| Erica Synths : Plasma Drive (9 comments)
Distortion Module with Plasma Technology by Gamechanger Audio- Input Level, Wet / Dry Mix,...(+) Distortion Module with Plasma Technology by Gamechanger Audio- Input Level, Wet / Dry Mix, Voltage and Voltage CV controls- Treble / bass equalizer- EQ bypass switch- Additional overtones via octave up / down switch- CV Inputs for Voltage and Wet / Dry Mix (3.5 mm)- Octave and sub-trigger inputs (3.5mm)- Current consumption: 135 mA (+12 V) / 87 mA (-12 V)- Width: 16 HP |
|
| Erica Synths : Zen Delay (40 comments)
Delay time adjustable from 1 - 5000 ms- Up to 50 s delay time via tap tempo or MIDI clock ...(+) Delay time adjustable from 1 - 5000 ms- Up to 50 s delay time via tap tempo or MIDI clock mode- 5 Delay modes (tape, tape ping pong, digital ping pong, digital, crossover)- Analogue multimode filter with resonance (low pass, band pass, high pass)- Adjustable tube overdrive- Stereo input: 6.3 mm jack- Stereo output: 6.3 mm jack- Control input (6.3 mm TRS jack) for optional bypass / TAP foot switch (not included)- MIDI-in- Dimensions (W x D x H): 21 x 15 x 5 cm- Weight: 870 g- Power supply unit included (12 V DC) |
|
| Erica Synths : Fusion System II (with Lid) (4 comments)
Pre-configured modular system consisting of Erica Synths tube modules- Contains: 2x Fusion...(+) Pre-configured modular system consisting of Erica Synths tube modules- Contains: 2x Fusion VCO2, Fusion VCF3, Fusion Modulator, Fusion VCA/Waveshaper/Ringmodulator, Fusion Delay/Flanger/Vintage Ensemble- 104 HP One Row Skiff Case with lid- Dimensions: approx. 52 x 15 x 11 cm- Includes external power supply and 20 patch cables |
|
| Erica Synths : Megarack
8x 126HP all-aluminium housing with side panels, rails and threaded inserts- 8 Rows / 24U-...(+) 8x 126HP all-aluminium housing with side panels, rails and threaded inserts- 8 Rows / 24U- Width: 126 HP- Installation depth for modules: 6 - 12 cm- 2x lamp connector (4-pin XLR)- Built-in power supply- Maximum power output: +12 V / 12 A, -12 V / 6 A- Dimensions (W x H x D): 670 x 1000 x 360 mm- Weight: 14.75 kg |
|
| Erica Synths : Dual Drive
2 Identical overdrive circuits in one module- Gain and Drive controls- Gain and Drive are ...(+) 2 Identical overdrive circuits in one module- Gain and Drive controls- Gain and Drive are CV controllable- Three different overdrive tones selectable- Power requirement: 58 mA (+12 V) / 58 mA (-12 V)- Width: 10 TE- Depth: 50 mm |
|
| Erica Synths : Bassline (8 comments)
Analog synthesizer voice for bass and lead sounds- VCO with three waveforms (sawtooth, rec...(+) Analog synthesizer voice for bass and lead sounds- VCO with three waveforms (sawtooth, rectangle, triangle)- Suboscillator- Erica Synths Acidbox Filter (Lowpass / Bandpass)- VCO beats simulated via BBD circuit- VCA with decay envelope and accent input- CV input for FM and VCF- Power requirement: 110 mA (+12 V) / 70 mA (-12 V)- Width: 14 TE- Width: 35 mm |
|
| Erica Synths : Black K-Phaser (2 comments)
8 All-pass filters with photo resistors for control- Phase shift and resonance controls- P...(+) 8 All-pass filters with photo resistors for control- Phase shift and resonance controls- Phase CV input with bipolar attenuator- Mode switch (Classic/Spread)- Built-in LFO with rate control- Rate CV input and two selectable waveforms- LFO signal output- Audio input- 2 Audio outputs (Main/Wet)- Number of filters in resonance path configurable via rear DIP switch- Power consumption: 88 mA (+12 V) / 78 mA (-12 V)- Width: 10 U- Depth: 35 mm |
