| Laney : IRT-SLS (7 comments)
- 3 Channels (Clean, Rhythm and Lead)- Power: 300W- 2 Power Modes: High Power - 300 W and ...(+) - 3 Channels (Clean, Rhythm and Lead)- Power: 300W- 2 Power Modes: High Power - 300 W and Standard Power - 1-60 W- Preamp tubes: 2 x ECC83- Controls: Pre-Boost, Clean Volume, Rhythm Gain, Lead Gain, Bass Pull Shift, Middle Pull Shift, Treble Pull Shift, Volume, Master Tone, Master Reverb and Variwatts- Switch: On / Off- Effects: Reverb- Serial FX loop- Connections: Input (6.3 mm jack), Speaker Output (Twist Lock and 6.3 mm jack combo), FX Loop Send and Return (2 x 6.3 mm jack), Footswitch Input (5 pin DIN)- Speaker outputs: 4 - 16 ohms (6.3 mm jack)- Dimensions (W x D x H): 320 x 235 x 70 mm- Weight: 3.5 kg- Includes FS4 footswitch |
|
| Laney : IRT60H Ironheart (103 comments)
- Power: 60 W- 4 ECC83 Preamp tubes- 2 6L6 Power amp tubes- Class AB amplifier- 3 Channels...(+) - Power: 60 W- 4 ECC83 Preamp tubes- 2 6L6 Power amp tubes- Class AB amplifier- 3 Channels: Clean, Rhythm & Lead- Controls for Bass, Middle, Treble with Pull-Push EQ Shift- Presence- Reverb- Pre Boost switchable by foot for each channel- FX Loop- Speaker output: 4, 8 and 16 ohm- Dimensions (W x H x D): 678 x 271 x 288 mm- Weight: 16.5 kg- 4-Way foot switch included- Corresponding THON case: Article Nr 317521 (not included, must be ordered separately) |
|
| Laney : Cub-Super12 (13 comments)- Channels: 1- Power: 15/ |
|
| Laney : Cub-112 Cabinet (1 comments)
- Laney Cub-112 Cabinet; speaker cabinet for electric guitar; Equipped With: 1 x 12" HH Cu...(+) - Laney Cub-112 Cabinet; speaker cabinet for electric guitar; Equipped With: 1 x 12" HH Custom speaker/s; Cabinet Construction: Open Back; Power Handling: 50 Watts; Impedance: 8 Ohms; Connectors: 2 x 1/4" Jack; Housing Material: MDF; Baffle Material: MDF; Front Grille: Silver/Black woven cloth ; Rearloaded; Dimensions (W x H x D): 520 x 430 x 230 mm; (20,5" x 16,9" x 9,1"); Weight: 10,4 kg (22,9 lbs) |
|
| Laney : IRT-Studio (133 comments)
- Power: 15 W- Complete Ironheart preamp: 3 channels, pre-boost, pull boost EQ controls, r...(+) - Power: 15 W- Complete Ironheart preamp: 3 channels, pre-boost, pull boost EQ controls, reverb- |
|
| Laney : GS212IE Cabinet (35 comments)
- Equipped with 2x 12" HH Custom speaker- Speaker construction: Closed- Power rating: 160 ...(+) - Equipped with 2x 12" HH Custom speaker- Speaker construction: Closed- Power rating: 160 W- Impedance: 8 Ohm- Input and link connections via 2x 6.3 mm jack- Housing material: Plywood- Ergonomic handles- Dimensions (W x H x D): 715 x 455 x 358 mm |
|
| Laney : FS2 Mini Footswitch (119 comments)
2-Way Footswitch- LED status lights- 2 Switches- Connectors: 6.3 mm stereo jack - Power su...(+) 2-Way Footswitch- LED status lights- 2 Switches- Connectors: 6.3 mm stereo jack - Power supply connector (hollow plug socket 5.5 x 2.1 mm - negative pole inside) is only required for LEDs- Power consumption: 40 mA- Power supply via 9 V DC power adapter (not included - suitable power adapter: Article no. 409939)- 3 m stereo jack cable included |
|
| Laney : LA30BL (5 comments)
- 1 channel- Power: 30 watts- Preamp tubes: 2 x 12AX7- Power tubes: 2 x EL34- Controls: Ga...(+) - 1 channel- Power: 30 watts- Preamp tubes: 2 x 12AX7- Power tubes: 2 x EL34- Controls: Gain - Treble - Middle - Bass - Presence- Switch: Power On / Off - Standby- Speaker Outputs: 16 ohms, 8 & 4 ohms (6.3 mm jack)- Connections: 2 x Treble Input (6.3 mm jack) - 2 x Bass Input (6.3 mm jack)- Custom Made Vintage Design Output Transformer- Dimensions (W x D x H): 620 x 220 x 220 mm- Weight: 12 kg- Colour: Black- Made in the UK |
