| Rupert Neve Designs : 5057 Orbit
(2 comments)
- Rupert Neve Designs 5057 Orbit; 16x2 summing mixer; 16 channel Class-A mix bus; Silk Red...(+) - Rupert Neve Designs 5057 Orbit; 16x2 summing mixer; 16 channel Class-A mix bus; Silk Red & Blue modes with texture controls for precise control of sound; very low crosstalk for wide stereo image and sonic depth; cascadable via bus link with multiple 5057 units; input impedance: 16K ohms; Frequency response: 10 Hz to 50 kHz: +/- 0.1 dB; Max input level at 1 kHz: +26 dBu; Max output level at 1 kHz: +26 dBu; THD+N (from 22 Hz - 22 kHz): 0 dBu at 1 kHz: 0. 003%, +20 dBu at 1 kHz: 0.0006%; 2x DB25 inputs (TASCAM-standard) and XLR outputs; combinable via Buss-Link with other Rupert Neve Designs summing units; Dimensions (WDH); 483 x 229 x 44 mm; Weight: approx. 4kg |
|
| Rupert Neve Designs : Portico 542
(18 comments)
- API 500 Format- Tape saturation emulator- Trim control (+/-12 dB PreTape Level Control)-...(+) - API 500 Format- Tape saturation emulator- Trim control (+/-12 dB PreTape Level Control)- Tape saturation effect can be set in a ·stepless manner- Silk function (Silk Red & Silk Blue) can be set in a ·stepless manner- Blend potentiometer determines the balance of Pre and Post-Tape signals- The tape characteristic can be switched between 15 IPS and 30 IPS- Drive Meter shows the Signal Level on the "Record Headf"- Enclosure: API Serie 500 Rack Format |
|
| Rupert Neve Designs : Shelford Channel
(8 comments)
- With transformer gain preamp, DI, inductor EQ and diode bridge compressor- Mic gain and ...(+) - With transformer gain preamp, DI, inductor EQ and diode bridge compressor- Mic gain and mic trim- 48V phantom power and polarity switchable- Tunable low-cut from 20 - 250 Hz- DI-In and -Thru- 3-band EQ with parametric depths (35, 60, 100, 220 Hz), parametric centers (220, 400, 900, 1800, 3500, 7500 Hz) and switchable Q factor, treble (8, 16 kHz)- Diode bridge compressor with adjustable threshold (-25 to +20), ratio (1.5: 1, 2: 1, 3: 1, 4: 1, 8: 1), gain (-6 to +20 dB) and timing (Fast , MF, Medium, MS, Slow, Car)- Blend for parallel compression- HPF (from preamp section) to sidechain- Compressor link option- Pre-EQ option- Silk function (Red, Blue), infinitely variable- VU meter (output level / level reduction)- Internal power supply, automatically switches from 100 to 240V AC, 50-60 Hz if necessary- Format: 19 "/ 1U |
|
| Rupert Neve Designs : Master Buss Processor Black
(6 comments)
- Stereo link or 2x mono- 75 V technology- Catch-up gain -6 dB up to +20 dB- Parallel comp...(+) - Stereo link or 2x mono- 75 V technology- Catch-up gain -6 dB up to +20 dB- Parallel compression adjustable- Texture control for Silk and Silk+ mode- Musical limiter- Stereo field editor- Flexible routing allows independent dynamic processing of mid and side channels- Extensive level meter- Input/output connectors: XLR- Sidechain send/return connector: 6.3 mm jack- Ground lift switch- Format: 19" / 2 U- Weight: 9.7 kg |
|
| Rupert Neve Designs : RNHP
(22 comments)
- Based on the headphone amplifier section of the Rupert Neve Designs 5060 Centerpiece- Th...(+) - Based on the headphone amplifier section of the Rupert Neve Designs 5060 Centerpiece- Three switchable inputs (XLR, RCA, mini-jack)- Solid steel housing- Output impedance: 0.08 Ohm at 1KHz- Frequency response: +/- 0.2 dB from 10 to 12,0000 Hz- Power supply: 24 V via an external 6 Watt power supply unit (included in the scope of delivery)- Dimensions (W x D x H): 165 x 117 x 48 mm |
|
| Rupert Neve Designs : Portico 511
(39 comments)
