| Strymon : Ojai R30
(64 comments)
- The fully analog circuit provides two stages of isolation, which completely eliminates g...(+) - The fully analog circuit provides two stages of isolation, which completely eliminates ground loop and AC line noise issues- Automatic international power supply compatibility- Connect 2 or 3 Ojai units together and supply a combination of up to 15 pedals powered by a single 24 V power supply- Output 1-3: 9 V DC @ 500 mA (individually isolated)- Output 3-4, switchable: 9 V DC @ 500 mA, 12 V DC @ 375 mA & 18 V DC @ 250 mA (individually isolated)- Powered via 24 V DC power supply (included)- Dimensions (W x D x H): 130 x 58 x 29 mm- Weight: 171 g- Includes 5 cables: 5.5 x 2.1 mm angled barrel connector to 5.5 x 2.1 mm angled barrel connector; length 45.7 cm- Made in the USA |
|
| Strymon : Brigadier
(34 comments)
- 3 Delay modes: short, medium, long- Taptempo switch- Taptempo modes for quarter, dotted ...(+) - 3 Delay modes: short, medium, long- Taptempo switch- Taptempo modes for quarter, dotted eighth and eighth triads- Adjustable boost or cut +/- 3 dB- Filter control for tone and repetitions- Stereo output- Expression pedal connection- True Bypass- Power supply via 9V DC Standard power supply (included)- Suitable footswitch: Art.313984 (not included)- Suitable expression pedal: Art.195660 (not included- Made in USA |
|
| Strymon : Riverside
(48 comments)
- Overdrive / Distortion- Cascading amplification stages produce natural and harmonious so...(+) - Overdrive / Distortion- Cascading amplification stages produce natural and harmonious sounds from silky, clean overdrive to extreme distortion- The analogue JFET input stage ensures uncompromising dynamics and response- Via Strymon Midi-Exp cable (Art.448709 - not included) you can store and load presets- Controls: Drive, Level, Bass, Middle and Treble- Switch: Gain, Push and Presence- True Bypass- Boost input for foot switch (Art.313984, not included)- Power consumption: 250 mA- Dimensions (W x H x D): 102 x 44 x 114 mm- Robust and light gold anodized aluminium housing- Includes 9 V power supply- Made in USA |
|
| Strymon : Timeline
(401 comments)
- Delay- 12 Selectable delay types- Adjustable delay modulation- Independent delay and mix...(+) - Delay- 12 Selectable delay types- Adjustable delay modulation- Independent delay and mix level controls- 200 presets- Analogue signal path for the dry signal- Integrated looper with up to 30 seconds recording time- Loop-in path to enable further sound shaping of the delay by external effects- Controls: Type, Value, Time, Repeats, Mix, Filter, Grit, Speed, Depth- LED: Effect A On/Loop record, Effect B On/Loop play, Tap Tempo/Looper active- LED display- Footswitch: Effect A On/Loop record, Effect B On/Loop play,- Tap/Enter Exit Loop- Mono/stereo input: 2x 6.3 mm jack plug- Mono/stereo output: 2x 6.3 mm jack plug- EXP In: 6.3 mm jack- Midi In- Midi Out- Mains adapter connection: Barrel connector 5.5 x 2.1 mm, negative polarity inside- Power consumption: 300 mA- Power supply with a 9 V DC mains adapter (included in delivery, suitable spare mains adapter: Art.409939)- Switchable true/buffered bypass- Dimensions (W x D x H): 171 x 127 x 47 mm- Made in USA |
|
| Strymon : Deco
(84 comments)
- Tape Saturation, Tape Echo, Tape Chorus, Tape Flanger- Controller for saturation, volume...(+) - Tape Saturation, Tape Echo, Tape Chorus, Tape Flanger- Controller for saturation, volume, blend, lag time and wobble- Minitoggle switch: Sum, Invert and Bounce- Tape Saturation Bypass- Double Track Bypass- 24 bit / 96 kHz A / DD / A converters- Metal housing- True bypass- Incl. 9V power supply- Made in USA |
|
| Strymon : Ojai R30 Expansion Kit
(17 comments)
- To supplement an existing Strymon power system- Flat profile- Switched-mode power supply...(+) - To supplement an existing Strymon power system- Flat profile- Switched-mode power supply technology- The 24 V thru output enables expansion with the OJAI and the OJAI R30 (sold separately)- Connections: Output 1-3: 9 V DC @ 500 mA (individually isolated) - Output 4 & 5 : 9 / 12 / 18 V DC @ 500 / 375 / 250 mA (individually isolated)- Dimensions (W x D x H): 130 x 58 x 29 mm- Weight: 171 g- Made in the USA- EIAJ-05 power adapter cable (45.7 cm long, to connect the Ojai to a PS-124, Zuma or Zuma R300 power supply)- 5 Pedal cables: 5.5 x 2.1 mm angled barrel connector to 5.5 x 2.1 mm angled barrel connector, length: 45.7 cm |
|
| Strymon : Ojai
(117 comments)