|
| Erica Synths : Black Sequencer (19 comments)
Step sequencer with a maximum of 64 steps- 4 Tracks, each with outputs for pitch CV, mod C...(+) Step sequencer with a maximum of 64 steps- 4 Tracks, each with outputs for pitch CV, mod CV and gate- 16 Banks with 16 patterns and 16 songs each- 16 Encoders for value input- Note value, glide, gate time and modulation value programmable per step- Probability, repetitions and ratcheting programmable per step- Quantizer with preset and user scales- Microtuning- Shuffle and clock divider programmable per track- Random function for all parameters- Fixed voltages, envelopes, LFOs or triggers programmable via modulation CV out- Copy/Paste for all parameters- Tap tempo- SD card slot- Current consumption: 145 mA (+12 V) / 25 mA (-12 V)- Width: 42 HP- Depth: 25 mm |
|
| Erica Synths : Link
Contains 5 independent adapters from 3.5 mm mono jack to 6.3 mm mono jack- Passive constru...(+) Contains 5 independent adapters from 3.5 mm mono jack to 6.3 mm mono jack- Passive construction - no power supply required- Width: 8 TE |
|
| Erica Synths : Black Joystick 2 (10 comments)
Joystick with 8 CV outputs - 4 channels, each with output for X and Y axis- 2 Gate outputs...(+) Joystick with 8 CV outputs - 4 channels, each with output for X and Y axis- 2 Gate outputs- Per channel joystick recorder with up to 8 sec. recording time- LFO and drone oscillator modes- Voltage range of CV outputs: -5V to +5V- LFO frequency range: 0.1 - 10Hz- Drone oscillator frequency range: 50 - 1000 Hz- Current consumption: 71mA (+12V) / 20mA (-12V)- Width: 12 HP- Depth: 30 mm |
|
| Erica Synths : Sample Drum (17 comments)
Sampler / Sample Player for live performances- Two identical channels (A / B) allow record...(+) Sampler / Sample Player for live performances- Two identical channels (A / B) allow recording, playback and editing of samples- 6 Encoder knobs for real-time editing- Various playback modes, tuning, VCA, AD envelope and effects per channel adjustable- Per channel: Trigger input, 3x CV input, audio output- Stores on micro SD card- Width: 14 TE- Includes 16 GB Micro SD card with samples |
|
| Erica Synths : Techno System (5 comments)
Full-featured modular drum machine- Consists of the following modules: Sample Drum, Bassli...(+) Full-featured modular drum machine- Consists of the following modules: Sample Drum, Bassline, Bass Drum, Snare, Toms, Clap, Hi-Hats D, Cymbals, Modulator, Link, Stereo Mixer, Mixer, Dual FX, Mixer Lite- Dual Drive and Drum Sequencer- Drum modules are internally patched to the sequencer for trigger- and accent-signals- System comes assembled in an Erica Synths Travel Case- Dimensions: 550 x 280 x 140 mm- Weight: 7.55 kg- External power supply included |
|
| Erica Synths : Pico Drum 2 (16 comments)
Digital drum module with 8 algorithms- Algorithms: Pulse Drum, Fold Drum 1, Complex Pulse ...(+) Digital drum module with 8 algorithms- Algorithms: Pulse Drum, Fold Drum 1, Complex Pulse Drum, Complex Sine Drum, Space Snare, Noise Crush, Fold Drum 2, Slap- 3 Parameters per algorithm, directly accessible via knobs- 2 Assignable CV inputs- CV switching of algorithms possible- 1V/oct. tuning- Trigger input- Audio output- Current consumption: 28mA (+12V) / 5mA (-12V)- Width: 3 HP- Depth: 35 mm |
|
| Erica Synths : Eurorack Cable Holder 300mm (52 comments)
For 3.5 mm patch cable- Material: 2 mm Aluminium- Powder-coated- Width: 305 mm- Colour: Bl...(+) For 3.5 mm patch cable- Material: 2 mm Aluminium- Powder-coated- Width: 305 mm- Colour: Black |
