| Morley : 20/20 Bad Horsie Wah
Pour guitare électrique- Signature Steve Vai- Mini Wah Wah- Circuit optique- Design sans ...(+) Pour guitare électrique- Signature Steve Vai- Mini Wah Wah- Circuit optique- Design sans commutateur- Tampon (Buffer) 20/20 intégré empêchant la perte de signal- 2 modes Wah commutables (Bad Horsie/Contour Wah)- Convient également pour les basses ou claviers- Couvercle de la pile Quick-Clip- Buffered Byass- Contrôles: Level, Contour- Commutateur au pied Contour Wah (commutateur silencieux)- LEDs de statut- Boîtier en acier laminé à froid- Logo Glow-in-the-Dark- Entrée/sortie sur Jack mono 6,3 mm- Fonctionne avec une pile 9V- Bloc d'alimentation 9 V DC (fiche cylindrique 2,1 x 5,5 mm, polarité négative à l'intérieur) optionnel non-fourni- Consommation de courant: 12 mA- Dimensions (L x l x H): 171 x 114 x 70 mm- Poids: 0,92 kg |
|
| Morley : MTPFW 20/20 Power Fuzz Wah
Pour guitare électrique- Circuit optique- Design sans commutateur- Section Fuzz située a...(+) Pour guitare électrique- Circuit optique- Design sans commutateur- Section Fuzz située après l'effet Wah dans le chemin du signal- 2 modes Fuzz commutables: Vintage, Modern- Tampon (Buffer) 20/20 intégré empêchant la perte de signal- Couvercle de la pile Quick-Clip- Buffered Bypass- Contrôles: Wah Level, Intensity, Fuzz Level- Commutateur au pied Fuzz Type (commutateur silencieux)- Commutateur au pied Fuzz (commutateur silencieux)- LEDs de statut- Boîtier en acier laminé à froid- Logo Glow-in-the-Dark- Entrée/sortie sur Jack mono 6,3 mm- Fonctionne avec une pile 9V- Bloc d'alimentation 9 V DC (fiche cylindrique 2,1 x 5,5 mm, polarité négative à l'intérieur) optionnel non-fourni- Consommation de courant: 9 mA- Dimensions (L x l x H): 170 x 114 x 70 mm- Poids: 920 g- Fabriquée aux USA |
|
| Morley : Humno Noise Eliminator (7 comments)
Eliminates unwanted noise- Plugs in between the power cable and the power-in of the unit- ...(+) Eliminates unwanted noise- Plugs in between the power cable and the power-in of the unit- Standard IEC connector- No ground lift- Suitable for: 100V - 240V / 50Hz - 60Hz- Max. 6 amperes current- Power-On LED- Made in USA |
|
| Morley : 20/20 Power Wah (5 comments)
Pour guitare, basse ou clavier- Large gamme de balayage- Ton Vintage- Circuit optique- Tam...(+) Pour guitare, basse ou clavier- Large gamme de balayage- Ton Vintage- Circuit optique- Tampon (Buffer) 20/20 intégré empêchant la perte de signal- Couvercle de la pile Quick-Clip- Buffered Bypass- Contrôle Wah Boost- Commutateur au pied Wah (commutateur silencieux)- LEDs de statut- Boîtier en acier laminé à froid- Logo Glow-in-the-Dark- Entrée/sortie sur Jack mono 6,3 mm- Fonctionne avec une pile 9V- Bloc d'alimentation 9 V DC (fiche cylindrique 2,1 x 5,5 mm, polarité négative à l'intérieur) optionnel non-fourni- Consommation de courant: 6 mA- Dimensions (L x l x H): 171 x 114 x 70 mm- Poids: 920 g- Fabriquée aux USA |
|
| Morley : ABY-G Gold Series A/B/Y Switch (3 comments)
Permet un routage flexible des signaux- Utilisable comme sélecteur d'entrée ou de sortie...(+) Permet un routage flexible des signaux- Utilisable comme sélecteur d'entrée ou de sortie- Une entrée vers deux sorties sélectionnables ou deux entrées sélectionnables vers une sortie- Sélectionnable entre A ou B (simple) ou A et B (combiné)- Commutateurs au pied: A and B, A or B- LEDs de statut- Boîtier en acier laminé à froid- Couvercle de la pile Quick-Clip- 3 entrées/sorties sur Jack mono 6,3 mm- True Bypass- Connexion pour alimentation secteur sur prise cylindrique 2,1 x 5,5 mm, polarité négative à l'intérieur- Fonctionne avec une pile 9V- Bloc d'alimentation 9 V DC adapté optionnel non-fourni- Fonctionnement passif sans alimentation possible (LEDs de statut inactives)- Dimensions (L x l x H): 133 x 82 x 51 mm- Poids: 390 g |
|
| Morley : ABY PRO Selector
