| Rode : NT5 S Bundle (24 comments)
Rode NT5 S True Condenser Microphone-
With gold sputtered 1/2" diaphragm-
Cardioid-
Sat...(+) Rode NT5 S True Condenser Microphone-
With gold sputtered 1/2" diaphragm-
Cardioid-
Satin nickel finish-
Very low noise-
Full frequency response-
Active electronics: JFET impedance converter-
Frequency range: 20 Hz to 20 kHz-
Sensitivity: -38 db at 1v / Pa + -2 dB-
Maximum output: +13.9 dBu-
Dynamic range: >128 dB-
Signal to noise ratio: 78 dB-
Weight: Microphone 100g-
Phantom power required (18V - 48V)-
Including windshield, tripod adapter and case-
Including 10 years manufacturer warranty K&M 27105 Microphone stand Thomann Type I-
Plastic base-
Height is adjustable from 900 to 1600 mm-
Boom arm: 810 mm-
Weight: 2.3 kg-
Colour: Black Cordial CAM 9 BK Professional Microphone Cable-
Length: 9 m-
Original Neutrik NC 3 FXX-BAG + NC 3 MXX-BAG XLR plugs-
Cable type: CME 220 Black-
Thomann hook & loop cable tie included-
Colour: Black |
|
| Rode : Rodecaster Pro Bundle 1 - Rode PodMic- Rode Rodecaster Pro- KRK KNS 6400- Cordial CFM 2.5 FM- Rode PSA-1 |
|
| Rode : M3 Bundle (96 comments)- pro snake TPM 10- Rode M3 |
|
| Rode : Stereo Bar SB20 (314 comments)
- For tripod mounting of two microphones- Material: Robust ABS- Precise angle and distance...(+) - For tripod mounting of two microphones- Material: Robust ABS- Precise angle and distance markers for positioning the microphones according to ORTF, XY or small AB- Two slidable 3/8" threads- Spacer can be used above or below- Dimensions (H x W x D): 170 x 240 x 70 mm- Weight: 45 g- Colour: Black |
|
| Rode : NTK (41 comments)
Valve Condenser Studio Microphone- Gold plated large diaphragm- Very low noise level- Wide...(+) Valve Condenser Studio Microphone- Gold plated large diaphragm- Very low noise level- Wide frequency range- Hand-selected twin-triode valve- Incl. power supply and RM2 microphone flange with ring holder |
|
| Rode : WS11 (13 comments)
- Foam mesh on the inside and synthetic fur on the outside- Acoustically transparent- Prot...(+) - Foam mesh on the inside and synthetic fur on the outside- Acoustically transparent- Protects against noise up to approx. wind force 5 during outdoor recordings- Dimensions (L x D): 125 x 85 mm- Weight: 21 g |
|
| Rode : PG1 (9 comments)- For Rode VideoMic or stereo VideoMic- 3/8" thread |
|
| Rode : NT55 (16 comments)
- With 1/2" cardioid capsule and changeable capsule with omnidirectional polar pattern- Hi...(+) - With 1/2" cardioid capsule and changeable capsule with omnidirectional polar pattern- High-pass filter and pre-attenuation can be switched in three steps- Satin nickel-plated metal housing- Includes omnidirectional capsule NT45-O, stand clamp and metal box- Includes 10 years manufacturer's warranty |
|
| Rode : MicDrop
- Rode MicDrop; cable weight for lavalier microphones; suitable for Lavalier, Lavalier GO,...(+) - Rode MicDrop; cable weight for lavalier microphones; suitable for Lavalier, Lavalier GO, SmartLav+ and RODELink LAV; to weigh down the microphone cable; enables sorted laying e.g. under clothing; material: brass, satin nickel-plated; dimensions: 35 x 14.8 x 15mm; weight: 32g |
|
| Rode : K2 Bundle (10 comments)
Rode K2 Tube Microphone-
With infinitely variable pattern-
Frequency range 20 Hz to 20 k...(+) Rode K2 Tube Microphone-
With infinitely variable pattern-
Frequency range 20 Hz to 20 kHz-
Impedance 200 Ohm-
Sensitivity: -36 dB re 1 V / Pa (16mV @ 94 dB SPL) +/- 2 dB-
Incl. elastic mount SM2 in a case-
Including 10 years manufacturer warranty pro snake TPM 10 Professional microphone cable-
Length: 10 m-
Black Yongsheng XLR plug (made by Neutrik)-
XLR male --> XLR female-
Incl. hook and loop fastener |
|
| Rode : RODELink LAV (5 comments)
- Miniature condenser capsule with omnidirectional directional characteristic- Kevlar-rein...(+) - Miniature condenser capsule with omnidirectional directional characteristic- Kevlar-reinforced connecting cable (1.2 m)- 3.5 mm locking TRS connector- Broadcast quality sound- Frequency response: 20 - 20,000 Hz- Sensitivity: 21 mV/Pa- SPL (sound pressure level): 110 dB- Power supply: Plug-in power (2 to 5 V)- Dimensions: 12 x 4.5 x 4.5 mm- Includes a foam pop shield, mounting clip and a storage bag |
|
| Rode : NTH-CABLE12P
- Rode NTH-CABLE12P; accessory cable for Rode NTH-100 headphones; solid TRS cable (3.5mm j...(+) - Rode NTH-CABLE12P; accessory cable for Rode NTH-100 headphones; solid TRS cable (3.5mm jack); locking earcup connector; included in delivery: 1x screw adapter (3.5mm to 6.3mm jack) as well as set of colored identification rings; length: 120cm; weight: 26g; color: pink |
|
| Rode : DeadWombat (8 comments)- For Rode Blimp- Spare part |
|
| Rode : NT3 (80 comments)
Condenser Microphone- For stage and studio operation- Elastically mounted 3/4" true conden...(+) Condenser Microphone- For stage and studio operation- Elastically mounted 3/4" true condenser capsule - externally polarized- Cardioid- Frequency range: 20 - 20,000 Hz- Peak SPL: 140 dB- Sensitivity: 12 mV- Inherent noise: 16 dBA- Operated with 48 V phantom power or 9V battery (not included)- On/ off switch with battery status LED- Address type: front- Satined nickel-plated metal cast housing- Robust windscreen- Effective shielding RF interference- For outdoor recording and stage use- Ideal for recording choir, brass orchestra and other acoustic instruments- Thanks to good structure-borne noise suppression it can also be used as moderation microphone- Length: 20.6 cm- Diameter: 3.2 cm- Weight (without battery): 371 g- Incl. foam windscreen WS 3, RM3 stand clamp and ZP1 transport case |
|
| Rode : NT5 MPB (27 comments)
- With gold-coated 1/2" diaphragm- Characteristic: Cardioid- Frequency range: 20 - 20,000 ...(+) - With gold-coated 1/2" diaphragm- Characteristic: Cardioid- Frequency range: 20 - 20,000 Hz- Output impedance: 100 ohms- Max. Sound pressure level: 143dB SPL- Max. Output level: + 13.9dBu- Very low noise- Requires 48V phantom power- Scratch-resistant, matt black enamelled metal housing- Dimensions (H x W x D): 118 x 20 x 20 mm- Weight per microphone: 101 g- Includes windshield, tripod adapter and plastic case |
|
| Prodector : RMX 500 (13 comments)- Suitable for Pioneer RMX 500 |
|
| Rode : Cable f. NTK und K2
- For NTK and K2 Tube Mic- 7-Pin XLR connector- For connection between power supply and mi...(+) - For NTK and K2 Tube Mic- 7-Pin XLR connector- For connection between power supply and mic- Length approx. 10 m |
|