|
| Laney : FS-1 Mini Footswitch (44 comments)
- Redesigned Laney FS1 footswitch with the same functionality as the original model, diffe...(+) - Redesigned Laney FS1 footswitch with the same functionality as the original model, differing in that it takes up much less space- LED status light- Connections: switch output (6.3 mm jack plug), 9V DC power supply connection (coaxial plug, 5.5 x 2.1 mm, negative polarity inside)- Powered via a 9V DC power supply unit (only for the LED - power supply is not included, suitable unit available under Article Nr 409939)- Incl. removable angled to straight jack cable |
|
| Laney : A-Fresco 2 (12 comments)
- Battery powered- 2 Channels- Power: 60W- Equipped with 8" custom designed dual cone spea...(+) - Battery powered- 2 Channels- Power: 60W- Equipped with 8" custom designed dual cone speakers- Controls: Master Volume per channel, Level, Bass, Middle, Treble and Reverb- Switches: Bass Shape, Chorus, Anti-Feedback and Phase- Effects: Digital Reverb and Chorus- Connections: 2 inputs XLR / jack combo, headphone, aux input, FX send / return, XLR line output, footswitch- Phantom power- Closed housing construction- 35 mm Stand flange mount- Dimensions: (W x D x H): 265 x 242 x 347 mm- Weight: 7.2 kg- Includes new Li-ion battery pack with up to 24h operation |
|
| Laney : GS112IE Cabinet
- Equipped with: 1x 12" HH custom speaker- Load capacity: 80 W- Impedance: 8 Ohm- Connecto...(+) - Equipped with: 1x 12" HH custom speaker- Load capacity: 80 W- Impedance: 8 Ohm- Connectors: Input & Link (2x 6.3 mm jack)- Closed construction- Housing material: Plywood- Ergonomic handles- Dimensions (W x H x D): 578 x 430 x 358 mm |
|
| Laney : Cub-212 Cabinet
- Lightweight and easy to transport- Can be used horizontally or vertically- Equipped with...(+) - Lightweight and easy to transport- Can be used horizontally or vertically- Equipped with 2 x 12" HH Custom speaker- Speaker construction: Open- Power rating: 100 W- Impedance: 8 Ohm- Connectors: Input & Link (2 x 6.3 mm jack)- Housing material: MDF- Baffle material: MDF- Front grille: Silver/Black woven cloth- Rear-loaded- Dimensions (W x H x D): 700 x 430 x 230 mm- Weight: 10.4 kg |
|
| Laney : LFR-212 Active Cab (4 comments)
- Active full-range flat response (FRFR) speaker- Equipped with 2 x 12" Custom-voiced FRFR...(+) - Active full-range flat response (FRFR) speaker- Equipped with 2 x 12" Custom-voiced FRFR drivers & 1" LaVoce compression driver speaker- Speaker construction: Closed- Power: 800 W- Controls: Level, HF Trim- Switches: Cabinet emulation FRFR, 1 x 12 & 4 x 12, Light On/Off, Ground Lift & Voltage Selection Switch- Connections: Combi XLR/jack input- Link Out (6.3 mm jack)- AUX In: 3.5 mm Stereo jack- XLR DI Out- Dimensions (W x H x D): 555 x 360 x 770 mm- Weight: 30 kg |
|
| Laney : LA212 (3 comments)
- Specially designed for the Laney/Black Country Customs LA30BL head- Bevelled design with...(+) - Specially designed for the Laney/Black Country Customs LA30BL head- Bevelled design with diagonally offset speakers to give the speakers room to breathe- With a powerful bass reproduction and excellent volume without unwanted distortion- Equipped with: 2 x Celestion G12M Greenback loudspeakers- Cabinet construction: Closed- Rated power: 60 Watts- Impedance: 8 Ohms- Connections: 6.3 mm jack- Rear loaded- Dimensions (W x H x D): 670 x 670 x 330 mm- Weight: 26 kg- Colour: Black- Made in the UK |
|
