Thomann
Brand:
Clearsonic
Description from Thomann :
Clearsonic A2466x6 Drum Shield 6-Segment panel
- For live and studio applications
- Noise and sound shielding of drum kits, amplifiers or instruments
- Easy handling by folding accordion-style hinge
- Made out of high quality laser-cut acrylic
- Consists of 6 panels with connectors (Hinges)
- Thickness: 6,35 mm
- Height: 1670 mm
- Width: 600 mm
- Indispensable for volume control on the stage and in the studio for a clean mix
- Weight: Approximately 46 kg
Clearsonic AX2412x6 Extender Panel Extension
- Panel to extend A2448 and A2466 panels
- Made of high-quality, laser-cut acrylic
- Consisting of 6 panels with hinge and 6 H-channels
- Dimensions per panel (H x W): 300 x 600 mm
- Thickness: 6.35 mm
- Illustrations show the panels partly with protective foil
2x Clearsonic S2466x2 Sorber Two-Section Absorber Panel
- Made of compressed fibreglass and encased in dark gray cloth
- Both panels are joined together with a fabric tape and can be used freestanding
- The panel can also be mounted on the inside of the acrylic ClearSonic shields to reduce the amount of reflected sound, or used as sound absorbers on the walls of a studio, basement, church etc.
- Dimensions per piece: 1670 x 609 x 38 mm
- Colour: Dark grey / Anthracite
Clearsonic ST2466 Sorber - twin pack Absorber Tiles Panels, Pack of 2
- Made of compressed fibreglass and encased in dark grey cloth
- This Sorber is mainly used as a side lid section for the ClearSonic lid system (LidPac)
- Panels are trapezium-shaped on one side
- Dimensions per piece: 1670 x 609 x 38 mm
- Colour: Dark grey / Anthracite
- Set of 2 pieces
Clearsonic S2466 Sorber Absorber Panel
- Made of compressed fibreglass and encased in dark grey cloth
- The Sorber is mainly used as a centre piece for the ClearSonic cover system (LidPac)
- But can also be used as a sound absorber on the walls of a studio, cellar, church, etc.
- Dimensions: 1670 x 609 x 38 mm
- Colour: Dark grey / Anthracite
6x Clearsonic S2224 Sorber 2-pack Absorber Panel
- Made of compressed fibreglass and encased in dark grey cloth
- The panel can also be mounted on the inside of the acrylic ClearSonic shields
- For reducing the amount of reflected sound, but can also be used as a sound absorber on the walls of a studio, cellar, church, etc.
- With the hook and loop fastener connectors (included), panels can easily be attached to almost any smooth surface
- Dimensions: 609 x 558 x 38 mm
- Colour: Dark grey / Anthracite
- 2 Pieces
Clearsonic Standard Support Bar Telescopic Rod
- Telescopic rod for supporting cover panels
- Variable length of 1530 mm to 2440 mm
Thomann Clip Ventilator Clip Fan
- 2-Speed air circulation fan for clipping on
- Suitable for Clearsonic ISO- and MEGA-Pacs
- Diameter: 18 cm
- Low-noise
Clearsonic A2466x6 Drum Shield 6-Segment panel
- For live and studio applications
- Noise and sound shielding of drum kits, amplifiers or instruments
- Easy handling by folding accordion-style hinge
- Made out of high quality laser-cut acrylic
- Consists of 6 panels with connectors (Hinges)
- Thickness: 6,35 mm
- Height: 1670 mm
- Width: 600 mm
- Indispensable for volume control on the stage and in the studio for a clean mix
- Weight: Approximately 46 kg
Clearsonic AX2412x6 Extender Panel Extension
- Panel to extend A2448 and A2466 panels
- Made of high-quality, laser-cut acrylic
- Consisting of 6 panels with hinge and 6 H-channels
- Dimensions per panel (H x W): 300 x 600 mm
- Thickness: 6.35 mm
- Illustrations show the panels partly with protective foil
2x Clearsonic S2466x2 Sorber Two-Section Absorber Panel
- Made of compressed fibreglass and encased in dark gray cloth
- Both panels are joined together with a fabric tape and can be used freestanding
- The panel can also be mounted on the inside of the acrylic ClearSonic shields to reduce the amount of reflected sound, or used as sound absorbers on the walls of a studio, basement, church etc.
- Dimensions per piece: 1670 x 609 x 38 mm
- Colour: Dark grey / Anthracite
Clearsonic ST2466 Sorber - twin pack Absorber Tiles Panels, Pack of 2
- Made of compressed fibreglass and encased in dark grey cloth
- This Sorber is mainly used as a side lid section for the ClearSonic lid system (LidPac)
- Panels are trapezium-shaped on one side
- Dimensions per piece: 1670 x 609 x 38 mm
- Colour: Dark grey / Anthracite
- Set of 2 pieces
Clearsonic S2466 Sorber Absorber Panel
- Made of compressed fibreglass and encased in dark grey cloth
- The Sorber is mainly used as a centre piece for the ClearSonic cover system (LidPac)
- But can also be used as a sound absorber on the walls of a studio, cellar, church, etc.
- Dimensions: 1670 x 609 x 38 mm
- Colour: Dark grey / Anthracite
6x Clearsonic S2224 Sorber 2-pack Absorber Panel
- Made of compressed fibreglass and encased in dark grey cloth
- The panel can also be mounted on the inside of the acrylic ClearSonic shields
- For reducing the amount of reflected sound, but can also be used as a sound absorber on the walls of a studio, cellar, church, etc.
- With the hook and loop fastener connectors (included), panels can easily be attached to almost any smooth surface
- Dimensions: 609 x 558 x 38 mm
- Colour: Dark grey / Anthracite
- 2 Pieces
Clearsonic Standard Support Bar Telescopic Rod
- Telescopic rod for supporting cover panels
- Variable length of 1530 mm to 2440 mm
Thomann Clip Ventilator Clip Fan
- 2-Speed air circulation fan for clipping on
- Suitable for Clearsonic ISO- and MEGA-Pacs
- Diameter: 18 cm
- Low-noise
SIMILAR ITEMS