Transformateur d'isolation Ebtech Custom 1:1 pour un son absolument transparent et contre ...(+) Transformateur d'isolation Ebtech Custom 1:1 pour un son absolument transparent et contre les pertes de volume- Commutation silencieuse empêchant les bruits parasites- Commutateur au pied A- Commutateur au pied B- LEDs de statut- Boîtier en métal- Entrée sur Jack mono 6,3 mm- 2 sorties (A/B) sur Jack mono 6,3 mm- Fonctionne avec une pile 9V- Bloc d'alimentation 9 V DC Morley ADN (fiche cylindrique 2,1 x 5,5 mm, polarité négative à l'intérieur) optionnel non-fourni- Consommation: 64 mA- Dimensions: 140 x 90 x 71 mm- Poids: 660 g- Remarque: Ne pas utiliser avec des enceintes actives - Peut endommager l'amplificateur et les enceintes! |
|
| Morley : MTLW2 - 20/20 Lead Wah Boost (1 comments)
Circuit optique- Design sans interrupteur- Wah et boost activés automatiquement lorsque l...(+) Circuit optique- Design sans interrupteur- Wah et boost activés automatiquement lorsque la pédale est enfoncée- Tampon 20/20 intégré pour empêcher la perte de signal- Caractère sonore identique aux 20/20 Lead Wah et 20/20 Wah Boost- Potentiomètre Boost à 12h pour l'étage de gain de la wah lead classique- Le boost réglable fonctionne également sous gain unitaire (10 heures) si nécessaire- Large plage de balayage- Inducteur Custom MQ2- LED de statut- Boîtier en acier laminé à froid- Logo Glow-in-the-Dark- Couvercle de la pile Quick-Clip- Buffered Bypass- Entrée/sortie sur Jack mono 6,3 mm- Connexion pour alimentation secteur sur prise cylindrique 2,1 x 5,5 mm, polarité négative à l'intérieur- Fonctionne avec une pile 9V optionnelle non-fournie- Bloc d'alimentation 9 V DC (MO AD 9V 1A) optionnel non-fourni- Consommation de courant: 10 mA- Dimensions (L x l x H): 170 x 114 x 70 mm- Poids: 920 g |
|
| Morley : AFX-1 Analog Multi-FX (1 comments)
With wah, 2-channel distortion, stereo chorus and echo- Reissue circuits of legendary Morl...(+) With wah, 2-channel distortion, stereo chorus and echo- Reissue circuits of legendary Morley vintage effects: 2000 wah, 1990 distortion, 1980 chorus and 1970 echo- Stainless steel housing in the style of the first Morley chrome finishes of the 1970s- Switchless wah, automatically switches on when in use- Deactivation of the effect when the foot is removed- Wear-free optical wah circuit- Distortion: High, Mid and Low potentiometers- Pre and post gain- Switchable HiGain option- Stereo chorus: Rate and Depth controls- Stereo echo: Controls for delay time, repeats and mix- Loop-in placed between distortion and chorus- Premium buffer- Incl. OneSpot 9 V power supply (EU)- Dimensions (L x W x H): 304.8 x 174 x 69.9 mm |
|
| Morley Mark Tremonti Power Wah Pedal
Mark TREMONTI (CREED) vient de signer avec MORLEY un contrat qui fait mal ! Le résultat n...(+) Mark TREMONTI (CREED) vient de signer avec MORLEY un contrat qui fait mal ! Le résultat n'est autre que la Power Wah Signature TREMONTI, une pédale qui s'inscrit d'ores et déjà comme une référence en matière de wah-wah. La TREMONTI propose un boost pour accentuer le Wah, en plus des qualités communes aux autres Morley (cellule photo-électrique, régulateur de signal...) |
|
| Morley : Volume Commander
2 Channels switchable via footswitch, can be used independently or together- True Bypass- ...(+) 2 Channels switchable via footswitch, can be used independently or together- True Bypass- Volume control- Switch: Low-cut with three options (None, Fine, Deep), Tone (Bright, Warm)- LED display- Power supply via 9 V power supply unit or 9 V battery (not included)- Housing material: cold-rolled steel- Made in USA |
|
| MORLEY ABY-G Pour instruments : route une entrée vers deux sorties, ou deux entrées vers une sortie |
|
| MORLEY 20/20 POWER WAH VOLUME Combine une Wah et un volume, déclenchement par interrupeur au pied |
|
| Wah Pedals Morley 20/20 Classic Switchless Wah Wah Wah Wah Without Black Switch