- 5 Fully insulated high current 9 V DC / 500 mA outputs- Power supply and IEC power cable...(+) - 5 Fully insulated high current 9 V DC / 500 mA outputs- Power supply and IEC power cable included- 24 V thu jack allows connection to additional Strymon Ojai (sold separately)- Dimensions: 81 x 58 x 33 mm- Weight: 130 g- Including 5 pedals: 5.5 x 2.1 mm coaxial connector - negative pole inside, angled to straight connector- Made in USA |
|
| Strymon : Zuma Mounting Brackets
- These brackets are used to attach the Strymon Zuma Multi power supply under a pedal boar...(+) - These brackets are used to attach the Strymon Zuma Multi power supply under a pedal board- Compatible with: Pedaltrain PT-3 / Pro / Grande, Pedaltrain Novo 18/24/32, Pedaltrain Classic Jr / 2 / Pro, Pedaltrain Terra 42 (not compatible with older Pedaltrain boards PT-1, PT-2, PT-JR) |
|
| Strymon : MIDI-EXP Cable AA
(14 comments)
- MIDI angled plug to 6.3 mm stereo angled pawl- Allows loading up to 300 presets into Sun...(+) - MIDI angled plug to 6.3 mm stereo angled pawl- Allows loading up to 300 presets into Sunset and Riverside pedals- Full control of all knobs and switches via MIDI- Saving and recalling presets in the bypass state- Enable the perfect drive setting for solos |
|
| Strymon : Cloudburst Reverb
(14 comments)
- Several different reverb types, from natural-sounding small rooms to expansive atmospher...(+) - Several different reverb types, from natural-sounding small rooms to expansive atmospheres - all with a single control- Ensemble subtly adds a harmonically rich room reverb or a lush synthetic string reverb under your guitar playing- Controls: Mix, Mod, Tone, Pre-Delay, Decay- Switch: Ensemble off/mp/forte, I/O mode selector mono/mono/stereo/stereo- LED: Effect on- Footswitch: Effect bypass- Mono/stereo input: 6.3 mm stereo jack- Mono/stereo output: 6.3 mm stereo jack- EXP/MIDI: 6.3 mm stereo jack- Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole internal- Power consumption: 250 mA- Power supply via 9 V battery or 9 V DC mains adapter (suitable mains adapter art. 409939, not included)- True bypass- Dimensions (W x D x H): 43 x 114 x 56 mm |
|
| Strymon : Lex V2
- Rotary speaker effect unit- Detailed replica of a real rotary speaker- New user interfac...(+) - Rotary speaker effect unit- Detailed replica of a real rotary speaker- New user interface with extended control options- 2 Selectable microphone positions: Front, Rear- 3 Selectable horn speeds: Slow, Med, Fast- Effect can be turned off momentarily via Rotary Break function- Bi-amping function to send bass rotor signal and horn rotor signal separately through left and right outputs- Full MIDI integration via TRS-MIDI or USB-C MIDI- Up to 300 presets storable via MIDI- Premium JFET analog front end- New 520MHz ARM Superscalar processor- 24-bit 96kHz A/D D/A converter- Controls: Speed, Mic Distance, Horn Level, Preamp Drive, Volume, Dry- Switches: Mic, Ramp, Mono/Stereo- LED: Slow/Fast, Effect On- Footswitch: Slow/Fast, Effect On- Connectors: Input (6.3 mm TRS jack), Output L/R (6.3 mm jack), EXP/MIDI (6.3mm TRS jack), USB-C- Power adapter connector: Hollow female plug 5.5 x 2.1 mm, negative pole inside- Power consumption: 300mA mA- Powered by a 9 V DC mains adapter (included)- True bypass- Dimensions (W x D x H): 102 x 114 x 44 mm- Made in USA |
|
| Strymon : Iridium Amp and IR Cab
(114 comments)
- 24 bit/96 kHz 500 millisecond IR specification offers extremely detailed amp/cab simulat...(+) - 24 bit/96 kHz 500 millisecond IR specification offers extremely detailed amp/cab simulations- 3 Matrix-modelled amplifier models based on some of the most sought-after American and British amplifiers- 4 Presets (3 plus onboard favourite) with a MultiSwitch Plus (300 via MIDI)- 9 Directly selectable IR cabinet models (300 via MIDI)- USB port for loading IR files and firmware updates- Load your own impulse responses with the free Strymon Impulse Manager software- Headphone connection enables silent rehearsals and latency-free monitoring- Controls: Drive, Level, Bass, Middle, Treble, Room- Switches: Amp Mode, Cab Mode- LED: Effect on, Favorite- Footswitch: Effect bypass, Favorite- Mono/Stereo input via 2 x 6.3 mm jack- Mono/Stereo output via 2 x 6.3 mm jack- EXP input- Power adapter connection: Barrel plug socket 5.5 x 2.1 mm, negative polarity inside- Power supply via 9 V DC power adapter (included)- Dimensions (W x D x H): 102 x 114 x 44 mm- Made in USA |
|
| Strymon : Big Sky
(376 comments)
