| Klark Teknik : EQP-KT
(188 comments)
- Class A- High-quality selection of 12AX7 and 12AU7 tubes- Custom MIDAS input and output ...(+) - Class A- High-quality selection of 12AX7 and 12AU7 tubes- Custom MIDAS input and output converters- Switchable frequency selection with up to 7 frequency settings- Independent boost and cut controls- Adjustable bandwidth for a variety of tonal possibilities- Bypass feature for A / B comparisons- Balanced inputs and outputs with Neutrik XLR sockets- 2U Rack housing- Multi-voltage car switching power supply- Designed and developed in U.K. |
|
| Behringer : FBQ1502HD Ultragraph Pro
(182 comments)
- With FBQ Feedback Detection System audio anayser- Servo-balanced inputs and outputs with...(+) - With FBQ Feedback Detection System audio anayser- Servo-balanced inputs and outputs with jack and XLR- Additional Sub-Out (XLR) with adjustable low-pass 30-200 Hz- Switchable Low-Cut- 4-Digit LED display and input level control- Illuminated faders- Design: 19" / 1U |
|
| Chandler Limited : EMI TG 12345 Curve Bender
(3 comments)
Stereo equalizer- 51 EQ points and boost / cut function- For up to 15 decibels boost / cut...(+) Stereo equalizer- 51 EQ points and boost / cut function- For up to 15 decibels boost / cut- Suitable for recording, mixing, and mastering- Connections: 2x XLR input, 2x XLR output |
|
| Drawmer : 1974
(10 comments)
- Classic sound control and transparency- Variable high and low pass filters for perfect e...(+) - Classic sound control and transparency- Variable high and low pass filters for perfect exclusion of unwanted signal components- Input impedance: > 20k Ohm- Input level max.: +26 dBu- Output impedance: |
|
| Bettermaker : Mastering Equalizer
(5 comments)
- Analog 2-channel equalizer with digital control and preset memory with 399 places- Stere...(+) - Analog 2-channel equalizer with digital control and preset memory with 399 places- Stereo, dual mono and mid / side operation with solo function- Stereo 12 or 24dB / oct. High pass filter with adjustable cutoff frequency (10 - 250 Hz) and resonance- 4 Parametric stereo filters, each with ± 15 dB gain and variable Q factor (0.2 - 2)- EQ1: 22 Hz - 470 Hz (bell / shelf)- EQ2: 90 Hz - 2 kHz (bell)- EQ3: 400 Hz - 10 kHz (bell)- EQ4: 1kHz - 23kHz (bell / shelf)- Additional passive stereo equalizer with extended hi-boost section (20 and 28 kHz) and separate frequencies for low-boost and low-cut settings- Gain Lock and Auto-Q functions- Can be controlled and automated via plug-in and USB connection- Supported formats: AU / VST / VST3 / AAX- Maximum input level: +23 dBu- Maximum output level: +23 dBu- Frequency response: 5 - 30.0000 Hz (+/- 0.1 dB)- Dynamic range:> 129 dB @ +18 dBu, 20 kHz BW- THD + N: 0.023% @ +4 dBu, 0.1% @ +18 dBu, 20-20 kHz- Crosstalk: min -90 dB @ 1KHz, max -55 dB @ 30Hz, +18 dBu, 20 kHz BW- 2 Balanced XLR inputs- 2 Balanced XLR outputs- Dimensions (H x W x D): 19 "x 2 U x 250 mm- Weight: 5.5 kg |
|
| API Audio : 5500 Dual Equalizer
(4 comments)
- Classic 550B Design- Switchable level range for finer resolution of complex sound source...(+) - Classic 550B Design- Switchable level range for finer resolution of complex sound sources or mastering- Output stage implemented with transmitter (+30 dBm)- High and low peak/shelf filters- Balanced inputs and outputs (XLR)- Additional unbalanced input TRS each channel- Internal power adapter- With hardwire bypass |
|
| Fredenstein : U1631
(2 comments)
- Analogue 16-channel LED display- Very high resolution with 31 LEDs per channel- 60 dB di...(+) - Analogue 16-channel LED display- Very high resolution with 31 LEDs per channel- 60 dB display range per channel- Connection via Sub-D25 (2x input, 2x output)- Power consumption: max. 25 watts- Integrated power supply unit- Format: 19" / 2 U |
|
| Manley : Massive Passive
(5 comments)