La Classic Switchless Wah est équipée des caractéristiques qui ont fait la réputation ...(+) La Classic Switchless Wah est équipée des caractéristiques qui ont fait la réputation des pédales Wah. Vous obtenez une tonalité Wah-Wah classique avec notre inducteur MQ2, un circuit électro-optique fiable, une activation Switchless facile et sans à-coups, et notre circuit de mémoire tampon 20/20.SPÉCIFICATIONSFonctionnement sans interrupteur ; il suffit d'appuyer sur la pédale pour enclencher la Wah et de relâcher pour bypasser.Conçu pour gagner de la place sur votre pedalboard; 6.85″ x 4.5″ x 2.5″ (L x l x h)Notre célèbre conception électro-optique. Pas de potentionmètres à user !Tonalité Wah classique avec un inducteur MQ2 personnalisé.Le circuit Buffer 20/20 assure un son de guitare et une sortie purs.Pédale en caoutchouc phosphorescente et logo Morley.Alimenté par une pile 9 volts ou un adaptateur Morley 9V. Compatible avec la plupart des adaptateurs 9V.Boîtier robuste en acier laminé à froid, indication par LED, compartiment à pile à clip rapide. |
|
| Morley : Spare Part Pilot Bulb Morley Spare Part Pilot Bulb; Replacement bulb for all Morley pedals |
|
| Morley : Hum Eliminator Tool Box
Prevents ground loops that generate hum and buzz in the audio signal- Custom Morley isolat...(+) Prevents ground loops that generate hum and buzz in the audio signal- Custom Morley isolation transformers- Converts between balanced and unbalanced signals- Used on audio connections between interfering devices- Connected between device connection (input) and mains cable and filters unwanted mains noise- No ground lift- LED display- 6.3 mm jack and XLR sockets- Max. power consumption: 6 W- Suitable for 100 V - 240 V, 50 Hz- Dimensions (L x W x H): 196.8 x 127 x 76.2 mm |
|
| 20/20 Volume Plus Pedal
Morley Pedals. General Merchandise. Hal Leonard #MTMV2. Published by Hal Leonard (HL.32836...(+) Morley Pedals. General Merchandise. Hal Leonard #MTMV2. Published by Hal Leonard (HL.328362).
Item Number: HL.328362
4.75x7.75 inches.
Electro-Optical circuitry and audio taper allow smooth, studio quiet volume control. Minimum Volume knob is used for a smooth transition between rhythm and lead volumes. Minimum Volume control is now foot-switchable. Powers from one 9V battery or optional Morley adapter. LED Indication, cold-rolled steel housing, quick clip battery door and two-year warranty.
Features include:
• Electro-Optical Volume pedal is consistent and quiet (no pots to wear out)
• Audio taper allows smooth volume control or violin type swells
• Switchable Minimum Volume Control – use as either a Rhythm/Lead pedals or Volume pedal with the click of a switch
• Minimum Volume knob is used for a smooth transition between rhythm and lead volumes
• Powers from one 9-volt battery or optional Morley 9V adapter
• Cold-rolled steel housing, LED indication, quick clip battery door and two-year warranty
• Works with guitar, bass or keys. |
|
| Wah Pedals Morley 20/20 Power Fuzz Wah Wah Fuzz Grey
20/20 POWER FUZZ WAHPédale Wah FuzzgriseSans interrupteur, déclenchement à la pose du p...(+) 20/20 POWER FUZZ WAHPédale Wah FuzzgriseSans interrupteur, déclenchement à la pose du piedcircuit Morley optique éliminant les bruits de potentiomètreWah avec réglage de volumecircuit fuzz avec réglage d'intensité et de volumepotentiomètresonorité classique avec inducteur MQ2Buffersur pile 9V ou adaptateur DC 9Vindicateur de marche à LEDboitier métalDimensions (mm) : 174 (L) x 114 (p) x 63,5 (h) |
|
| MORLEY STEVE VAI BAD HORSIE 2 WAH Sans interrupteur, déclenchement à la pose du pied |
|
| Wah Pedals Morley 20/20 Wah Boost Wah Wah Wah With Grey Booster Morleygooddeal
20/20 WAH BOOSTPédale Wah Wah avec boostergriseSans interrupteur, déclenchement à la po...(+) 20/20 WAH BOOSTPédale Wah Wah avec boostergriseSans interrupteur, déclenchement à la pose du piedcircuit Morley optique éliminant les bruits de potentiomètreBoost +20 dB avec potentiomètre de réglagesonorité classique avec inducteur MQ2Buffersur pile 9V ou adaptateur DC 9Vindicateur de marche à LEDboitier métalDimensions (mm) : 174 (L) x 114 (p) x 63,5 (h) |
|
| MORLEY ABY-MIX-G
Pour instruments : route chaque entrée vers chaque sortie, dispose d un interrupteur au p...(+) Pour instruments : route chaque entrée vers chaque sortie, dispose d un interrupteur au pied pour chaque sortie avec un réglage de volume séparé |
|