| Palmer : Pro MCT DMX (5 comments)
- Tests 3-pin and 5-pin DMX cables for continuity- Also suitable to test 3-pin XLR microph...(+) - Tests 3-pin and 5-pin DMX cables for continuity- Also suitable to test 3-pin XLR microphone cables- Automatic test or manual pin selection- LED display- Power supply: 2 X AA batteries (not included)- Dimensions: 240 x 48 x 53 mm- Weight: 0.7 kg- Incl. Mounting bracket |
|
| NTI Audio : MR PRO Cable Test Connector (7 comments)- |
|
| Palmer : Cable Tester (118 comments)
Cable Tester- With LED error- indicator and battery indicator LED- Logical and unambiguous...(+) Cable Tester- With LED error- indicator and battery indicator LED- Logical and unambiguous LED indicator- XLR- 6.3 mm jack, unbalanced and balanced- Speaker twist- RCA- 5 pin DIN |
|
| Galaxy Audio : CM-C200 (11 comments)
- Class 2- Compliant to ANSI S1.40-1984 and IEC 942-1988- Calibration level: 94 dB and 114...(+) - Class 2- Compliant to ANSI S1.40-1984 and IEC 942-1988- Calibration level: 94 dB and 114 dB- For 1", 1/2" and 1/4" microphones- Weight approx. 200 g including battery- Including 9V-Battery and wind protection filter |
|
| Keith McMillen : Batt-o-Meter (58 comments)
- Full control of the battery status- For effect pedals, guitar, basses etc. as well as fo...(+) - Full control of the battery status- For effect pedals, guitar, basses etc. as well as for individual batteries- Connect Batt-o-Meter simply to the jack input of the device to be tested, keep the test button pressed and the battery power is displayed |
|
| Sound Tools : NL4 Sniffer/Sender (1 comments)
- With separate sender/ receiver plug for testing of distant speaker twist connectors- LED...(+) - With separate sender/ receiver plug for testing of distant speaker twist connectors- LED indicator- Including LED chart |
|
| Sound Tools : DMX Sniffer/Sender (3 comments)
- With seperate sender/receiver plug for testing of distant DMX-Connectors- LED Indicator-...(+) - With seperate sender/receiver plug for testing of distant DMX-Connectors- LED Indicator- Including LED chart |
|
| Rolls : MO 2020 (2 comments)
- Output for test signal- Sine and square-wave signals- 10 dB pad for calibration- Linear ...(+) - Output for test signal- Sine and square-wave signals- 10 dB pad for calibration- Linear 20-20,000 Hz |
|
| NTI Audio : MR-PRO 70/100V Protect Adapter (3 comments)- Protects MR-Pro against 70V / 100V back-up voltage for impedance measurements |
|
| Behringer : CT100 (546 comments)
Cable Tester- Micro-Processor-Controlled cable tester- For XLR, mono- and stereo-jack (3.5...(+) Cable Tester- Micro-Processor-Controlled cable tester- For XLR, mono- and stereo-jack (3.5 mm / 6.3 mm), TT, RCA and MIDI- Detection and indication of intermittent contacts- Test of phantom power and ground loops- Build in test tone generator- Battery operation with 2x 1,5 v AA batteries (Not included) |
|
| TFA : Thermo-Hygrometer Colour
- With coloured comfort levels for a healthy indoor climate- Hair synthetic- Casing with b...(+) - With coloured comfort levels for a healthy indoor climate- Hair synthetic- Casing with brass ring- Chrome plated- With a stand- To set up on the table or mount on the wall- Dimensions: 102 x 35 (80) x 102 (114) mm- Weight: 79 g |
|
| Thomann : NB 4.0
- 4 RCA signals transferrable via network cable over up to 670 meters- No transmition poss...(+) - 4 RCA signals transferrable via network cable over up to 670 meters- No transmition possible using a hub or the like- Operatable only with 2 devices- No power supply needed- Incl. mounting angle- Dimensions: 92 x 70 x 25 mm |
|
| Behringer : CT200