2 channel EQ- 4 tapes per channel- Circuit fully passive- Overlapping frequency ranges- Ea...(+) 2 channel EQ- 4 tapes per channel- Circuit fully passive- Overlapping frequency ranges- Each band offers the possibility of Shelf or Bell- Pro Band: Cut, Boost, and Off- Tube Make-Up Gain- Passive high-pass and low-pass filters- Level +4 dBU (can be switched internally to -10)- EQ Frequency control range: 22 to 27000 Hz- EQ Boost / Cut Range: 20 dB Boost / 20 dB Cut- Frequency range: +/- 2 dB: 8 - 60000 Hz- Maximum output at 1.5% THD +37 dBv, +26 dBv at 20 Hz- THD & noise (1KHz at +4 dBu): 0.06%- Noise Floor (with respect to + 4dBu): -85 dB (A Weight)- Dynamic Range: 120 dB- Bypass switch- Inputs and outputs as balanced XLR and 1/4 " jack- Weight: approx. 9.5 kg |
|
| Behringer : FBQ6200HD
(96 comments)
- Works as a feedback detector or as an audio analyser- Limiter- Pink noise generator- 2x ...(+) - Works as a feedback detector or as an audio analyser- Limiter- Pink noise generator- 2x XLR or 6.3mm jack input- 2x XLR or 6.3mm jack output- 1x XLR Mono sub output with X-Over frequency controller- Height: 3 U- Dimensions (H x W x D): 133 x 483 x 138 mm- Weight: 2.3 kg |
|
| Heritage Audio : Motorcity EQualizer Stereo Set
- Heritage Audio Motorcity EQualizer Stereo Set, contains 2x Motorcity EQualizer; technica...(+) - Heritage Audio Motorcity EQualizer Stereo Set, contains 2x Motorcity EQualizer; technical specifications per Unit: passive 1-channel analog equalizer; replica of the "MOTORCITY EQualizer"; historically accurate knob layout with custom molded Bakelite knobs; identical equalizer circuitry (including custom 1960s capacitors and inductors); 7 frequency bands across the sound spectrum from 50 Hz, 130 Hz, 320 Hz and 800 Hz to 2 kHz, 5 kHz, and 12.5 kHz with stepped rotary switches to boost or cut 8 dB in 1 dB steps; bypass switch; on/off switch; UTC replica input transformers with optimized transfer ratio; output amplifier with Carnhill transformer; connectors: 1x line input XLR, 1x line output XLR; external power supply: 100 - 240 VAC, 50/60 Hz, 0. 6A, 48V DC, 520 mA, max. 25W; Design: 19" 2U; Weight: 4.7 kg |
|
| Behringer : FBQ3102HD Ultragraph Pro
(69 comments)
- Audio Analyzer- Low-noise operational amplifiers- Servo-balanced inputs and outputs with...(+) - Audio Analyzer- Low-noise operational amplifiers- Servo-balanced inputs and outputs with jack and XLR- Additional Sub-Out (XLR) with adjustable low-pass 30-200 Hz- Adjustable Low- and Hi-Cut- 12-Digit LED display for in - and output signal- Input level control- Hard bypass switch- Illuminated faders- Design: 19" / 2U |
|
| Warm Audio : EQP-WA GainMod
(17 comments)
- With gain modification for level adjustments of two devices- CineMag input and output tr...(+) - With gain modification for level adjustments of two devices- CineMag input and output transformer - made in the USA- Premium 12AX7 and 12AU7 tubes- CineMag inductor EQ section- The EQ section can be set to bypass while the signal is still running through the tubes and transformers, thus keeping the "warmth" of the tube- Transformer balanced inputs and outputs (XLR and jack)- Linear frequency response from 20 50,000 Hz- Boost and cut can be used simultaneously to allow phase effects- Low frequency boost - 20, 30, 60, 100, 200, 400, 800 Hz - 12 dB- Low frequency cut - 20, 30, 60, 100, 200, 400, 800 Hz - 18 dB- High frequency boost - 3, 4, 5, 8, 10, 12, 16 kHz - 18 dB- High frequency cut - 3, 4, 5, 10, 20 kHz - 14 dB- 5 more additional frequency points than the EQP-1 A for greater versatility- Integrated 115 / 230 V IEC power supply- Dimensions: 19" / 2U |
|
| DBX : 231s
(192 comments)
- 2x 31 band Constant Q filters- 20 mm faders- ± 12 dB variable input gain- 4 LEDs output ...(+) - 2x 31 band Constant Q filters- 20 mm faders- ± 12 dB variable input gain- 4 LEDs output level meter- Clip LED over modulation indicator- Inputs and outputs: Balanced XLR / jack- 50 Hz Low-cut filter 12 dB/octave- ISO standard (20-20000 Hz)- Dynamic range: >108 dB- Frequency Response: < 10 Hz to > 50 kHz- Control range can be switched to ± 6 or ± 12dB- Bypass capability- Internal power adapter- Format: 19" 2 U- Weight: 2.73 kg |
|
| Manley : Massive Passive Mastering
(1 comments)
