop a pair of B1200D Active Subwoofers to add some serious bottom-end to your mix. The B110D features the highest-quality components throughout and the exceptionally-rugged chassis and enclosure build ensures many years of top-notch performance. When you add it all up: superb sound quality; high output power; lightweight portability and scalability plus wireless mic ease-of-use and rugged-durability, the EUROLIVE B110D will elevate your sound-quality to the next level.

''This Mug will always remind you to Keep Calm & Play Music. Express your musicality and individuality with this great-looking Mug that will remind you not to get the blues.''With a strong black colour and the classic Keep Calm design, this Mug would be a fantastic gift for any musician or lover of music, to make sure that they always remain calm and drink a nice hot drink while playing some quality music. / [Mug - Keep Calm & Play Music (Black)] / Mug /

Table de mixage Rotary 4 canaux, isolateur de fréquences 3 voies pour DJ Omnitronic TRM-422OMNITRONIC TRM-422: THE ROTARY MIXER ON A NEW LEVELOmnitronic\'s popular TRM series has been expanded: the TRM-422 combines all the proven features of the previous models, but additionally offers functions that numerous fans had wished for. During the development of the mixer, the focus was on the demands and suggestions of the community.FULL CONTROLEach of the 4 input channels has 2 line inputs, one of which can become a phono input at the touch of a button. The channels are each equipped with a volume as well as a gain control. In addition to the master isolator (bass, mid & high), the DJ has the option to activate a filter with HPF, BPF, LPF, resonance and sweep controls in each of the 4 input channels.The master output is available to the DJ in both XLR and RCA versions.EFFECT WAYSThe use of external effect devices is possible through an FX-In and FX-Out via 6.3 mm jack. The mixer\'s master insert is also equipped with a send & return (unbalanced) path. This allows additional external effects to be looped into the mixer.DVS INTEGRATIONThe mixer\'s timecode outputs allow easy integration of a DVS system (Digital Vinyl System) such as Traktor or Serato.MONITOR SECTIONThe booth output of the TRM-422 is provided with one XLR and one RCA connector. The signal of the booth output can be easily adjusted to the conditions in the DJ booth with the help of an EQ (High & Low).MICROPHONE INPUTSThe TRM-422 offers 2 microphone inputs. The first mic input gives the DJ the ability to modify the mic signal with EQ (high & low).BACKUP SOURCEWith the help of the AUX input on the front panel, players such as smartphones, tablets or MP3 players can easily be connected via mini-jack (3.5 mm) and thus serve as a backup solution.ACTIVATABLE CROSSFADERIf you don\'t want to do without a crossfader during your DJ set, you have the option to assign each of the 4 channels to the integrated crossfader. If the crossfader is not used, it can easily be switched off.SET RECORDINGThe RCA record-out makes it easy to record your own DJ set.FEATURES :- 4-channel rotary mixer with 3-band frequency isolator and filter section for DJs- 3-band master frequency isolator with vintage ALPS potentiometers (Blue Velvet RK27)- Kill cut feature allows DJs to completely remove low, mid and high frequencies for amazing mixing- Filter section with HPF, BPF, LPF, resonance and sweep control for creative sound shaping- 4 stereo input channels with gain control, clip LED, 3-way equalizer and phono/line switching- 2 microphone input channels with gain control, 2-way equalizer on air switch- High-grade components ensure long life and excellent sound quality- 16-digit stereo LED level meter, switchable between master and booth outputs- Booth output with separate 2-way equalizer and level control- PFL section with 16-digit stereo LED level meter, level control, PFL/master mix control and cue mix/split option- Fully assignable VCA crossfader with adjustable curve- 2 effects send/return paths- 4 direct outputs for Timecode applications- Inputs: 8 x line and 4 x phono (RCA L/R), 1 x front aux (mini jack)- Outputs: master and booth (XLR/RCA L/R), record (RCA L/R), master insert send/return (RCA L/R), FX in/out (stereo jack)483 mm rack installation possible with supplied mounting brackets- Desktop console housingTECHNICAL SPECIFICATIONS :- Power supply: 100-240 V AC, 50/60 Hz- Power consumption: 24 W- Protection class: Class I- Power connection: Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided)- Frequency range: Microphone 20 - 20000 Hz- Line 20 - 20000 Hz- Phono 40 - 18000 HzS/N ratio: >97,2 dB line>91,7 dB MicrophoneTHD: Line