- 1 Channel Mic preaamp with 500 Module formfactor- +48V Phantom power can switched On and...(+) - 1 Channel Mic preaamp with 500 Module formfactor- +48V Phantom power can switched On and Off- 8 Segment LED Level-Meter- High Pass Filter can be set, 20 - 250 Hz- Trim and Gain-Control- Polarity is reversible/can be switched- Silk Mode- Formfactor: 500 Module- Required voltage/power: +/-16VDC 100 mA |
|
| Rupert Neve Designs : RNDI
(72 comments)
- Superior phase coherence- Rupert Neve custom transformer- Input headroom of +21.5 dBU- P...(+) - Superior phase coherence- Rupert Neve custom transformer- Input headroom of +21.5 dBU- Power supply 48 V phantom power- Ground lift- Instrument and speaker mode for various applications- Connections: in - 6.3 mm jack, thru - 6.3 mm jack, out - XLR |
|
| Rupert Neve Designs : R6
(24 comments)
- 8 Channels I/O with XLR, jack and SubD/DB25 connectors- LED Metering for electricity con...(+) - 8 Channels I/O with XLR, jack and SubD/DB25 connectors- LED Metering for electricity consumption monitoring- 48V Phantom power available per channel- +/- 16 VDC- Channel 7-8 thru connections can be used as a way to quickly and easily convert your signal from/to DB-25, XLR, and TRS connectors- 3 Link jumpers can be set to allow linking on channels 1-2, 3-4 and 5-6- Solid steel chassis- Dimensions (L x W x H): 330 x 190 x 139 mm- Weight: 4.31 kg |
|
| Rupert Neve Designs : R6 Rackmount Kit
(3 comments)- Rack mount kit for RND Portico R6 |
|
| Rupert Neve Designs : Portico 551
(6 comments)
- Low EQ: +/-15 dB shelf or peak- Selectable for 35 Hz, 60 Hz, 100 Hz or 220 Hz- Mid EQ: +...(+) - Low EQ: +/-15 dB shelf or peak- Selectable for 35 Hz, 60 Hz, 100 Hz or 220 Hz- Mid EQ: +/-15 dB with 6 centre frequencies: 200 Hz, 350 Hz, 700 Hz, 1.5 kHz, 3 kHz and 6 kHz- High / Peak switch to increase the Q-factor- Hi shelf: +/-15 dB shelf or peak, selectable for 8 kHz and 16 kHz- Lo cut: 12 dB / octave design at 80 Hz- Rupert Neve custom transformer- Design: API series 500 rack format |
|
| Rupert Neve Designs : Portico 5211
(3 comments)
- Up to 72 dB gain in 6 dB steps with +/- 6 dB trim- Phase reversal- 48 V phantom power- I...(+) - Up to 72 dB gain in 6 dB steps with +/- 6 dB trim- Phase reversal- 48 V phantom power- Infinitely variable LoCut from 20 Hz to 250 Hz- Silk mode with variable saturation adjustment- Rupert Neve Custom transformer- Eight-Segment LED Level Meter- Inputs: 2x XLR- Outputs: 2x XLR (Line Out), 2x XLR ( -6 dB Out) |
|
| Rupert Neve Designs : R10
(8 comments)
- XLR and 6.3 mm jack input and output per channel- LED display for power consumption- VCA...(+) - XLR and 6.3 mm jack input and output per channel- LED display for power consumption- VCA buses in channels 1-2, 3-4, 5-6, 7-8, 9-10 can be activated in pairs via ink jumpers- Integrated power supply 90 - 240V- Type: 19" |
|
| Rupert Neve Designs : MBC Master Buss Converter
(1 comments)
- 24 Bit / 192 kHz converter- Converter input with switchable signal path: transformerless...(+) - 24 Bit / 192 kHz converter- Converter input with switchable signal path: transformerless class A signal path or via interstage audio transformer with RND Silk Red and Blue circuit- Analog limiter section with class A line amplifier stage up to 20 dB- Controllable threshold and release- Switchable sidechain connection with tunable high-pass filter from 20 - 250 Hz- Limiter can be used either in dual mono or stereo mode- Analog inputs: 2x XLR- Digital outputs: AES, S / PDIF, TOSLINK- Word Clock In / Out- 2 x 22-segment level LED meters- 2 x 8-segment gain reduction LED meters- Peak hold option- Format: 19"/ 1 U- Weight: approx. 4 kg |
|
| Rupert Neve Designs : RNDI-S
(6 comments)
- With Rupert Neve Custom Transformer- Input headroom of +21.5 dBU- Power supply via 48 V ...(+) - With Rupert Neve Custom Transformer- Input headroom of +21.5 dBU- Power supply via 48 V phantom power- Ground lift switch per channel- 2x Input 6.3 mm jack- 1x 3.5 mm mini jack- 2x Thru 6.3 mm jack- 2x XLR output |
