| Millenium : MCT-20
(1938 comments)
- LED error indicator- Battery testing LED- Logical and unambiguous LED indicator- Dimensi...(+) - LED error indicator- Battery testing LED- Logical and unambiguous LED indicator- Dimensions (WxHxD): 11.5 x 6.3 x 19 cm- Incl. measuring tips- Note: Operates with 9V battery (not included)- XLR symmetrical and asymmetrical- Jack 6.3 mm- Jack 3.5 mm- 4-Pin and 8-pin speaker twist- RCA- DIN connector (5-pin)- CAT5 (ethernet) |
|
| NTI Audio : MR Pro Minirator
(22 comments)
Analogue Audio Signal-Generator- With sine, pink and white noise- Delay test signal- Polar...(+) Analogue Audio Signal-Generator- With sine, pink and white noise- Delay test signal- Polarity test signal- Sweep signal for every frequency range- Cable test function- Impedance and power measurement- Phantom power test- Load independent output level- 512 MB Flash-Memory with USB terminal ( for storage of wave files and configurations )- Graphical back-lit display- Inputs: XLR and USB- Outputs: XLR and RCA- Operates with 3x 1.5 v AA batteries (not included)- Including bumper, USB cable and hand loop- Separately available accessories: Belt bag, power supply and cable test plug- Optional PSU: Art.240762 |
|
| TFA : Thermo-Hygrometer Colour
(15 comments)
- With coloured comfort levels for a healthy indoor climate- Hair synthetic- Casing with b...(+) - With coloured comfort levels for a healthy indoor climate- Hair synthetic- Casing with brass ring- Chrome plated- With a stand- To set up on the table or mount on the wall- Dimensions: 102 x 35 (80) x 102 (114) mm- Weight: 79 g |
|
| Millenium : MCT-30
- Divisible housing for testing long cables easily- Power supply: 2x 9V battery (not inclu...(+) - Divisible housing for testing long cables easily- Power supply: 2x 9V battery (not included - e.g. article no. 417473)- 3-Pin and 5-pin XLR connector- 6.3 mm mono / stereo jack- 3.5 mm mini jack- BNC plug- RJ45 plug- RJ11 plug- RCA plug- 3-Pin and 5-pin DIN MIDI plugs |
|
| Behringer : CT200
- 3 Modes: Cable Tester, Installed Cable Tester and Test Sound Mode- Equipped with inputs ...(+) - 3 Modes: Cable Tester, Installed Cable Tester and Test Sound Mode- Equipped with inputs and outputs for XLR, SpeakerTwist, 6.3 mm and 3.5 mm stereo jack, RCA, RJ45, MIDI and USB- LED display- Continuity testing and intermittent contact detection- Phantom power and ground test- Test tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV- Operation with 2 batteries AA (not included) |
|
| Behringer : CT100
(514 comments)
Cable Tester- Micro-Processor-Controlled cable tester- For XLR, mono- and stereo-jack (3.5...(+) Cable Tester- Micro-Processor-Controlled cable tester- For XLR, mono- and stereo-jack (3.5 mm / 6.3 mm), TT, RCA and MIDI- Detection and indication of intermittent contacts- Test of phantom power and ground loops- Build in test tone generator- Battery operation with 2x 1,5 v AA batteries (Not included) |
|
| Galaxy Audio : CM-C200
(11 comments)
- Class 2- Compliant to ANSI S1.40-1984 and IEC 942-1988- Calibration level: 94 dB and 114...(+) - Class 2- Compliant to ANSI S1.40-1984 and IEC 942-1988- Calibration level: 94 dB and 114 dB- For 1", 1/2" and 1/4" microphones- Weight approx. 200 g including battery- Including 9V-Battery and wind protection filter |
|
| Millenium : MCT-10
(639 comments)
- LED error indicator- Logical and unambiguous LED indicator- Battery testing LED- Incl. m...(+) - LED error indicator- Logical and unambiguous LED indicator- Battery testing LED- Incl. measuring tips- Operates with optional 9V battery (not included)- XLR- Jack 6.3 mm, symmetrical and- Speaker twist- RCA- DIN connector (5-pin) |
|
| Sound Tools : XLR Sniffer/Sender
(38 comments)
- With separate sender/receiver plug for testing of distant XLR connectors- LED Indicator-...(+) - With separate sender/receiver plug for testing of distant XLR connectors- LED Indicator- Including table of possible LED combinations |
|
| Palmer : Cable Tester
Cable Tester- With LED error- indicator and battery indicator LED- Logical and unambiguous...(+) Cable Tester- With LED error- indicator and battery indicator LED- Logical and unambiguous LED indicator- XLR- 6.3 mm jack, unbalanced and balanced- Speaker twist- RCA- 5 pin DIN |
|