DOCtron IMC-500; Instant Mastering Chain in 500-sries module size; compact analog stereo master bus processor for live and studio applications; adjustable input level (0dB to -10dB); 2-band shelving equalizer (60Hz and 12kHz) with +/- 14dB of boost/cut and bypass switch; VCA compressor (THAT) with controls over threshold, ratio (1:1.5 bis 1:10), attack and release (with selectable auto-mode); compressor sidechain switchable from Feed Forward (FF) to Feed Backward (FB); saturation stage with Lundahl transfomer and controllable drive-amount and output level; switchable true bypass; dynamic range: 108dB (A); signal to noise: -104dB (A); total harmonic distortion (THD): 0.0099%; max. output level: +24dBu; form factor: API 500-series module (occupies two slots)

Le Warm Audio BUS-COMP est un compresseur à VCA deux canaux, stéréo, inspiré par les circuits classiques qui depuis des dizaines d’années produisent un son doux et velouté. Les compresseurs stéréo à VCA contrôlent parfaitement la dynamique sur beaucoup de sources, mais ils doivent surtout leur reconnaissance à leur touche magique sur les mixages stéréo.Le BUS-COMP fonctionnera parfaitement sur les mixages stéréo, bus de batterie, overheads, guitares acoustiques, claviers, pianos, instruments d’orchestre, voix off. Le BUS-COMP est principalement conçu pour fonctionner en stéréo, mais il peut être aussi efficace sur des sources mono individuelles. Les compresseurs à VCA de ce type sont devenus populaires pour leur habilité à contrôler la dynamique sans effort mais aussi pour ajouter de la profondeur et de la couleur au signal audio, même lorsqu’aucune compression n’est appliquée.Recréer la technologie des compresseurs à VCA était au centre de la conception du BUS-COMP, cependant, l’ajout d’options et d’améliorations était aussi important durant son développement. Une des caractéristiques du BUS-COMP est d’avoir des transformateurs fabriqués aux USA par CineMag dans le chemin du signal, amplifiés par des ampli-op entièrement discrets. Avec un simple appui sur le bouton en façade, ces transformateurs custom fabriqués aux USA sont insérés dans le chemin du signal, augmentant la profondeur et le grain du son.Caractéristiques :- Compresseur stéréo à VCA, analogique- Peut s’utiliser en mono ou stéréo- VCA THAT 2180- Ampli-op discret- Transformateur CineMag USA commutable- Sidechain externe commutable- Filtre passe-haut commutable : 30, 60, 105, 125, 185 Hz- Commutateur de compression pour faciliter la comparaison avec et sans- Entrées et sorties en jack 6,35mm TRS et en XLR- Impédance d’entrée : 10 kOhms- Impédance de sortie : 50 Ohms- Niveau de bruit : < -90 dBu- Headroom : > +29 dBu, 20 Hz – 20 kHz- Plage dynamique : > 120 dB- Réponse en fréquence : 18 Hz – 22 kHz- THD + bruit, 20 Hz – 20 kHz, entrée +20 dBU :

Ultra-Flexible 8-Channel Microphone Splitter. When it comes to connectivity on the stage or in the studio, you can never have too much and that s where the ultra-flexible MS8000 8-Channel Microphone Splitter makes all the difference. The MS8000 provides the ideal solution for live and recording musicians who need to send signals to multiple locations, including mixing and recording consoles, In-Ear-Monitors (IEMs), floor wedges, broadcast trucks and much more. With 8 Inputs and 16 Outputs, the MS8000 easily connects you to the Front of House (FOH) console and sends duplicate signals to your choice of destination devices. Features - Ultra-low noise 8 in/16 out microphone splitter - Each channel features Direct and Link outputs - Output ground lift switch per channel - Flexible input link switches - Phantom power link to Direct Outpu - Conceived and designed by BEHRINGER Germany

An extra addition to the Pop the Question series 52 more cards to add to your collection! The ultimate Pop trivia card game, with a host of new artists and bands for you to identify! Guess the identity of the artist or band from the clues on the cards. The first player to guess wins that card and whoever has the most cards at the end of the game is declared the winner.Test your friends and family to find out who is the biggest music fan of you all! For 2 or more players or teams aged 7 and upwards. / Jeu /