|
| Erica Synths : Pico Drums
With 64 samples in 12 bit quality- Two independent drum voices per module- USB interface f...(+) With 64 samples in 12 bit quality- Two independent drum voices per module- USB interface for loading your own samples- Pitch, decay, volume and a separate trigger input are available for each drum part- Width: 3 TE / HP- Depth: 35 mm- Electricity requirement: + 35mA (+ 12V) / -15mA (-12V) |
|
| Erica Synths : Pico DSP (55 comments)
8 Algorithms: Mono Delay, Pitch Shift Delay, Stereo Delay, Granular Delay, Reverb, Saturat...(+) 8 Algorithms: Mono Delay, Pitch Shift Delay, Stereo Delay, Granular Delay, Reverb, Saturated Reverb, Leslie Speaker, Overdrive / Bitcrusher- 2 Parameters per effect can be edited- CV input for modulations- Stereo output- Width: 3 TE / HP- Depth: 35 mm- Power requirement: +30 mA (+12 V) / -20 mA (-12 V) |
|
| Erica Synths : Hi-Hats D (5 comments)
Drum module with classic digital hi-hat sound- Signal path from discrete 6-bit DAC and ana...(+) Drum module with classic digital hi-hat sound- Signal path from discrete 6-bit DAC and analogue AS3330 VCA- Adjustable decay for closed and open hi-hat- Adjustable tuning- Loop-mode for open hi-hat- Tune and decay controllable via CV- Adjustable VCA characteristic- Trigger button for closed and open hi-hat- Trigger and accent inputs- Power consumption: 56 mA (+12 V) / 35 mA (-12 V)- Width: 10 TE- Depth: 45 mm |
|
| Erica Synths : Perkons HD-01 (18 comments)
Per voice: digital sound engine with 3 selectable algorithms and two adjustable parameters...(+) Per voice: digital sound engine with 3 selectable algorithms and two adjustable parameters- Analogue multimode filter (low-pass, band-pass, high-pass), controls for tune, decay, cutoff, drive, FX send and level- BBD delay with modulation LFO- Master effects: Opto-copressor and overdrive- Freely assignable modulation LFO with continuously mixable waveforms- 4-Track step sequencer with 16 steps- 4 Selectable clock dividers/multipliers per track- Programmable ratchets and probabilities per step- 4 Selectable shuffle algorithms- Memory for 64 patterns and 64 kits- Touch-sensitive trigger input (compatible with e-drum pads)- Audio output and send/return jacks per voice: 6.3 mm jack- Clock input and output: 6.3 mm jack- Headphone output- Master output and master send/return jacks: 6.3 mm jack- MIDI in/out- SD card slot- Dimensions (W x D x H): 455 x 315 x 90 mm- Weight: 4.5 kg- Incl. external power supply (12V DC) |
|
| Erica Synths : Pico System III Desktop (12 comments)
Fully analogue construction- Plug-in connections can be stored via plug-in voice cards (5 ...(+) Fully analogue construction- Plug-in connections can be stored via plug-in voice cards (5 x preset cards and 5 x DIY cards included)- Dimensions (W x D x H): 240 x 140 x 80 mm- Weight: 950 g- Includes: 20 patch cables, 1 stackable patch cable, external power supply (12 V DC) and manual- Step sequencer- 2 x VCO- 2 x Mixer- LFO- Sample & Hold- Noise & Random generator- 2 x Function generator- 2 x Lowpass Gate- BBD delay & output section |
|
| Erica Synths : Midi to Trigger Module (6 comments)
Converts MIDI notes into trigger signals- 8 Trigger outputs- LED display of the active tri...(+) Converts MIDI notes into trigger signals- 8 Trigger outputs- LED display of the active triggers- Easy assignment of MIDI notes to triggers- Configurable MIDI channel- Switchable MIDI clock output- Power consumption: 15mA @ + 12V, 0mA @ -12V- Dimensions (W x D): 6 HP x 25 mm |
|