|
| Rupert Neve Designs : Portico 543
(7 comments)
- Preamplification: stepless from 6 dB to +20 dB- Threshold range: stepless from 36 dB to ...(+) - Preamplification: stepless from 6 dB to +20 dB- Threshold range: stepless from 36 dB to + 22 dB- Ratio range: stepless from 1.1: 1 to limit (40: 1)- Attack range: stepless from 20 mS to 75 ms- Release range: infinitely variable from 100 ms to 2.5 seconds- FF / FB: Feed-Forward or Feed-Back VCA control- Maximum output level: balanced and floating transformer output- Max. Output from 20 Hz to 40 kHz is +23 dBu- Total Harmonic Distortion and Noise: @ 1 kHz- +20 dBu output level- No load- Main Output, compressor bypassed: better than 0.0006%- Main Output, compressor activated: better than 0.02%- Noise: measured at the main output- Unweighted- 22 Hz-22 kHz- Terminated 40 Ohms- Frequency range: Main output- Unity Gain @ 18 Hz- +/- 3 dB. @ 150 kHz 3 dB- Crosstalk measured channel to channel: 90 dB @ 15 kHz- Monitor INPUT LEVEL and GAIN REDUCTION- Construction: API Series 500 rack format |
|
| Rupert Neve Designs : Portico 517
(5 comments)
- With Vari-phase, Silk and DI / mic blend- Frequency range: Main output, no load, -0.2 dB...(+) - With Vari-phase, Silk and DI / mic blend- Frequency range: Main output, no load, -0.2 dB @ 10 Hz -3 dB @ 160 kHz- Noise: measured at main output, unweighted, 22 Hz-22 kHz- Microphone gain up to 66 dB- DI gain from 0db to 30dB- Maximum Output Level: from 20 Hz to 40 kHz +23 dBu- Total harmonic distortion and noise: @ 1 kHz, + 20 dBu output: Main Output: better than 0.001% at 20 Hz, +20 dBu Output: Main Output: better than 0.002% Silk activated: better than 0.2% Second Harmonic- Crosstalk (measured from channel to channel): better than -90 dB @ 15 kHz- Phantom Power: +48 Volts DC +/- 1%- Construction: API Series 500 rack format |
|
| Rupert Neve Designs : Portico 535
(4 comments)
- Threshold range: Adjustable from -25 dB to +20 dB in 31 rasterized steps- Ratio: Switcha...(+) - Threshold range: Adjustable from -25 dB to +20 dB in 31 rasterized steps- Ratio: Switchable from 1.5: 1 to 8: 1 in six steps- Timing rotary switch: Six-digit rotary switch, with which the attack and release times of the compressor are adjusted- FAST switch: Shares the attack and release times of the timing presets- BLEND knob to mix dry and wet signal- Link function- Sidechain HPF at 150 Hz- Rasterized gain amplifier from -6 dB to +20 dB in 31 steps- 8-Segment LED meter for level and level reduction- Type: 500 Module |
|
| Rupert Neve Designs : Portico 5017
(13 comments)
- Microphone preamp and DI box with compressor- Two channel operation with crossfading- Si...(+) - Microphone preamp and DI box with compressor- Two channel operation with crossfading- Silk-circuit- Microphone gain up to 66 dB- DI-Gain up to 30 dB- Balanced / unbalanced Hi-Z input- 48 V Phantom power- Phase reversal- Threshold control in compressor- Flexible adjustment via internal jumpers |
|
| Rupert Neve Designs : 5254
- Custom transformers and Class A line amplifiers- Stereo link or 2x mono- Integrated para...(+) - Custom transformers and Class A line amplifiers- Stereo link or 2x mono- Integrated parallel compression- Input impedance: 10 kOhm- Output impedance: 40 ohms- Maximum input level (+ 4dBu selected): +26.7 dBu- Maximum output level: +26.7 dBu- Noise (22 Hz - 22 kHz BW): -104 dBu- Frequency response (10 Hz to 120 kHz): +/- 0.25 dB- THD + N @ 1 kHz @ maximum level (22 Hz - 22 kHz BW): 0.0008%- Compressor Noise Specifications: Noise at 0dB Make-Up Gain (22 Hz - 22 kHz BW): -84.5 dBu, Noise at + 20dB Make-Up Gain (22 Hz - 22 kHz BW): -64.5 dBu- Gridded control elements with 31 levels- Input / output connectors: XLR- Sidechain send / return connection: 6.3 mm jack- Ground lift switch- Dimensions: 19" 1U- Weight: approx. 4 kg |
