| Dynacord : MB 40 B - Suitable for FE 40B- Colour: Black |
|
| Dynacord : SH-A118 (11 comments)- For Dynacord A 118 and A 118 A |
|
| Dynacord : TS 200 (3 comments)
- Vertical array- Equipped with: 2x 6.5"DND 6130-16 Neodymium woofer, 1x 1" DHT3 driver- C...(+) - Vertical array- Equipped with: 2x 6.5"DND 6130-16 Neodymium woofer, 1x 1" DHT3 driver- Coverage pattern: 90° x 40°- Impedance: 8 - Rated power: 300 Watt RMS- Maximum level: 128 dB- Frequency range: 90 - 20000 Hz- 2x Speaker twist connection- Overload Protection for tweeter- Dimensions: 199 x 514 x 240 mm- Weight: 10 kg- Colour: Black |
|
| Dynacord : Powermate 502 (10 comments)
- 5 Mic/Line mono-channels- 3 Stereo channels- Compressor for microphone channels- 2 x 450...(+) - 5 Mic/Line mono-channels- 3 Stereo channels- Compressor for microphone channels- 2 x 450 W (RMS/4 Ohm)- Power amplifier switchable to 100 V- Amp limiter- Talk-over function- Internal DSP effects with 32 editable stereo presets- 7-Band equalizer |
|
| Dynacord : CB-TS200 (4 comments)- Suitable for Dynacord TS 200 |
|
| Dynacord : L2800FD DSP (11 comments)
- 2-Ohm stability- Intuitive system control software for easy setup and control- Balanced ...(+) - 2-Ohm stability- Intuitive system control software for easy setup and control- Balanced XLR in / out- Speaker Twist connectors- Dimensions (W x H x D): 483 x 88 x 462.4 mm- Weight: 16.2 kg- 2 Ohm: 2300 W- 2.7 Ohm: 2000 W- 4 Ohm: 1400 W- 8 Ohm: 700 W- 2 Ohm: 2200 W- 2.7 Ohm: 1800 W- 4 Ohm: 1300 W- 8 Ohm: 650 W- Bridged: 4 Ohm: 4400 W- Bridged 8 Ohm: 2600 W |
|
| Dynacord : CMS 600 Bag (17 comments)- Suitable for CMS 600 |
|
| Dynacord : CMS1600-3 (22 comments)
- 12x Mic/Line inputs + 4x Mic/Stereo inputs- 3-band EQ with para. Mids and Voicing Filter...(+) - 12x Mic/Line inputs + 4x Mic/Stereo inputs- 3-band EQ with para. Mids and Voicing Filter- 6 AUX- Mute and PFL- 11-Band EQ- XLR output- Lamp connector: 4-pol. XLR- USB interface for direct playback or recording- Mixer is well arranged and easy to use- Effects and sounds of the highest quality! |
|
| Dynacord : RKM-CMS -3 (21 comments)19" Rack Mounting Kit- For the mixer CMS 1000- Includes mounting material- Colour: Black |
|
| Dynacord : CMS600-3 (32 comments)
- Can be mounted into a 19" rack (rackmount not included)- 6 Mic-line channels- 2 Stereo l...(+) - Can be mounted into a 19" rack (rackmount not included)- 6 Mic-line channels- 2 Stereo line inputs- 3 AUX sends- 200 editable stereo effects- 4x I/O USB interface- 9-Band stereo master EQ- XLR output- USB interface for direct playback or recording- Dimensions (H x W x D): 110 x 417 x 348 mm- Weight: 6 kg- Optional rackmount available under Article Nr 303604 (not included, must be ordered separately)- Suitable bag available under Article Nr 300887 (not included, must be ordered separately)- Suitable dust cover available under Article Nr 498246 (not included, must be ordered separately) |
|
| Dynacord : Powermate Fader Knob
- Suitable for Powermate 600, 1000-2 and 1600-2- Fader slot: 4 mm- Measurements: 25 x 13 m...(+) - Suitable for Powermate 600, 1000-2 and 1600-2- Fader slot: 4 mm- Measurements: 25 x 13 mm |
|
| Dynacord : CMS1000-3 (74 comments)
- With built-in dual effects section- Connections: 6x Mic/Line inputs + 4x Mic/Stereo inpu...(+) - With built-in dual effects section- Connections: 6x Mic/Line inputs + 4x Mic/Stereo inputs- 3-Band EQ with parametric mid-band and voicing filter- 6 AUX paths, mute and PFL- 11-Band EQ in total- XLR output- Lamp connector: 4-Pin XLR- USB interface for direct playback or recording- Dimensions (W x H x D): 510 x 155 x 499 mm- Suitable rack mounts: Article no. 177268 (not included)- Dimensions of rack mounts: 483 x 135 x 444 mm |
|
| Dynacord : Powermate Channel Fader (11 comments)- Stereo (354263)- 10kA x2 Alps- Suitable for PM600, 1000 and 1600 |
|
| Dynacord : SL1800 (24 comments)
- 2x 900 W/ 4 Ohm- 2x 550 W/ 8 Ohm- 2x 1250 W/ 2 Ohm- 1x 1800 W/ 8 Ohm (bridge mode)- 2 Oh...(+) - 2x 900 W/ 4 Ohm- 2x 550 W/ 8 Ohm- 2x 1250 W/ 2 Ohm- 1x 1800 W/ 8 Ohm (bridge mode)- 2 Ohm compatible- Symmetrical XLR in/ out- Speaker twist out- Ground lift- Limiter- LPN Filter (low pass notch) protection- Temperature switch-off- DC protection- Fan- Weight: 16.3 kg- Dimensions: 483 x 88.1 x 421.5 mm- Format: 19", 2 RU |
|
| Dynacord : CMS2200-3 (2 comments)
- Dynacord CMS2200-3 - mixer with internal FX, 18x mic/line inputs, 4x mic/stereo inputs, ...(+) - Dynacord CMS2200-3 - mixer with internal FX, 18x mic/line inputs, 4x mic/stereo inputs, 3-band EQ with parametric mids and voicing filter, 6x auxes, USB Port for Recording and Playback, mute and PFL, 11-band stereo Graphic EQ, XLR output, 3-pin XLR Littlite connector. |
|
| Dynacord : Handle Powermate 600-2 Left - To the left side part- For series/generation 2- Colour: Grey |
|
| Dynacord : RKM 502 (4 comments)- Model: Dynacord RMK 502-19"- Colour: Black |
|
| Dynacord : Powermate 600-3 (59 comments)
- Power: 2x 1000 W / 4 Ohm- 6 Mic line channels- 2 Stereo line inputs- 3 AUX busses- 200 E...(+) - Power: 2x 1000 W / 4 Ohm- 6 Mic line channels- 2 Stereo line inputs- 3 AUX busses- 200 Editable stereo effects- 4 x I/O USB Interface- Speaker Twist output- 9-Band stereo master EQ- Weight: 9 kg- Incl. Plastic transport lid with magnet holder- Suitable 19" rack mount kit: RMK 600-3 - Article Nr. 285443 (not included)- Suitable dust cover: Article Nr. 498246 (not included) |
|