- 3 Modes: Cable Tester, Installed Cable Tester and Test Sound Mode- Equipped with inputs ...(+) - 3 Modes: Cable Tester, Installed Cable Tester and Test Sound Mode- Equipped with inputs and outputs for XLR, SpeakerTwist, 6.3 mm and 3.5 mm stereo jack, RCA, RJ45, MIDI and USB- LED display- Continuity testing and intermittent contact detection- Phantom power and ground test- Test tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV- Operation with 2 batteries AA (not included) |
|
| NTI Audio : MR Pro Minirator (26 comments)
Analogue Audio Signal-Generator- With sine, pink and white noise- Delay test signal- Polar...(+) Analogue Audio Signal-Generator- With sine, pink and white noise- Delay test signal- Polarity test signal- Sweep signal for every frequency range- Cable test function- Impedance and power measurement- Phantom power test- Load independent output level- 512 MB Flash-Memory with USB terminal ( for storage of wave files and configurations )- Graphical back-lit display- Inputs: XLR and USB- Outputs: XLR and RCA- Operates with 3x 1.5 v AA batteries (not included)- Including bumper, USB cable and hand loop- Separately available accessories: Belt bag, power supply and cable test plug- Optional PSU: Art.240762 |
|
| Sound Tools : XLR Sniffer/Sender (42 comments)
- With separate sender/receiver plug for testing of distant XLR connectors- LED Indicator-...(+) - With separate sender/receiver plug for testing of distant XLR connectors- LED Indicator- Including table of possible LED combinations |
|
| Millenium : SG-1
- With the built-in 1 Watt amplifier this device is ideal for (8 Ohm) speaker tests- Line ...(+) - With the built-in 1 Watt amplifier this device is ideal for (8 Ohm) speaker tests- Line output for active speaker or mixer tests- Tunable frequency between 20 Hz and 20 kHz- Power supply with 9V block battery- Output switchable between XLR line or speaker twist for the speaker test- Dimensions: 110 x 72 x 40 mm |
|
| NTI Audio : DR-2 Digirator
- Surround test sequences to check for Dolby Digital, Dolby Digital, Dolby E, Pro-Logic II...(+) - Surround test sequences to check for Dolby Digital, Dolby Digital, Dolby E, Pro-Logic II, DTS and DTS-HR installations- Synchronises AES3, DARS, word clock and video signals- Measurement of channel transparency- Signal delay and clock frequency- Test signals for sine / noise and polarity- Runtime measurement- Power supply via 3x 1.5 V AA batteries (not included)- Case and power supply available as an option |
|
| UNiKA : SPT-3rt (3 comments)
- For XLR cables, microphones and loudspeakers- Consists of transmitter and receiver- Inpu...(+) - For XLR cables, microphones and loudspeakers- Consists of transmitter and receiver- Inputs: XLR for an external dynamic microphone- Outputs: XLR- Input selection: Microphone / Line / EXT microphone- Output level adjustable- Dimensions: 120 x 95 x 56 mm- Weight: 0.4 kg- Power supply via 1x 9V battery per unit (not included) |
|
| Fischer Amps : PLP
Speaker Test Device- The ideal accessory for the sound engineer- Quick testing of speaker ...(+) Speaker Test Device- The ideal accessory for the sound engineer- Quick testing of speaker systems without additional equipment- 1 W Output power at 4/8 Ohms- Tunable sine frequency of 90 Hz up to 9 kHz- Power supply with 9V battery- Speaker Twist and XLR outputs- XLR output switchable between unbalanced and balanced- Sturdy aluminium housing- With stainless-steel belt clip |
|
| Thomann : CBT 10 (108 comments)
- Thomann CBT 10, compact battery tester, for 1.5 V batteries, 9V blocks and miniature cel...(+) - Thomann CBT 10, compact battery tester, for 1.5 V batteries, 9V blocks and miniature cells, passive layout, analog scale |
|