|
| Rupert Neve Designs Portico 5017 Microphone Preamp Di Variable Phase Compressor
Comprised of a rugged, portable chassis with world class Portico pre-amp, compressor and D...(+) Comprised of a rugged, portable chassis with world class Portico pre-amp, compressor and DI circuits as well as two channel operation, variphase, silk and DI/mic blending capabilities, the Portico 5017 is an innovative and powerful tool for recording or live performance. In replacing the Portico 5016 Mic Pre / Variphase DI, the 5017 Mobile DPC adds single knob compression, DI / Mic Pre blending, and a go anywhere design to a well established classic. With Portico Series custom transformers and silk mode, the Mobile DPC s sonic signature is nothing short of legendary. It s the 5017 s revolutionary feature set however that make it an indispensable tool for studio recording, live recording and stage performances. Dual Channel Use Used as a two channel device, a lead singer and guitar player, can take the classic studio quality of the 5017 wherever they go; using the DPC for a Vocal mic pre and compressor, as well as a separate DI preamplifier. To achieve this, the blend control should be selected as fully DI (blend off), and an internal jumper can be selected to apply the compressor to the mic pre signal. When engaged, Silk mode would effect both vocal and guitar tracks, and the HPF control would effect only the mic path. Blended Use Used as a single channel device for instruments, the 5017 can be used to phase align, combine and compress direct and amplified signals. To achieve this, use the DI for the instrument s direct signal and the mic preamp for the speaker cabinet signal. The blend control is used for mixing direct and amplified signals to achieve the desired tonal blend between the two sources, and the variphase is used to minimize or extenuate phase cancellations between the two signals. To compress the blended signal, the internal compressor jumper must be set to the blend path (this is the default setting). This technique could also be used to create a single, mixed output of a guitar and vocals. The Compressor Based around a new LDR (light dependent resister) design, the 5017 s opto-coupler compressor has been simplified to a single threshold control with auto make up gain. By default, the compressor is set to a fixed 2:1 ratio with an internal jumper to change between standard and fast time constants. To set the compressor, simply dial the threshold control down until the desired amount of compression is achieved. An LED light indicates when the compressor is active. Vari-Phase In addition to the standard polarity reverse, the 5017 also incorporates a vari-phase control to adjust the phase incrementally. This control is useful any time two signals derived from the same source are combined. For instance, even with careful placement, the combination of close miced drums and overheads, can often yield hollow sounding results. By using the variable phase adjust, the direct signal can be phase rotated until the signals are naturally aligned. This technique is also extremely useful when combined with the internal blend control on instruments. A bassist, using both direct and miced signals can blend the two into a single output, using the vari-phase to reach an optimal alignment. By adjusting the phase in the 5017, the musician or engineer can find the absolute best mic position without regard to the phase relation to the direct signal. With the 5017, the Portico sound is always within reach. |
|
(Change geographical area)
Rupert-Neve-Designs