- Reverb- 12 different studio class reverb machines, Rooms, Reverbs, Plates and Springs- 3...(+) - Reverb- 12 different studio class reverb machines, Rooms, Reverbs, Plates and Springs- 300 programmable user presets- Press-and-hold sustain and Freeze function (infinite)- Extreme settings- Fully controllable by midi- Ultra low noise 24-bit 96 kHz converter- Controller for: Decay, Pre-Delay, Mix, Tone, Mod, Low end, Mid and Size- LED status display- Patch display- Stereo input and output- Toggle switch for feedback loop- Expression pedal input (can be saved and controlled)- Incl. 9V power supply (female DC)- Made in USA |
|
| Strymon : Riverside Bundle PS J RB
Strymon Riverside Effect Pedal for Electric Guitar-
Overdrive / Distortion-
Cascading am...(+) Strymon Riverside Effect Pedal for Electric Guitar-
Overdrive / Distortion-
Cascading amplification stages produce natural and harmonious sounds from silky, clean overdrive to extreme distortion-
The analogue JFET input stage ensures uncompromising dynamics and response-
Via Strymon Midi-Exp cable (Art.448709 - not included) you can store and load presets-
Controls: Drive, Level, Bass, Middle and Treble-
Switch: Gain, Push and Presence-
True Bypass-
Boost input for foot switch (Art.313984, not included)-
Power consumption: 250 mA-
Dimensions (W x H x D): 102 x 44 x 114 mm-
Robust and light gold anodized aluminium housing-
Includes 9 V power supply-
Made in USA Rockboard Pedalsafe Type J Rockboard Protective Cover-
Suitable for medium size Strymon effect pedals-
Suitable for most effect pedals with housing dimensions of approx. 115 x 100 x 47 mm-
With base plate for mounting on Rockboard pedalboards with click system-
Distance of QuickMount mounting holes (W x D): 76 x 96 mm-
Protects effect pedals from dirt and weather-
Protects settings from unintentional adjustment-
Mounts effect pedals securely on RockBoard pedalboards-
No permanent modifications required-
Includes QuickMount pedal mounting plate Type J for RockBoard pedalboards |
|
| Strymon : Ojai Expansion Kit
(40 comments)
- To complement an existing Strymon Power System- Flat profile- Switching power supply tec...(+) - To complement an existing Strymon Power System- Flat profile- Switching power supply technology- The 24V Thru output allows for expansion with OJAI & OJAI R30 (sold separately)- Connections: Output 1 - 5: 9 V DC @ 500 mA (individually isolated)- Length: 45.7 cm- Dimensions: (W x D x H) 81 x 58 x 33 mm- Weight: 133 g- Included cables: EIAJ-05 power adapter cable (45.7 cm long, for connecting Ojai to the PS-124, Zuma or Zuma R300 power supply)- Includes 5 cables with 5.5 x 2.1 mm coaxial plug on both sides- Made in USA |
|
| Strymon : EIAJ Cable 9"
(11 comments)
- To connect a Strymon Ojai power supply to the supplied Power Block (PS-124) or to anothe...(+) - To connect a Strymon Ojai power supply to the supplied Power Block (PS-124) or to another Strymon multi-power supply (Ojai + Zuma, Ojai + Ojai) for added flexibility- Connections: EIAJ-05 straight - EIAJ-05 right-angled- Cable 6- Length: 23 cm (9 ") |
|
| Strymon : Deco Plugin
(3 comments) |
|
| Strymon : ZelZah Dual Phaser
(4 comments)
- 2 Completely independent phasers that can be operated separately: in series, in parallel...(+) - 2 Completely independent phasers that can be operated separately: in series, in parallel or splitted- 6-Stage phaser with smooth transition from phasing to flanging to chorus, all with adjustable resonance- 4-Stage phaser with 3 sweep modes: Classic (traditional rising and falling LFO with voicings that change character with DEPTH knob setting), Barber (constant rising LFO with +ve or -ve polarity) and Envelope (touch-sensitive envelope), independently accessible via footswitch and set of controls- True Bypass- 'Voice' control morphs between phasing and flanging/chorus- 6-Stage knob: Speed, Depth, Voice- 4-Stage control: Speed, Depth, Mix- Switch: Input Mono/Stereo- Switch 6-Stage: Resonance- Switch 4-stage: Sweep- LED: 6-stage on, 4-stage on- Foot switch: 6-stage bypass, 4-stage bypass- Mono/stereo input: 6.3 mm stereo jack- Mono/stereo output: 2x 6.3 mm stereo jack- EXP In: 6.3 mm stereo jack- EXP/MIDI: Connection of a Strymon MiniSwitch (art. 404546 - not included) for selecting a favourite setting, a Strymon MultiSwitch Plus (art. 465346 - not included) for access to 3 presets or a MIDI controller either to a Strymon Conduit (art. 521393 - not included) or a Strymon MIDI EXP cable (not included) for access to 300 preset memories- Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside.- Power supply with a 9 V DC mains adapter (included)- Dimensions (W x D x H): 178 x 114 x 44 mm- Made in USA |
|
Strymon