Stereo EQ- Mastering version with stepped potentiometers and changed filters for mastering...(+) Stereo EQ- Mastering version with stepped potentiometers and changed filters for mastering applications- 4 Bands per channel- Circuit completely passive- Overlapping frequency ranges- Each band offers the possibility of Shelf or Bell- Each band: Cut, boost and off- Tube make-up gain- Passive high-pass and low-pass filter- Level +4 dBU (can be switched to 10 internally)- EQ frequency control range: 22 - 27000 Hz- EQ Boost/cut range: 20 dB boost/20 dB cut- Frequency range: +/- 2 dB: 8-60,000 Hz- Maximum output at 1.5% THD dBv +37, +26 dBv at 20 Hz- THD & Noise (1KHz at +4 dBu): 0.06%- Noise floor (relative to +4 dBu): -85 DB (A Weight)- Dynamic range: 120dB- Bypass switch- Inputs and outputs as balanced XLR and 6.3 mm TRS- Weight: approx. 9.5 kg |
|
| DBX : 215s
(142 comments)
- 2x15 Band- ± 6/12 dB Input gain- 4-Segment output status LED- Dynamic range >108 dB- For...(+) - 2x15 Band- ± 6/12 dB Input gain- 4-Segment output status LED- Dynamic range >108 dB- Format: 1U- XLR / jack input/output- Internal power adapter |
|
| Elysia : museq
(2 comments)
- 100% Discrete Class-A technology- Active filter stages without coupling capacitors- A to...(+) - 100% Discrete Class-A technology- Active filter stages without coupling capacitors- A total of 2 x 5 bands- 2 x 3 Semiparametric bands- Switchable filter quality- Switchable boost/cut mode- 2 High and low shelf filters- Resonance-capable highpass and lowpass filter- Switchable warm mode for sound colouring- Rasterized and matched potentiometers- Frequency range: < 10 Hz - > 200 kHz (-0,2 dB)- Noise: 20 Hz - 20 kHz -91,6 dBu- Dynamic range: 20 Hz - 22 kHz (119 dB)- Maximum level input/output: +27/+27 dBu- Input impedance 10 kOhm- Output impedance 68 Ohm- Design: 19" Rack format 2U |
|
| DBX : 1231
(83 comments)
Graphic 2x 31 Band Equalizer- 4 LEDs for output level- 45mm faders (20 Hz - 20 kHz)- Balan...(+) Graphic 2x 31 Band Equalizer- 4 LEDs for output level- 45mm faders (20 Hz - 20 kHz)- Balanced jack and XLR in/out- Switchable ranges +/- 6dB and +/- 15dB- Format: 19" 3U |
|
| AMS Neve : 8803 Stereoequalizer
(11 comments)
Stereo Equalizer- Filters based on the design of the 8801 and 88RS analogue consoles- +/- ...(+) Stereo Equalizer- Filters based on the design of the 8801 and 88RS analogue consoles- +/- 20 dB input trim- High pass filter 25 Hz to 300 Hz 12 dB per octave- Low pass filter 3 kHz to 15 kHz 12 dB per octave- EQ High 1.5k to 18kHz- Switchable shelving / Bell and Hi Q- EQ Mid High 0.8 kHz to 9 kHz- Q range: 0.3 to 7 freely adjustable- EQ Mid Low 120 Hz to 2 kHz- Q range: 0.3 to 7 freely adjustable- EQ Low 33 Hz to 440Hz- Switchable shelving / Bell and Hi Q- EQ bypass- USB port Mac or PC- Connections: XLR / KLinke input +4 dBu, -10 dBV, XLR and parallel outputs- Ext. Power supply 100V-250V |
|
| Rane : ME15S
(3 comments)
- Rane ME15S; 15-band graphic equalizer; constant-Q bandwidth design; overall level contro...(+) - Rane ME15S; 15-band graphic equalizer; constant-Q bandwidth design; overall level control and passive bypass switches; 20-mm filter slider with ±6 dB or ±12 dB slider range; infrasonic, ultrasonic and RFI filters; balanced XLR and 1/4" TRS inputs and outputs; dimensions (WxDxH): 483 x 133 x 44 mm; weight: 3.6 kg |
|
| Elysia : xfilter
(36 comments)
- 100% Class-A topology- True stereo link- High and low shelf filter- Resonance-capable hi...(+) - 100% Class-A topology- True stereo link- High and low shelf filter- Resonance-capable highpass and lowpass filter- Two parametric mids plus switchable Q- Additional passive high band- Stepped potentiometer (computer-selected)- Special low tolerance capacitors- Continuous mass shield- Frequency range:- Noise: 20 Hz - 20 kHz -98 dBu- Dynamic range: 20 Hz - 22 kHz (-120 dB)- Maximum level input/output: +21 dBU- Input impedance 10 kO- Output Impedance 68 O- Durable and lightweight all-aluminium body- Inputs / outputs: XLR and 6.3mm TRS- Format: 19" 1 U- Weight: 2 kg- Made in Germany |
|
(Change geographical area)
.gif)
