| Clearsonic : Gloves (9 comments)Fabric Gloves- For the gentle handling of Clearsonic panels |
|
| Clearsonic : H10.5 (HNG-AX12) Hinge Hinge Section- For connecting Clearsonic AX12 panels - Length: 266 mm |
|
| Clearsonic : H16.5 (HNG-AX18) Hinge Hinge section- For connecting A18 panels - Length: 419 mm |
|
| Clearsonic : Base Channel (1 comments)Floor-end profile- For Clearsonic acrylic panels - Length: 546 mm |
|
| Clearsonic : HCNL "H" Channel (3 comments)
Connection Profile; "H" Channel- Connection profile to extend a panel with an extension pa...(+) Connection Profile; "H" Channel- Connection profile to extend a panel with an extension panel - 600 mm Long |
|
| Clearsonic : H22.5 (HNG-A2 /A18) Hinge (3 comments)Joint profile- For connecting the A2 / A18 panels - 568 mm long |
|
| Clearsonic : H34 (HNG-A3) Hinge Hinge Section- For connecting Clearsonic A3 panels - 865 mm long |
|
| Clearsonic : T-Base22 (2 comments)
Stabilising Base Channel- The T-22 Base is used to secure ClearSonic Arcyl panels in place...(+) Stabilising Base Channel- The T-22 Base is used to secure ClearSonic Arcyl panels in place - Each acrylic panel is inserted into the T-base from above - The T-Base has a self-adhesive strip on the underside for fastening or can also be firmly fixed to the underside with screws - Length: 546 mm |
|
| Clearsonic : Flector 12 (7 comments)
Sound Reflector- Made of transparent modified acrylic - Material thickness: 2.5 mm - Size:...(+) Sound Reflector- Made of transparent modified acrylic - Material thickness: 2.5 mm - Size: 300 mm diameter - Reflects the sound back to the musicians, so they can hear themselves better - At the same time the sound energy is reduced to the front |
|
| Clearsonic : H46 (HNG-A4) Hinge (6 comments)Hinge Section- For connecting Clearsonic A4 panels - 1170 mm long |
|
| Clearsonic : H64 (HNG-A5) Hinge (16 comments)Hinge Section- For connecting Clearsonic A5 panels - 1623 mm long |
|
| Clearsonic : Short Support Bar (3 comments)
Telescopic Rod- Short telescopic bar for support of the lid panels - Length variable from ...(+) Telescopic Rod- Short telescopic bar for support of the lid panels - Length variable from 1140 mm to 1830 mm |
|
| Clearsonic : HF64 (HNG-OLD) (2 comments)
Joint profile- For connecting the old panels (built before March 2000), which have no groo...(+) Joint profile- For connecting the old panels (built before March 2000), which have no groove for the connector (also suitable for the Lite system) - Length: 1623 mm |
|
| Clearsonic : AX2412x1 (AX12-1) Extender (1 comments)
Panel For Extending A2448 and A2466 Panels- Made of very high quality - Laser cut acrylic ...(+) Panel For Extending A2448 and A2466 Panels- Made of very high quality - Laser cut acrylic - Consisting of a panel with a connector (Hinge) and an extension connector (H-channel) - Each panel is 6.35 mm thick - 300 mm high and each 600 mm wide |
|
| Clearsonic : Long Support Bar Telescopic Bar for Support of the Lid Panels- Length variable from 2200 to 3150 mm |
|
| Clearsonic : S2216 (S1D) Sorber twin-pack (3 comments)
Absorber Tiles- Absorber tiles made of compressed fiberglass and encased in light gray clo...(+) Absorber Tiles- Absorber tiles made of compressed fiberglass and encased in light gray cloth - The panel can also be mounted on the inside of the acrylic ClearSonic Shields to reduce the amount of reflected sound, or used as sound absorbers in studio, basement, churches etc. - With the enclosed Velcro connectors, panels can easily be attached to almost any smooth surface - Dimensions: 412 x 558 x 38 mm - Colour: Dark grey / Anthracite - Set of 2 pieces |
|
| Clearsonic : SX2412x2 Sorber Extender
Absorber Tile Set- Two-piece absorber panel made of compressed fiberglass and encased in d...(+) Absorber Tile Set- Two-piece absorber panel made of compressed fiberglass and encased in dark gray cloth - Both panels are joined together with a fabric tape and they are designed to extend the S5-2 baffles - Dimensions per piece: 305 mm x 609 mm x 38 mm - Colour: Dark grey / Anthracite |
|
| Clearsonic : S2224 (S2D) Sorber 2-pack (6 comments)
Absorber Panel- Made of compressed fibreglass and encased in dark grey cloth - The panel c...(+) Absorber Panel- Made of compressed fibreglass and encased in dark grey cloth - The panel can also be mounted on the inside of the acrylic ClearSonic shields - For reducing the amount of reflected sound, but can also be used as a sound absorber on the walls of a studio, cellar, church, etc. - With the hook and loop fastener connectors (included), panels can easily be attached to almost any smooth surface - Dimensions: 609 x 558 x 38 mm - Colour: Dark grey / Anthracite - 2 Pieces |
|
| Clearsonic : AX2418x2 (AX18-2) Extender
Panel for extending A2448 and A2466 panels- Made of high-quality, laser-cut acrylic - Cons...(+) Panel for extending A2448 and A2466 panels- Made of high-quality, laser-cut acrylic - Consists of 2 panels with hinges and 2 H-channels - Each panel is 6.35 mm thick, 450 mm high and 600 mm wide |
|
| Clearsonic : S1266 (STC512D) Sorber (8 comments)
Absorber Panel- Made of compressed fiberglass and encased in dark gray cloth - This absorb...(+) Absorber Panel- Made of compressed fiberglass and encased in dark gray cloth - This absorber is mainly used as a centerpiece for the ClearSonic cover system (LidPac) - Can also be used as a sound absorber in studio, basement, churches etc. - Dimensions: 1670 mm x 305 mm x 38 mm - Colour: Dark grey / Anthracite |
|