| Digital Sound : 8930B
(1 comments)
- Battery-powered sound source- Battery life approx. 50 hours- Standard IEC 60942:2018 Cla...(+) - Battery-powered sound source- Battery life approx. 50 hours- Standard IEC 60942:2018 Class 2- Suitable for all sound level meters with mechanical microphone head according to IEC 61094-1 and 61094-4- Sound pressure level: 94 / 104/ 114 dB at 1 kHz- LED indication for battery level and for sound pressure level- Microphone hole: 13.2 mm- Dimensions (W x H x D): 130 x 60 x 43 mm- Weight: 0.2 kg- Includes 2 AA batteries- Compatible with Digital Sound 8922 (Art.132900 - not included) |
|
| Thomann : NB 4.0
- 4 RCA signals transferrable via network cable over up to 670 meters- No transmition poss...(+) - 4 RCA signals transferrable via network cable over up to 670 meters- No transmition possible using a hub or the like- Operatable only with 2 devices- No power supply needed- Incl. mounting angle- Dimensions: 92 x 70 x 25 mm |
|
| RiedConn : CEE-Test Tool
- Phase tester for three-phase networks- 3p.+N+PE/400V- Display via LCD plain text display...(+) - Phase tester for three-phase networks- 3p.+N+PE/400V- Display via LCD plain text display + LED display- In the event of a fault, exact indication of the fault- Power supply via 9V block (not included)- Handy industrial housing- Input via plug CEE16/5P/400V with cable H07RN-F 5G1.5- Neutral conductor missing- Phase missing- Neutral conductor and phase interchanged- PE missing- Rotary field check / rotary field detection- Frequency 52 HZ (generator operation) |
|
| NTI Audio : MR-PRO 70/100V Protect Adapter - Protects MR-Pro against 70V / 100V back-up voltage for impedance measurements |
|
| Millenium : SG-1
- With the built-in 1 Watt amplifier this device is ideal for (8 Ohm) speaker tests- Line ...(+) - With the built-in 1 Watt amplifier this device is ideal for (8 Ohm) speaker tests- Line output for active speaker or mixer tests- Tunable frequency between 20 Hz and 20 kHz- Power supply with 9V block battery- Output switchable between XLR line or speaker twist for the speaker test- Dimensions: 110 x 72 x 40 mm |
|
| NTI Audio : MR-2 Minirator
(4 comments)
Analogue Audio Signal Generator- Sine- Pink noise- White noise- Polarity test signal- Dela...(+) Analogue Audio Signal Generator- Sine- Pink noise- White noise- Polarity test signal- Delay test signal- Graphics-capable backlit display- XLR and RCA outputs- USB input- Powered by 3 batteries 1.5 V AA (not included)- Compatible mains adapter: Article no. 240762 (not included)- Compatible bag: Article no. 114577 (not included) |
|
| Fischer Amps : PLP
Speaker Test Device- The ideal accessory for the sound engineer- Quick testing of speaker ...(+) Speaker Test Device- The ideal accessory for the sound engineer- Quick testing of speaker systems without additional equipment- 1 W Output power at 4/8 Ohms- Tunable sine frequency of 90 Hz up to 9 kHz- Power supply with 9V battery- Speaker Twist and XLR outputs- XLR output switchable between unbalanced and balanced- Sturdy aluminium housing- With stainless-steel belt clip |
|
| Sound Tools : DMX Sniffer/Sender
(2 comments)
- With seperate sender/receiver plug for testing of distant DMX-Connectors- LED Indicator-...(+) - With seperate sender/receiver plug for testing of distant DMX-Connectors- LED Indicator- Including LED chart |
|
| Palmer : Pro MCT DMX
- Tests 3-pin and 5-pin DMX cables for continuity- Also suitable to test 3-pin XLR microph...(+) - Tests 3-pin and 5-pin DMX cables for continuity- Also suitable to test 3-pin XLR microphone cables- Automatic test or manual pin selection- LED display- Power supply: 2 X AA batteries (not included)- Dimensions: 240 x 48 x 53 mm- Weight: 0.7 kg- Incl. Mounting bracket |
|
| UNiKA : SPT-3rt
(2 comments)
- For XLR cables, microphones and loudspeakers- Consists of transmitter and receiver- Inpu...(+) - For XLR cables, microphones and loudspeakers- Consists of transmitter and receiver- Inputs: XLR for an external dynamic microphone- Outputs: XLR- Input selection: Microphone / Line / EXT microphone- Output level adjustable- Dimensions: 120 x 95 x 56 mm- Weight: 0.4 kg- Power supply via 1x 9V battery per unit (not included) |
|
(Change geographical area)
.webp)
ACCESSORIES - STUDIO/LIVE