| Laney : LFR-112 FRFR Active Cab (38 comments)
- Acrtive full range - flat response (FRFR) speaker box- For guitarists who use digital mo...(+) - Acrtive full range - flat response (FRFR) speaker box- For guitarists who use digital modellers but prefer the traditional look of a guitar box- Crystal clear audio playback- Kick-Back stand for direct radiation- DI output with 1x 12"and 4x 12" speaker simulation- Switchable front lighting- Power: 200 W- Equipped with: 12" FRFR speaker & 1" La Voce compression driver tweeter (adjustable)- Cabinet construction: bass reflex- Controls: Level - HF-TRIM- Switches: cabinet emulation - FRFR - 1x 12 - 4x 12 - front baffle illumination on / off - Ground Lift - Power- Effects: speaker simulation- Connections: input (XLR / jack combo plug) - link out (6.3 mm jack) - AUX input (3.5 mm stereo mini jack) - DI output (XLR)- Dimensions (W x D x H): 575 x 355 x 420 mm- Weight: 19.5 kg |
|
| Laney : FS4 (13 comments)- For use with Ironheart and Nexus Amps- Plus cable and sticker set |
|
| Laney : Mini-St-Lion Battery Combo (12 comments)
- Super compact as a desktop, backstage or practice amp- Featuring a unique Laney LSI (Lan...(+) - Super compact as a desktop, backstage or practice amp- Featuring a unique Laney LSI (Laney Smartphone Insert) - connect your amp to your favorite guitar app to access all your favorite sounds- LSI connection cable included and compatible with iOS and Android devices- Channels: 2- Power: 2 x 3 Watt- Equipment: 2x 3" speaker- Controls: Gain - Level - Tone - Delay - Volume- Switches: Drive - Power- Powered via 6x AA batteries or optional Mini-Laney power adapter (article no. 432731 - both not included)- Dimensions (W x D x H): 205 x 100 x 142 mm- Weight: 1.8 kg- Input: 6.3 mm jack- AUX input: 3.5 mm stereo jack- Headphone jack: 3.5 mm stereo jack- LSI (Laney Smartphone Insert) |
|
| Laney : Cub-Supertop (9 comments)
- 1 Channel- Power: 15 / < 1 Watt- Preamp tubes: 3x 12AX7- Power amp tubes: 2x EL84- Contr...(+) - 1 Channel- Power: 15 / < 1 Watt- Preamp tubes: 3x 12AX7- Power amp tubes: 2x EL84- Controls: Boost, Gain, Bass, Middle, Treble, Reverb, Volume- Switch: Boost- Effects: Reverb- Speaker output: External speaker 8 - 16 Ohm (6.3 mm jack)- Input 15 W: 6.3 mm jack- Input < 1 W: 6.3 mm jack- Effects loop send & return: 2 x 6.3 mm jack- Footswitch Boost connector: 6.3 mm jack- Dimensions (W x D x H): 430 x 176 x 210 mm- Weight: 7.5 kg- Suitable footswitch: Article no. 260691 (not included) |
|
| Laney : A-Duo (10 comments)
- 2 Independent channels- Both with XLR or jack inputs, 3-band EQ and a "shape" control- C...(+) - 2 Independent channels- Both with XLR or jack inputs, 3-band EQ and a "shape" control- Can be adapted to different playing situations- Upright on the floor it takes up minimal space and can even be used as a seat- Alternatively, it can be mounted on the side feet or a speaker stand for maximum projection- Permanent phantom power on both XLR channel inputs- 4 Digital Global EQ presets- Power: 2 x 60 Watts- Equipped with: 2 x 8" Custom Designed Dual Cone Speaker Speakers- Housing construction: Closed- Controls: Level, Bass, Mid, Treb, Shape, Chorus, Reverb, Anti-Feedback, Phase- Switch: DI Pre / Post, Ground Lift- Effects: Reverb, Chorus- Dimensions (W x D x H): 265 x 242 x 530 mm- Weight: 10.5 kg- Suitable footswitch: Art.121728 (not included)- 2 Inputs: XLR / 6.3 mm jack combo- DI Out: XLR- FX Send & Return: 2x 6.3 mm jack- Headphones: 3.5 mm stereo jack- Aux In: 3.5 mm stereo jack- Footswitch connection: 6.3 mm stereo jack |
|